l**u
发帖数: 731 | 1 lowes有一个skil的18v锂电池的drill/drive 100块，找个哭胖就90块，还不错。45分钟
就能充满电。 |
|
c****u
发帖数: 2078 | 2 【 以下文字转载自 SanDiego 讨论区 】
发信人: chencu (陈醋), 信区: SanDiego
标 题: 那种手持的小电钻可以钻孔用么？
发信站: BBS 未名空间站 (Tue Nov 17 16:54:46 2009, 美东)
看到target的小电钻， black and decker？ 20块，18v的似乎，能用来在木头上钻孔
么？还是只
够拧螺丝而已？ |
|
m******g
发帖数: 3667 | 3 首先申明我不知道具体的名字。这个东西和钻地的冲击钻差不多的样子，我看见
lanscaping公司用它来钻泥，一钻就一个小坑，然后把花种上去。不知道lowes或者HD
有没有卖前面那个钻头，我想把它接到我18v的drill上来钻泥洞。 |
|
|
v****e
发帖数: 19471 | 5 wireless 18V with Lithium Battery is good for 99% of the works you'll do by
yourself. |
|
v****e
发帖数: 19471 | 6 With the Makita 18V I have, one charge will last you a good 1 hour -- not 1
hour of you working, but 1 hour of the drill actually on. I was doing a lot
of work with it during the last 3 months and had to charge the battery only
three or four times. |
|
s****d
发帖数: 338 | 7 闹得，18v的无线电钻是居家DIY必备啊，太好用了； 我用的是hitachi的，试了很多还
是觉得它的手
感最好握着也最舒服，也不重。 makita也很好，但是比较贵好像。。。
not 1
lot
only |
|
|
T********g
发帖数: 642 | 9 又看了一下，这个BOSCH 12V 是不是不够POWERFUL，是不是要上18V的？ |
|
|
|
s****d
发帖数: 338 | 12 ni-cd 的电池不行吧，现在稍微好一点的工具都是用18v锂电池，持续时间很长。
skil本身的牌子倒是还不错，虽然它家最出名的好像是电锯，偶一直在用它的5'
circular saw，就非常轻便好用。 |
|
w*******g
发帖数: 9932 | 13 拆开了看了看. 真不错. 18V的电钻, sander, jigsaw, light. 才39刀. 正好有个买50
省10块的酷旁, 就买了三把油漆刷子. 加税45刀. 不错. 估计jigsaw是难用上. 不过
sander肯定管用. light也管用. 电钻比我那个12伏的要强多了. |
|
w*******g
发帖数: 9932 | 14 yeah Went to a far away place. Took me 30 minutes to get there.
Most of the local shops are sold out last week but some stores still have
plenty of them.
It is really cheap considering a 18V power drill costs 30 bucks alone.
Sanders
and jig saw cost almost as much. |
|
|
t*a
发帖数: 18880 | 16 我一个有线hitache? 一个18v black decker, 绝大部分工作 blackdecker就足够好了
，而且方便... 好久没有用那个有线的了...
.. |
|
T**J
发帖数: 3340 | 17 en，正常110v的要15A，18V的拍马也赶不上 |
|
R**R
发帖数: 3318 | 18 你不是在诱惑我吗。
这年头工具愈来愈便宜。我光钻就一大堆，好像不能再买了。
Corded: 1 把（最近给人了），Hammer drill 1 把。
Cordless: 6.3V, 9.6V,12V(最近又给人了),18V 两把。
你知道有什么新玩意吗？
Sta
the |
|
|
|
s****h
发帖数: 3979 | 21 橱柜的最上面似乎有一根3/5英寸厚，1.5英寸宽的复合板，比木头还硬，很难锯，怕把
它锯断了橱柜结构受影响
干脆就把后面的木头锯开了，很费力地用ryobi 18v reciprocating saw开了个7英寸直
径的圆洞。 |
|
b********r
发帖数: 59 | 22 今天往车库内墙的stud上面钻螺丝（2-3/4")
用的是12V Black&Decker的电钻
可没钻进去多少，电钻的十字bit就把螺丝打花了
请问下面哪个原因造成这样的结果？
1.电钻的power不够,要换18V的drill?
2.螺丝钉质量太差，重新买高质量的螺丝钉？
3.钻头太硬?
另外，往stud上钻螺丝，是不是一定要先钻pilot hole?
多谢了！ |
|
b********r
发帖数: 59 | 23 多谢大家的回复。原本以为又要再添一个18V的电钻了:)
螺丝钉是随着lowes买的Garage Wall Cabinet一起带的，看来质量确实不高。
另外可能我的pilot hole钻的也不够深
周末去买类似长度大小的deck screws再试试。
另外，我的电钻上面有1-5档加一个类似钻头形状的档位
请问是不是用1-2档上螺丝就够了? |
|
T**J
发帖数: 3340 | 24 门很简单，18v的直接一转就好，然后稍微调一下。
对了，门好像有2个版本，一种合叶往门上固定是木螺丝的，木螺丝在单独的包里；另一
种是平头螺丝直接在合页上，后者要好装的多。 |
|
g*****9
发帖数: 4125 | 25 Not sure what you consider 经济, but Dewalt 18V line is the way to go, you
can just get a kit to begin with and expand into more tools later on. I like
their cordless nailer a lot. |
|
s**********d
发帖数: 36899 | 26 black decker 18v 足够用了。再贵都是浪费，除非你的名字是RWKR. |
|
R**R
发帖数: 3318 | 27 有些工具RWKR现在也不买贵的了。如电钻。以前买过一把panasonic 9.6v cordless
drill,$225. 电钻不错，但电池会坏，而且很贵。现在Ryobi 18V cordless drill,
only $29.比光买电池还便宜。坏了换新的。 |
|
g*****9
发帖数: 4125 | 28 Dewalt is one of the best, if you want to start a collection, buy 18V, they
have most tools in that voltage, you don't need higher voltage than 18. |
|
m*****1
发帖数: 2546 | 29 i have wireless black decker tools for gardentools for 18V.
i am just not sure i want to buy wireless or not, the battery really
doesnt last that long. for example if i trim the yard, i need to change 3
batteries.
so, u said the Dewalt is the best?
they |
|
g*****9
发帖数: 4125 | 30 They are not bad, depending how much you plan to use them, they should last
a long time. But battery is usually expensive and only last a few years.
Since dewalt is used by more popular, you can find deal on them more often.
My local HD clear out last years model at least once a year, this year, I
got a few 18V kits at huge discount, it is cheaper to buy the tool kit than
to buy the battery.
Another product I would suggest is ridgid brand, since they offer lifetime
warranty if you register with |
|
|
g*****9
发帖数: 4125 | 32 To only drive wood screw, a normal 18V drill is good enough, impact driver
is for working on cars. I think you should use air tools (impact driver) if
you work on cars a lot. |
|
g**e
发帖数: 41 | 33 Thanks, I never thought a hole saw can be as large as 6 inch or more. Will a
18V cordless drill do the trick? Or I need a corded drill (don't have yet)? |
|
g*****9
发帖数: 4125 | 34 Yes, they make them that big (and even bigger)
http://www.amazon.com/Bosch-HB600-Holesaw-6-Inch-Bi-Metal/dp/B000WA4X9M
If you shop around, you can get one for less than $20.
Make a perfect round hole, cordless drill should be ok (18v Dewalt kind)
Cement siding is not easy to cut perfect using other method. Most saw blade
will dull very quickly and if your hole is not perfectly round, you will
have a tough time seal it with caulk.
a
)? |
|
g*****9
发帖数: 4125 | 35 All Dewalt 18V drill should be ok. You do not press to hard, you let the saw
do the work. Cutting cement board will dull the saw quickly if get too hot
(even carbide) |
|
R**R
发帖数: 3318 | 36 是。
Roybi 18V 的power tool 的电池通用。用的少，一般家用还可以，便宜。 |
|
H******7
发帖数: 34403 | 37 可能是喷水的控制线，也可能是电力线，比如室外照明的，室外用电一般只有18V，当
然，电力线的话应
不只一根 |
|
H******7
发帖数: 34403 | 38 基本正确。其中做棚子和铺电线要city 批准。室外要18V的不是110V的。电线不知什么
时候铺。
还是不要铺水泥了，铺砖吧。后悔了又可以拆掉重搞，同时电线也可以随时铺。
砖是直接铺沙子上的，不是铺水泥上的， |
|
w******t
发帖数: 441 | 39 用什么？
18V flood light是干这个用的吗？可以挂棚子上么？ |
|
e********t
发帖数: 9607 | 40 homedepot有一个black and decker 18V充电的，$99
还有一个homelite用汽油的，今天特价$62
买哪个好呢？这两个在homedepot网站上评价都一般。
想买便宜的用汽油的。
不过二冲程的发动机，汽油和机油要混合，还要给它专门配一个油桶，也挺烦的。
四冲程的太贵了。
我就是用来修修跟水泥地接触的边缘，院子里没几棵树。 |
|
|
|
t*a
发帖数: 18880 | 43 是，18v B&D应该足够用。
H家的有线更强劲，不过有了电池的，好久没有动那个Hitachi的了俄。 |
|
s****i
发帖数: 2993 | 44
了。
as soon as you do any wood work (fixing deck, fence),
you'll know 18v is not enough. |
|
g*****9
发帖数: 4125 | 45 You need to a have a few handy friend come over on weekend to help, it is
not easy as one person job.
18V portable drill with more than 1 battery and a step ladder, the entire
thing is bolted together in all the sets I helped put together. |
|
|
k**u
发帖数: 10502 | 47 10.8V的电钻没劲，至少要14.4V的，18V更好。
电锯就不要想了，一定要有线的。 |
|
|
m*****a
发帖数: 382 | 49 你可以去你附近的costco看看,他家有一个kawasaki的 18V cordless drill,用起来不
错,我记得是35刀. |
|
j***b
发帖数: 5901 | 50 Mine was bought last thanksgiving. A drill, jigsaw, sander, and flashlight. I can't remember the price. But I think it's around $50 something, and it's 18V. |
|
