y*****n
发帖数: 6302 | 1 ☆─────────────────────────────────────☆
dragonben (DaBen) 于 (Fri Jan 7 22:09:53 2011, 美东) 提到:
有个还行的声卡。能不能给推荐的麦克（好一点）。还有你们用什么软件？除了这两样
还有什么是一定必须的？刚开始不想搞得很fancy. 看了精华区那个介绍，有点儿太复
杂。晕。
☆─────────────────────────────────────☆
xumin (闲云野鹤) 于 (Fri Jan 7 22:15:46 2011, 美东) 提到:
samson c01u
☆─────────────────────────────────────☆
dragonben (DaBen) 于 (Fri Jan 7 22:34:48 2011, 美东) 提到:
en,收到。那软件呢？
☆─────────────────────────────────────☆
xumin (闲云野鹤) 于 (Fri Jan 7 22:41:23 2011, 美东) 提到:... 阅读全帖 |
|
g**o
发帖数: 3033 | 2 Roland F-120?
DC In jack
Pedal connector
Input jack: Stereo miniature phone type
Output jacks (L/Mono, R): 1/4-inch phone type
MIDI connectors (In, Out)
Headphone jack x 2: Stereo 1/4-inch phone type
你要USB干嘛用呢？
USB无非录音和MIDI，现有的接口这些功能都实现了。 |
|
L****n
发帖数: 12932 | 3 刚买了NEX6, 除了local试了一下5N和7， 其它就是纸上谈兵了， 说说理由：
5 和6/7的差别主要是EVF，操控和外接：
6/7带目前最好的EVF
操控各有不同， 5N是触控，review很好， 我个人不是很喜欢， 屏幕上弄很多手印。
7是joystick, 6是classic。
外接， 5N是proprietory connector, choice少且贵。 7是A connector, 6是新出的
MIS。 主要除了外闪，sony video cam的外接亦可通用。 |
|
|
L*****k
发帖数: 13042 | 5 It should be able to charge even if your battery is completely out
of power. You might need to connect this to a wall charger with
enough power rating, as sometimes a computer's USB port cannot
provide enough electric current.
It is just an alternative to USB port charging; it goes through
the same circuitry, as you can tell that the other end of the
cable is a USB connector. But if the charging circuitry is
bad instead of the connector port itself, this method won't work.
Your only choice is to... 阅读全帖 |
|
b*s
发帖数: 82482 | 6 USB-SCSI adapters
Microtech Xpress USB蔖rice: $79蔄vailability: Jan. '99
Performing at 1.2 MB/sec. (vs. SCSI-1's 4-5 MB/sec.), the adapter is
designed with a USB connector on one end and a male, SCSI DB25 connector at
the other.
Formac combo card [German]蔖rice: NA.蔄vailability: NA.
Formac is developing a 16-bit Ultra Wide SCSI mezzanine card, as well as a
tuner/video card for the iMac. |
|
a***y
发帖数: 19743 | 7 。。。
pre-order的时候你可以多买一套。
比如家里一套，办公室一套。
而且Dock和dock connector不一样。
Dock可以竖起来。Dock connector只是和iPhone iPod一样的充电的线。
得买 |
|
h***l
发帖数: 244 | 8 谁知道IPAD 4G和Apple Digital AV Adapter接上全高清电视看电影能有1080P吗？不知
道下面的这段内容是不是根据新的ipad更新了。还是苹果故意想让这个支持1080P，避
免和APP TV冲突？Apple Digital AV Adapter里的芯片需要更新？
Use the Apple Digital AV Adapter to mirror whatever’s on your iPad or
iPhone 4S screen — apps, presentations, websites and more — on your HDTV
or HDMI-compatible display in up to 1080p HD (films play at up to 720p).
Watch slideshows and films on the big screen in up to 720p by connecting
your iPad, iPhone 4 or iPod touch (4th generation) to an HDTV or H... 阅读全帖 |
|
w********1
发帖数: 3492 | 9 Thu, 12 Jul 2012 13:28:41 PDT
A newly-published Apple patent application (via AppleInsider) reveals Apple'
s interest in exploring the use of the iPod nano's clip as a charging and
docking mechanism, a move that would eliminate the need for a dedicated
docking port on the bottom edge of the device as found in the current design.
By incorporating electrical contacts into the clip and using a dock adapter
to provide compatibility with Apple's current docking stations, the clamping
action of the iP... 阅读全帖 |
|
w********1
发帖数: 3492 | 10 Thu, 19 Jul 2012 14:36:33 PDT
As it has for past versions, Other World Computing has released its
aftermarket SSD upgrades for the latest MacBook Air models released last
month.
Along with minor upgrades to memory and processor configurations, Apple also
included a new SSD connector, likely to accommodate the new 500 MBps SSDs
that Apple has built in to the new machines. As a result of this new
connector, it took OWC a few weeks to build compatible aftermarket drives.
Other World Computing's Mer... 阅读全帖 |
|
f***e
发帖数: 515 | 11 LD这一个月一直用一个输出DC5v， 1000mA的AC adapter链接connector给Ipod touch充
电。这两天把connector连到电脑usb上，发现电脑无法识别ipod touch了，也无法充电
。只有连回到AC adapter上才能继续充电。请问是不是高电压把ipod touch什么识别部
件给弄坏了？有没有自己修的办法？谢谢 |
|
p******9
发帖数: 7130 | 12 这篇文章基本就是胡扯，其逻辑跟所有手机都是过渡鸡类似。30-pin connector已经用
了12年了，第一次出现是3rd gen ipod classical。12年对于消费电子产品意味着什么
？按照本文的逻辑，三丧几十个connector都是为了收钱才设计的。 |
|
h**********m
发帖数: 87 | 13 Pile of crap!
G is under no obligation to make anything for Apple to start with, let along
that this app is free. Apple pissed a lot of people off by changing and
charging excessively for the new connector on the ip5 and thus rendering it
incompatible with all devices with the previous connector.
Had G charged $5 for the app, people would still pay for it just to stay
away from the crappy iMap. |
|
B*****c
发帖数: 404 | 14 iphone 4s自从用了apple tv之后，经常性的没声音，有的时候音量bar全部消失，有的
时候是默认连到dock connector （关键是我没有dock connector），选项中还只有这
个和apple tv，没有办法选iphone。
网上搜了一下，清理了一下那个接口，好像没用啊。
万能的apple版，帮下忙，怎么搞，多谢。 |
|
d*b
发帖数: 21830 | 15 从你们这些反应基本可以看出apple用户的技术背景。
计算机用的电路板光板按装元件前，无论是激光焊接还是热风焊接，都需要在上面涂
solder mask,大型元件还要用红胶固定，元件安装完后，都有水洗工序清洗残留在电路
板上的solder mask和红胶。所以基本上所有的笔记本主板都不会因为浸水而损害，笔
记本进水后开不了机，主要是connector短路，电源短路造成的。connector的pitch一
般都只有0.5毫米，这种短路你根本不能用所谓的吹风解决问题。r需要水洗才能恢复，
工业上常用的比如MG Chemical的：
很多人对行业不了解，也没有first hand的经验，单凭自己的想象就指指点点。 |
|
x***y
发帖数: 633 | 16 Hi, friends, I have a very urgent problem about mysql binlog latency, and
any help is greatly appreciated!
Here is my scenario:
We use ec2 instance running https://github.com/shyiko/mysql-binlog-connector
-java to read binlogs from an aws rds mysql master (which is row based
replication and bandwidth and throughput are not an issue).The number of
binlogs is around 1k per second. The P99 network IO is about 50ms and the
P99 time between 2 IOs is about 90 ~ 100ms.
However, when we extract the time... 阅读全帖 |
|
f**y
发帖数: 26 | 17 I receive the unit from frys a few days early. I really like the look. The
mirror finish is really cool. The unit appears to be high quality. A hugh
number of power connectors. It supports SLI as well.
Well, I got my motherboard today. Connect it up with my old 350W power
supply, everything works, but the old one doesn't have PCI-E connector,
switch to the brand new Ultra 600W unit.
Wow, it was so quiet, I couldn't hear anything running..... after double
checking, nothing was running. The piece |
|
c******e
发帖数: 737 | 18 My son's Toshiba A25 S279 doesn't boot up after press the power button. Only
the power indicator light up but nothing else seems be powered. I doubt
something wrong with the AC/DC adaptor. It is a HiPower EA11203A adaptor
with 15V output. The connector has 4 pins. Anybody know how those 4 pins are
configured so I can test it?
Here is the picture of the connector:
http://www.laptoppartsnow.com/tosaa2a2a2se2.html |
|
n******7
发帖数: 5678 | 19 4670是不用power connector的性能最好的卡，比它强的卡都要用power connector。 |
|
n******7
发帖数: 5678 | 20 4670是不用power connector的性能最好的卡。比它强的卡都要用power connector。 |
|
|
x*****s
发帖数: 952 | 22 Processor Intel® Core™2 Duo E5200 (2.5GHz, 2MB L2, 800MHz
FSB)
Operating System Genuine Windows 7 Home Premium 64 - English
Keyboard/Pointing Device 104-key wired keyboard (USB connector), Wired
optical wheel mouse (USB connector), Hybrid TV tuner, Philips® remote
control (40/45 button)
Total Memory 4GB (2 X 2GB) PC2-5300 DDR2 667MHz SDRAM SODIMM Memory
Hard Drive 640GB, 7200RPM Serial ATA 2.5" Hard Drive
Display Monitor Not Included
Graphics Intel |
|
|
|
w******t
发帖数: 441 | 25 解决了。。。第二块硬盘的SATA接口connector掉了一小块塑料，插不紧
那个connector只要稍微一碰，机器就reset... |
|
j*******h
发帖数: 520 | 26 各位前辈，
本人最近自己diy了一下
biostar a880g+的板子 with on board video card， 24pin power connector
AMD athlon x3 450 cpu
patriot 8 g ram
Seagate 1tb 5900 rpm hard drive
cooler master haf 912 chassis
cooler master gx 650w psu， 20+4pin power connector
问题就出在这个酷冷至尊的电源上了。
我上周四从newegg收到电源，兴匆匆全安上，但是只看到风扇转了两秒钟，电源指示灯
亮了一下，然后就完了，电脑起不来。当时我就懵了。
幸好手头有一个305瓦的dell旧电源，正好也是24pin的，于是装上，由于只有305w，所
以没敢接机箱带的风扇，（两个都是12cm的）机子一下就起来了，并装了系统，而且之
后开一天机都没有问题。
之后，我从新接cooler master 的电源，还是开不了。据此，我只能判断是酷冷至尊电
源的问题，所以花10.5刀运费办理了newegg的退换。
今天，收... 阅读全帖 |
|
A****a
发帖数: 988 | 27 The external connector and cable have a design-life of over five thousand
insertions and removals, whereas the internal connector is specified to
withstand only fifty.
http://en.wikipedia.org/wiki/Serial_ATA |
|
r***o
发帖数: 3058 | 28 wndr4500 呢。。 我在用。。 很好用啊， 挂了2个硬盘 600mhz 的cpu ， 128mb 的flash 和 ram ， 但是暂时不能刷ddwrt。。
CPU1: Broadcom BCM4706 (600 MHz)
FLA1: 128 MB (Samsung K9F1G08U0D-SCB0)
RAM1: 128 MB (Samsung K4T51163Q1-HCE6 x 2)
Expansion IF types: USB 2.0
USB ports: 2
WI1 chip1: Broadcom BCM4331
WI1 802dot11 protocols: an
WI1 MIMO status: 3x3:3
WI1 antenna connector: U.FL
WI2 chip1: Broadcom BCM4331
WI2 802dot11 protocols: bgn
WI2 MIMO status: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM4706
Switch: Broadcom B... 阅读全帖 |
|
l*i
发帖数: 5732 | 29 Dell的是不是对显卡的要求低？ 韩国的只有几种外接显卡可以用：
Dell的spec：
CONNECTIVITY
High Definition Multimedia Interface (HDMI)
2 Digital Visual Interface connectors (DVI-D) with HDCP
DisplayPort (DP)
Video Graphics Array (VGA)
Component Video
Composite Video
1 USB 2.0 upstream port
4 USB 2.0 downstream ports
8 in 1 Media reader
DC power connector for Dell Soundbar |
|
d*b
发帖数: 21830 | 30 电池本来就是会动的，design feature, 目的是保护主板上的触点。当笔记本跌落时不
会把冲击传到主板上。
另一种设计方案是把电池固定死，把主板上的馈电触点从主板上拆下来，专门用一个
connector拧在机身上，再用FCP接到主板上。用这种设计思想的比如lenovo的电源插口
，你看看是不是也是活动的？
你弄我的设计还属于比较简单的，复杂的比如SONY的高级机型，连USB，audio都是这种
柔性连接。但全是柔性连接的话，一旦connector/FCP出问题就麻烦了（这也是Sony最
多的故障）。
所以lenovo的设计采用了比较折衷的方案，high tension的用柔性连接，low tension
的还是直接焊接在主板上，比如USB。。。 |
|
c**2
发帖数: 8496 | 31 you mean analog cable channels? because digital cable here needs the 机顶盒,
according to the cable guy.
10+ years ago when many people in my then-apartment complex stole standard
cable(analog) because the cable connectors were in an unlocked box outside
the building. People just connected all the cable themselves. One day cable
guy came and knocked on every door and ask if tenants wanted cable service,
of course people say no and all the standard cable channels are gone. That
night, we opened th... 阅读全帖 |
|
c*******d
发帖数: 1197 | 32 还是最近买的thinkcenter M82， 才买了个 WD blue的 1TB硬盘加上去（没有任何其他
bios 等等的设置）， 一开机， 尖叫了几声， 出现 power fan failure， 我也没动
什么线啊， 开始的屏幕也能识别出我安装的硬盘的型号， 屏幕上给我两个选择 F1
setup， F2 resume， 按了F2后可以继续进入windows。 但是我担心是不是到底有个啥
风扇没有运作， 如果这样运行windwos对机器有影响。 我断开第二个硬盘的数据和电
源线， 重新开机，还是有同样的问题。
于是查了一下安装手册（m82m92p_tower_ug_en.pdf）， 首先从图 1 发现 power fan
connector的位置是 15， 但是我看了一下，什么线也没连这个啊， 继续往下，走到图
2这页， 发觉好像安一个什么front fan才用得着这个power fan connector吧， 然后
其余风扇 机器应该就只有电源那儿一个， cpu上面一个吧。
牛牛们帮我看看， 有些牛人这不就也帮我看过这个机器，选择硬盘，内存啥的，而且
这个M82 让我很郁闷的... 阅读全帖 |
|
h**2
发帖数: 2841 | 33 嘿嘿，果然又是一个忘了插cpu power connector的
no，CPU fan口要查，但不是cpu power connector，那是个单独供电的4 pin/8pin口子 |
|
r*********2
发帖数: 108 | 34 原电脑坏了看了楼主的贴现在想买T440p了
通过www.oo.com点进去的链接：
http://shop.lenovo.com/perksoffer/us/en/laptops/thinkpad/t-seri
下面是官网的选择不知道哪一个选项能选成屏幕是用IPS？请帮忙看看，多谢您的回复！
Processor
ProcessorHelp me decide
Intel Core i3-4000M Processor (3MB Cache, 2.40GHz)[subtract $50.00]
Intel Core i5-4200M Processor (3MB Cache, up to 3.10GHz)
Intel Core i5-4300M Processor (3MB Cache, up to 3.30GHz) -vPro[add $55.00]
Intel Core i5-4330M Processor (3MB Cache, up to 3.50GHz)[add $105.00]
Intel Core i7-4700MQ Processor (6MB Cache, up to ... 阅读全帖 |
|
Z**0
发帖数: 1119 | 35 真是厉害。thumb up！
依据网上的信息，一共有两个fuses，都要检查。
“I looked under the LCD connector on the board and I saw two conponents
right below the connector one towards optical drive (labels P and green in
color) and another one towards the CPU (labeled F, aslo green in color).”
LCD |
|
r*********2
发帖数: 108 | 36 想买T440P了，
这个是官网的选择不知道哪一个选项能选成屏幕是用IPS的？请帮忙看看，多谢您的回
复！
Processor
ProcessorHelp me decide
Intel Core i3-4000M Processor (3MB Cache, 2.40GHz)[subtract $50.00]
Intel Core i5-4200M Processor (3MB Cache, up to 3.10GHz)
Intel Core i5-4300M Processor (3MB Cache, up to 3.30GHz) -vPro[add $55.00]
Intel Core i5-4330M Processor (3MB Cache, up to 3.50GHz)[add $105.00]
Intel Core i7-4700MQ Processor (6MB Cache, up to 3.40GHz)[add $155.00]
Intel Core i7-4600M Processor (4MB Cache, up to 3.60GHz) -vPro[add $245.... 阅读全帖 |
|
l********o
发帖数: 17 | 37 还有那个 bridge board connector,它是一个80pin 0.8mm间距的插口 ,Pci-e的插槽
都是1mm的间距。。找不到这样的PCIE 4X啊
而且 pcie4x 的插口是 22+42pin的 这个bridge board connector 是36+44pin的
需要做何修整呢？ |
|
i****x
发帖数: 17565 | 38 不懂 只知道用起来足够
查了一下66的spec
CPU1: Broadcom BCM4706 (600 MHz)
FLA1: 32 MiB (Spansion S29GL256P10TFI01)
RAM1: 256 MiB (Samsung K4T1G164QF-BCF7 x 2)
Expansion IFs: USB 2.0, microSD
USB ports: 2
WI1 chip1: Broadcom BCM4331
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Broadcom BCM4331
WI2 802dot11 protocols: an
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL, RP-SMA
ETH chip1: Broadcom BCM4706
Switch: Broadcom BCM53125
LAN speed: 10/100/1000
LAN por... 阅读全帖 |
|
a*****a
发帖数: 1429 | 39 一下出了两个，Archer C8和Archer C9.前者AC1750，后者AC1900
Archer C8 MSRP $155美元，Amazon有售，卖140。这个价格有点高，考虑到Netgear
Nighthawk是AC1900，打折才130，这个C8应该会降价
Archer C9还没有开卖。
这两个路由器是TP-Link首先开始支持beamforming的。
和大部分其它高端路由器一样，Archer C8和C9采用Broadcom芯片。
Archer C8:
CPU1: Broadcom BCM4709 (1 GHz, 2 cores)
FLA1: 16 MiB (Brand? Model?)
RAM1: ? MiB (Brand? Model?)
WI1 chip1: Broadcom BCM4360
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Broadcom BCM4331
WI2 802dot11 protocols:... 阅读全帖 |
|
d******d
发帖数: 52 | 40 四年老的自己装的机器： gigabyte GA-880GM-UD2H AM3 880G , SB710的主板， Antec
MT-352 的小号电源。
今天忽然开机失败。
若把ATX connector从主板上拔下来，则按下power button后CPU fan， case fan都能
转动 （因为他们都是直接接在power supply 上）， power supply的voltage输出也都
正常。
但是若把ATX connector连在主板上，则开机后cpu fan，case fan稍微动一下就停止，
测量power supply输出是0V。
想请教高手： 是电源坏了还是主板坏了？
谢谢！！！ |
|
D***3
发帖数: 12712 | 41 看电源
如果电源有8-Pin 或两个 6-Pin Power Connector
可以随便买
如果没有pcie Power Connector
就要买低压版的 |
|
|
z*********e
发帖数: 10149 | 43 这个月处给t440p换了个屏幕，原来的是768p,换了个fhd的，不是一般的容易，根本不
用键盘和下面主板的东西，用手就能把screen bezel扣下来，然后只有4个固定panel的
螺丝，生手5分钟能搞完
*40后面的是30pin edp connector, *30之前的是40pin lvds connector,不能混用，
lvds转edp有个专门的转接pcb，国内好买一些，这边不太好买。
如果你的也是768p tn 屏幕，40块左右能买到fhd ips的，换了我觉得还是很值。一是
显示的内容多，二是看起来舒服些。
当然ebay上奸商很多，我买的AUO fhd ips，寄来个chi mei fhd tn的，退了重新买了
一块。这个好像是普遍问题，tp forum上看到好多人都是寄来的型号跟买的不同。 |
|
|
f*******3
发帖数: 584 | 45 Check your Cable Grounding condition ----- at the place that the Cable
entering your house, you should see a connector of which connect the outside
cable and the cable into your house. It should have a ground wire from that
connector to the ground. In many cases, the cable guys did not make that "
ground" well to the ground. So, check it to make sure it is grounded. |
|
r****y
发帖数: 26819 | 46 我用不到很复杂的UML功能，主要就是code<->diagram，问题是我用过的UML工具操作
起来都不方便，比如MyEclipse，移动classbox以后不能自动更新connector。
Visual Paradigm好一点点，但还是不够，connector不会自动优化。希望能有
photoshop，Flash那样顺手的。有什么好的推荐吗？Together和rose比较起来怎么样？ |
|
w******o
发帖数: 32 | 47 本人完全新手，有一门课的作业要用到这个。
我已经配置好了tomcat 7.0.16和jdk1.6.0_26。
也配置好了mysql。
下载了mysql-connector-java-5.1.16。按照网上的教程，把mysql-connector-java-5.
1.16-bin.jar 放到了 tomcat的lib下面。
然后用mysql创建了database和table，
但是按照教程在tomcat\Root下面创建了test.jsp，然后再浏览器中打开http://localhost:8080/test.jsp总是显示http错误。
请问大家该这么做呢？
试了好多网上的教程多不对，然后我java基本上也是空白，刚刚开始学。
请教达人有教程，或是这点该从哪入手？多谢各位。 |
|
