t**d
发帖数: 6474 | 1 把主板电池拔下来让CMOS重置一下看看。有些奇怪的毛病跟CMOS里面的电位错误有关。
冲突
disa |
|
U**I
发帖数: 12 | 2 【 以下文字转载自 Linux 讨论区 】
【 原文由 UTSI 所发表 】
I installed WinXP then fedora on my PC, and when reboot,it can let me select
which OS to boot.
However,due to XP problem,I have to reinstalled XP, then the bootloader disa
ppear.
I tried use fedora to update and select load bootloader in the bootsector or
MBR, or use force LBA32
all can not install the bootloader. And I still can only boot to XP.
Then I tried reinstall fedora, but after 30more min installation, I still
can not see the bootloader.
Did I miss |
|
s*******0
发帖数: 3461 | 3 hi
I can not type Chinese these days, sorry. I may reply you more detailed in the
future.
the medical insurance in China is in health area. it is very difficult
to handle the premium and control the risk of the medical insurance.
the loss ratio is very high.
and there are few actuaries in the health insurance area in China. I mean taking
the FSA exams of the health insurance.
The health insurance according to the regulation in China can be devided
into medical, long term care, disease, and disa |
|
ET
发帖数: 10701 | 4 speed: telscopic > folded > 2-stage
gain: 2-stage > folded = cascode ,这个其实也未必
表达式都是(gmro)^2
区别是2-stage可以不断的加stage或通过调整size来增加gain, folded/cascdoe也可以
不断的cascode，直到不能cascode为止。generall speaking, 2-stage可以更大。
output swing - 2-stage>folded> telescopic
2-stage output = vdd - 2*vdsat
folded outputswing = vdd - 4*vdsat
telespci outputswing = vdd = 4*vdsat-vth
power disa - telesocpi > 2-stage> folded
主要是telesocpi 一个current biasing就行， 2-stage/folded都需要2个。至于2-sta
ge & folded谁用多少，可能还要看具体情况。
noise - 如果看nois |
|
o****e
发帖数: 195 | 5 If I were you, I would shoot for the June LSAT test. Right now, I would focus
on finding an IP-related job first. Once you land the job, have a feel of
what's going on, that will give you a lot of security.
Then by next march or april, you can worry about LSAT. The application
process is not very controllable by you, but the job search is. Once you have
a job, everything else can be negotiated. But if you just jump ahead and
start preparing for the LSAT right now, it will put you in a disa |
|
u*r
发帖数: 9 | 6 lots of studies have been done on the second question, and although there is
some controversy, most evidences suggest that economic development is
conducive to democracy, which is quite intuitive...
there seems to be much fewer study on the first one. maybe pzerworski 2000 is
an exception, and he seems to be saying that there is no definitie answer to
the question whether democracy is good for economic development. democracy can
hardly generate economic miracle, but rarely leads to economic disa |
|
j*****e
发帖数: 182 | 7 First of all, you did not tell the whole story.
What kind of outcome do you have? What is the modeling distribution and what
is the link function here? By default, it is normal with identity link. Is
this what you want? If so, what not use proc mixed?
Second, what does weight=c means?
Third, you can write two class statements, one with provfs and one with b
using the options that I gave.
You have to understand the parameterization of linear models before you use
SAS. Otherwise, it will be a disa |
|
D*****I
发帖数: 8268 | 8 里面不是关键，没sports package的？四幅方向盘？你到时候买了又要心痒痒的
belt不算难换，手动的是电子风扇，很好拆，拆了风扇以后前面就空间挺大的
多少miles了？可以换belt的时候把冷却系统的塑料管子tank什么的都换了，如果没换
过的话，这也是个杀价的点，02年的车开到现在不管多少Miles，冷却系统除了
radiator之外全都要换了
其次你要看是否漏机油，问车主valve cover gasket换过了没有，02年的现在已经根石
头一样硬了；打开机油盖看看有没有白色油膏状物质，没有为好；你也要问车主DISA换
了没，很有可能也不灵了
车窗regulator换过没？不然都会坏
试开的时候开一下空调，开个几分钟再管掉，闻一下又没有异味
还有一个大头是问问vanos的o-ring换了没
去年e46有个尾灯的recall,你可以问问车主做了没有，不然可以去dealer那边做recall
顺带着免费检查一下。
control arm bushing换过了没？刹车时候方向盘抖一下么？
麻烦 |
|
i**w
发帖数: 883 | 9 我的Asterisk方案是：
1. Nonoh, SIPGate 和 Gizmo5都注册到Asterisk上（理论上，可以注册任意多个voip
service到Asterisk），ATA在注册到Asterisk上
2. 每个房间设置一个分机号，分机之间可以互拨
3. incoming的电话，默认是Living Room的分机响铃，但用房间其他分机也可以pick
up
4. outgoing的电话，根据拨号前缀决定走那条voip线路。
美加的电话可以用GV+SIPGate（缺点是接通时间稍长，优点是完全免费且没有通话时间
限制），也可以用GV+Gizom5（缺点是只能通话3分钟，优点是免费+接通比GV快）。当
然，也可以用nonoh（前120天免费）
中国的电话用nonoh，而且直接用国内的拨号规则，0+城市区号+电话号码，自动用0086
替换前缀0
5. DISA，这个是Asterisk的亮点。当你不在家的时候但是需要打国际长途的时候，用
任何手边的电话拨打自己的SG号码，一定时间内输入access code，会提示你输入密码
，之后电话出现等待拨号音，就可以象在家里一样，用nonoh |
|
g**d
发帖数: 723 | 10 大师这个是什么?
DISA access code |
|
g**d
发帖数: 723 | 11 我要吐血了.
SetCallerID("Name" [|a])
Deprecated in 1.2, removed in 1.4.
这个function 1.6里没有, 导致我的call-with-sipgate就没注册上. 一行一行的试出
来的.
现在800是打的通了. 这个DISA没搞定. 我打我的GV number进不来:
[Apr 10 21:47:52] -- Goto (answe-incoming,s,1)
[Apr 10 21:47:52] -- Executing [s@answe-incoming:1] PlayTones("SIP/
sipgate-0000001b", "ring") in new stack
[Apr 10 21:47:52] -- Executing [s@answe-incoming:2] Read("SIP/sipgate-
0000001b", "CHOICE,,2,,,5") in new stack
[Apr 10 21:47:52] -- Accepting a maximum o |
|
i**w
发帖数: 883 | 12 DISA就可以做到这个
========================================================
在外面拨打家里的电话，怎么transfer到出去，比如到中国。
======================================================== |
|
k******t
发帖数: 163 | 13 allow=ulaw
g729无法工作。（CPU太差）
[myDISA]
exten => s,1,Answer()
exten => s,n,Read(OUTNUM)
exten => s,n,Goto(dial-800,${OUTNUM},1)
exten => s,n(end),Hangup
如果由外线拨入GIZMO工作正常：
-- Executing [s@myDISA:1] Answer("SIP/Gizmo1-00000003", "") in new stack
-- Executing [s@myDISA:2] Read("SIP/Gizmo1-00000003", "OUTNUM") in new
stack
-- User entered '005388888'
-- Executing [s@myDISA:3] Goto("SIP/Gizmo1-00000003", "dial-800,
005388888,1") in new stack
-- Goto (dial-800,005388888,1)
-- Exec |
|
k******t
发帖数: 163 | 14 这个问题以前ianw 兄好像有提过？
不知道有解决吗？ |
|
f*u
发帖数: 5576 | 15 [modules]
autoload=no
load => format_pcm.so ; uLaw/ALaw
load => codec_ulaw.so ; mu-Law
load => format_g726.so ; Raw G.726
load => codec_g726.so ; g-726
load => format_gsm.so ; Raw gsm
load => codec_gsm.so ; gsm Coder/Decoder
load => app_dial.so ; Dialing
load => app_macro.so ; Extension Macros
load => app_playback.so ; Sound File Playback
load => app_mixmonitor.so ; Record calls
load => app_... 阅读全帖 |
|
f*u
发帖数: 5576 | 16 [modules]
autoload=no
load => format_pcm.so ; uLaw/ALaw
load => codec_ulaw.so ; mu-Law
load => format_g726.so ; Raw G.726
load => codec_g726.so ; g-726
load => format_gsm.so ; Raw gsm
load => codec_gsm.so ; gsm Coder/Decoder
load => app_dial.so ; Dialing
load => app_macro.so ; Extension Macros
load => app_playback.so ; Sound File Playback
load => app_mixmonitor.so ; Record calls
load => app_... 阅读全帖 |
|
t***n
发帖数: 546 | 17 缺省的module.conf几乎什么都没有load，连jabber都用不了。 下面是我现在用的，能
帮忙看看缺什么
吗？
[modules]
autoload=no
load => func_odbc.so ;NEW ADD BY MY SLET FOR THE Function DB not
load => format_pcm.so ; uLaw/ALaw
load => codec_ulaw.so ; mu-Law
load => format_g726.so ; Raw G.726
load => codec_g726.so ; g-726
load => format_gsm.so ; Raw gsm
load => codec_gsm.so ; gsm Coder/Decoder
load => app_dial.so ; Dialing
load => app_macro.so ... 阅读全帖 |
|
t***n
发帖数: 546 | 18 autoload=yes crashes the asterisk, lot's of modules cannot be found.
did some research, seems function DB_EXIST is not available.
Here is some result from asterisk debug console:
tomato-asus-rt-n16*CLI> module show
Module Description Use
Count
res_adsi ADSI Resource 0
res_jabber.so AJI - Asterisk Jabber Interface 0
format_pcm.so Raw/Sun uLaw/ALaw 8KHz (... 阅读全帖 |
|
t***n
发帖数: 546 | 19 缺省的module.conf几乎什么都没有load，连jabber都用不了。 下面是我现在用的，能
帮忙看看缺什么
吗？
[modules]
autoload=no
load => func_odbc.so ;NEW ADD BY MY SLET FOR THE Function DB not
load => format_pcm.so ; uLaw/ALaw
load => codec_ulaw.so ; mu-Law
load => format_g726.so ; Raw G.726
load => codec_g726.so ; g-726
load => format_gsm.so ; Raw gsm
load => codec_gsm.so ; gsm Coder/Decoder
load => app_dial.so ; Dialing
load => app_macro.so ... 阅读全帖 |
|
t***n
发帖数: 546 | 20 autoload=yes crashes the asterisk, lot's of modules cannot be found.
did some research, seems function DB_EXIST is not available.
Here is some result from asterisk debug console:
tomato-asus-rt-n16*CLI> module show
Module Description Use
Count
res_adsi ADSI Resource 0
res_jabber.so AJI - Asterisk Jabber Interface 0
format_pcm.so Raw/Sun uLaw/ALaw 8KHz (... 阅读全帖 |
|
i**w
发帖数: 883 | 21 5是用asterisk的call file.
6是用asterisk的DISA |
|
i**w
发帖数: 883 | 22 For 2 a, check DISA() from Asterisk
For 2 b, just Dial() whatever you pre-set number
For 2 Or, Authenticate() then ...
http://www.mitbbs.com/clubarticle/voip/31219401_3.html
PS: My dialplan was written in AEL (Asterisk Extension Language), much
easier to maintain than the regular extension.conf |
|
t***n
发帖数: 546 | 23 鉴于有人要求详细配置，现在把几个配置文件贴出来，欢迎大牛们指正
gtalk.conf***********************
[general]
context=google-in ; Context to dump call into
allowguest=yes
[guest] ; special account for options on guest account
disallow=all
allow=ulaw
context=google-in
[dummy-gtalk]
username=d***[email protected]
disallow=all
allow=ulaw
context=google-in
connection=dummy
[user3-gtalk]
username=u***[email protected]
disallow=all
allow=ulaw
context=google-in
connection=user3
[user1-gtalk]
username=u***[email protected]
disallow=all
... 阅读全帖 |
|
r*****8
发帖数: 2697 | 24 下面是modules, 有可能是我的Asterisk版本有问题
[modules]
autoload=yes
load => format_pcm.so ; uLaw/ALaw
load => codec_ulaw.so ; mu-Law
load => format_g726.so ; Raw G.726
load => codec_g726.so ; g-726
load => format_gsm.so ; Raw gsm
load => codec_gsm.so ; gsm Coder/Decoder
load => app_dial.so ; Dialing
load => app_macro.so ; Extension Macros
load => app_playback.so ; Sound File Playback
;load => app_mixmonitor.so ; Record cal... 阅读全帖 |
|
r*****8
发帖数: 2697 | 25 下面是modules, 有可能是我的Asterisk版本有问题
[modules]
autoload=yes
load => format_pcm.so ; uLaw/ALaw
load => codec_ulaw.so ; mu-Law
load => format_g726.so ; Raw G.726
load => codec_g726.so ; g-726
load => format_gsm.so ; Raw gsm
load => codec_gsm.so ; gsm Coder/Decoder
load => app_dial.so ; Dialing
load => app_macro.so ; Extension Macros
load => app_playback.so ; Sound File Playback
;load => app_mixmonitor.so ; Record cal... 阅读全帖 |
|
d********g
发帖数: 10550 | 26 实测感觉和之前的差不多啊？
这是之前用的，求高手比较：
[modules]
autoload=no
load => format_pcm.so ; uLaw/ALaw
load => codec_ulaw.so ; mu-Law
load => format_g726.so ; Raw G.726
load => codec_g726.so ; g-726
load => format_gsm.so ; Raw gsm
load => codec_gsm.so ; gsm Coder/Decoder
load => app_dial.so ; Dialing
load => app_macro.so ; Extension Macros
load => app_playback.so ; Sound File Playback
load => app_mixmonitor.so ; Record calls
loa... 阅读全帖 |
|
r***o
发帖数: 1526 | 27 更新一下，原来的module 不全，caller id有问题
[modules]
autoload=no
load => format_pcm.so ; uLaw/ALaw
load => codec_ulaw.so ; mu-Law
load => format_g726.so ; Raw G.726
load => codec_g726.so ; g-726
load => format_gsm.so ; Raw gsm
load => codec_gsm.so ; gsm Coder/Decoder
load => app_dial.so ; Dialing
load => app_macro.so ; Extension Macros
load => app_playback.so ; Sound File Playback
load => app_mixmonitor.so ... 阅读全帖 |
|
r*****8
发帖数: 2697 | 28 谢谢!
不过在我的神座上还缺一个module: app_senddtmf.so
还有你的res_rtp_asterisk名字不全, 应该是res_rtp_asterisk.so
下面是我的更新:
[modules]
autoload=no
load => format_pcm.so ; uLaw/ALaw
load => codec_ulaw.so ; mu-Law
load => format_g726.so ; Raw G.726
load => codec_g726.so ; g-726
load => format_gsm.so ; Raw gsm
load => codec_gsm.so ; gsm Coder/Decoder
load => app_dial.so ; Dialing
load => app_macro.so ; Extension Macros
load => app_playback.so ... 阅读全帖 |
|
w*j
发帖数: 336 | 29 google voice 的配置里，只选中了google talk
打出没问题，应该是加载成功了吧？用module show命令，出来36个module，有一个叫
chan_gtalk.so：
res_adsi ADSI Resource
res_jabber.so AJI - Asterisk Jabber Interface
format_pcm.so Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G.
codec_ulaw.so mu-Law Coder/Decoder
format_g726.so Raw G.726 (16/24/32/40kbps) data
codec_g726.so ITU G.726-32... 阅读全帖 |
|
w*****w
发帖数: 28 | 30 来自主题: _BibleStudy版 - 天佑中华 Jesus hates sin, but he also showed compassion to the sinners. He called for
the lambs only after showing the love on them.
The world is going to perish because of the sin, that's right, but this is
NOT the moment to say, Hey guy, Repent, or you'll die!
Think about this, if you were one of them in the quake, what were you really
needing? A word of Gospel persuading repenting? the prayer for their
situation seeking any help, or just a bottle of pure water?
If he/she just came over from the disa |
|
