T********r
发帖数: 6210 | 1 boot into single user mode:
ok boot -s
login as root, in /etc search for *.hme0 or *.le0, rename it to
*.hme0.org or *.le0.org.
check /etc/vfstab, if there's NFS entries, comment them out. |
|
e*****n
发帖数: 4 | 2 On solairs 8 configured a virture hme0:1(eg 10.10.1.111)
On the firewall rules was set only allow ip from 10.10.1.111 to go through.
The destionation need to reach for example is 192.10.10.111(out side firewall)
The question is how to set up a route table on the Solairs box to reach the
destionation( 192.10.10.111) through the virture ethernet interface
hme0:1(10.10.1.111)?
Tried use "route add XXXXXXX" to add the to route table, but "tracceroute" to
the destionation shows that still using the h |
|
h**h
发帖数: 132 | 3 network,
/etc/hosts (ip address), if multiple interfaces, modify host.hme0 etc
/etc/defaultrouter (gateway)
/etc/resolv.conf (DNS)
/etc/nsswitch.conf (if DNS not configured before)
/etc/domainname (if domainname needs to be explicitly specified)
/etc/netmask (if any changes)
the rest should be easy after you have access to network |
|
m*****e
发帖数: 4193 | 4
No, it's /etc/hostname.interfacename. Such as /etc/hostname.hme0.
And if you have a hostname, put in
/etc/nodename |
|
f*******e
发帖数: 4 | 5 我是一个菜菜鸟，请各位大哥大姐帮帮忙：
在一个局域网内，一台是sun工作站，装的是solaris，其余电脑都是pc，装的是window
s操作系统，其中pc的一台机子是作为主机的，这台机子的局域网ip地址是192.168.0.1
，连着internet，其余机子都是通过这台电脑上internet的。
在sun工作站上我设置了/etc/hostname.hme0的内容为：
floodwave
设置了/etc/hosts的内容为：
127.0.0.1 localhost
192.168.0.198 floodwave loghost
子网掩码为255.255.255.0
在局域网内ping 192.168.0.1是可以的，但如果ping 61.135.132.175就ping不通了，得
到如下错误信息：
ICMP Net Unreachable from gateway floodwave(192.168.0.198) for icmp from flo
odwave (192.168.0.198) to 61.135.132.175
是不是因为我网关没有设好？如果是，应该在 |
|
F**********e
发帖数: 2135 | 6 想在一台sparc(sun ultra 2，没有cdrom, floppy，现在装了solairs
8)上用网络装solaris 10。这台服务器以前名叫aaa，ip x.x.x.1，后来买了新机器就直
接关机扔仓库，新机器占了aaa的名字和ip。现在一开机，刚刚test
memory完毕就报告machine with hard address aa:bb:....:ff trying to use our ip
x.x.x.1云云，然后就死循环一直报告下去，根本没有到给shell的地方。在dhcp和dns
server改了mac address对应的ip也不管用。估计用的是static ip。如果拔了网线呢，在
刚才那一步就一直报告SUNW,hme0: Link Down - cable problem?
然后也是死循环。按stop-a，会给扔到一个类似shell的地方，prompt是ok，但肯定不是u
nix shell.
请问一下在这种情况下我该怎么办？另外那台新机器是服务器，绝对不能断开或者改名。
给点建议，谢谢。 |
|
