发帖数: 1 | 1 我只囤了case/psu, 玻璃有层不透明的沾纸贴着, 我还未开封, riser cable我没买,
以后需要再说, 我也看到有人因为cable短路机毁卡亡。 |
|
I******n
发帖数: 5952 | 2 riser cable自己买一个，没多少钱。这个箱子关键要有定制线。 |
|
y***e
发帖数: 383 | 3 不好意思写错啦，应该是X5670。其实直接买CPU自己换就好。我搞了两台T7500一共$
150，额外买了一个2nd CPU riser $78，四块X5670 $112，96GB内存 $115，两块128G
SSD $50，两块2T HDD $68，两个64G U盘装系统$40。所以一共是$613，哦，我另外把
机器里面的V8800给卖了回血，-$80，所以每台机器大概$270。 |
|
c********l
发帖数: 125 | 4 你这就是瞎挖，单个显卡没有什么收益的。
你随便网上搜搜mining rig，至少6张显卡起，用pci riser cable 连起来。
挖eth用claymore软件，然后连到pool挖，我用的nanopool
或者你用nicehash也可以
超频电压都要调试，youtube上搜mining rig有得是教程。
现在挖收益越来越低了，因为全网算力在疯狂涨。一个rig6张卡之前一个月能挖0.8个
，后来变成0.6,现在0.4 电费大约60$/月，卡得钱早赚回来了，现在再买卡进来不知多
久能回本
一张gtx1070卡的hashrate 大约是28~30 Mh/s
Time: |
|
S*****e
发帖数: 6676 | 5 有什么特殊用途非得加第二块显卡？上PCIe riser |
|
|
s*****t
发帖数: 1994 | 7 Eclipse in the Mist
Credit & Copyright: Olivier Meeckers (Groupe Astronomie de Spa)
Explanation: The Sun and Moon rose together over much of Europe on the morning of May
31st with the first solar eclipse of 2003 already in progress. And while sightings of the full
annular phase of the eclipse were restricted to far northern regions, early morning risers were
still treated to inspiring views of two celestial bodies which are most important to life on
planet Earth. Following the dawn's spe |
|
U*********r
发帖数: 5610 | 8 是反了。我是做上游的，在休士顿，上游的工作应该基本上都在这里了：
Flow assurance
Pipeline/riser
Subsea system
Drilling
Geology
Topsides
etc.
下游的工作这里也很多，设计炼油厂一个大项目都要上几十上百号Process Engineer. |
|
l*w
发帖数: 646 | 9 Well, I am not sure how do you define upstream.
To me, upstream is from reservoir all the way to the receiving platform,
refinary and ect.
How much do you think petropysics, geology and fluid through porous media
will do for outflow in wellbore, flowline and riser? And subsea processing
uints?
Once the fluid is out of the reservoir into the wellbore, most or all the
workwill be done by chemical and mechanical engineers.
Reservoir engineerning is part of the upstream, but not all.
For a chemical |
|
g********d
发帖数: 4174 | 10 LZ说他是GERD。
这是google来的：
Question: What Causes GERD?
Answer: Gastroesophageal Reflux Disease (GERD) is caused by reflux of
stomach acid into the esophagus. In most sufferers this is due to a
relaxation of the lower esophageal sphincter (LES) that opens to allow food
and liquids to pass into the stomach, and closes to prevent food and stomach
acid from flowing back into the esophagus.
不管什么原因，把床头垫高是几乎没有副作用的治疗，至少值得一试。其他方法都有副
作用，何况LZ已经知道效果不好。
我在target买了一套bed risers。自己用了两个，另外两个给了朋友，他多年的胃酸反
流的毛病也好了。 |
|
m*y
发帖数: 421 | 11 Tracyfood说的基本靠谱，John87的看法有他合理的一面，但有些情绪化。John87所指
的可能是做topsite或化工厂之类的土木，技术上与onshore土木没有本质区别，忙的时
候需要很多人，没活的时候大批量的裁，比喻09年经济不景气的时候。Tracyfood指的
可能是那些已经脱离了传统土木的，象hull structure, riser或geomechanics等，的
确与机械力学或海洋等做的没区别。
两人各有所指，说的都是对的。本人土木出身，业界虚混几年，无意冒犯二位。 |
|
t*******d
发帖数: 1186 | 12 可以问一下7年经验做riser的博士年薪多少啊？建个参照系。
做IT当然好，very flexible,以后想当小老板也有个途径，可有人偏偏热爱土木这个专
业怎么办？我就是给大家提供一个思路，谈不上指点迷津。
lg要我给大家举个励志典型 - 谢国忠。好好学土木，以后做什么都行，土木这行当牛
人辈出的 （Martin Yan 甄能煮，William Hung, 不要打我啊！）
我劝 |
|
s********r
发帖数: 565 | 13 platform, pipeline, riser, tank...etc. 这些其实都可以做啊。。。直接归为钢结
构。。。 |
|
s*******y
发帖数: 946 | 14 首先声明，自己感慨一下，没有任何打击别的最近找到工作的朋友想法。
公司在Houston, 做offshore steel structure, 2个月前招了2个土木专业的博士，都
是同济，交大本科背景的，起薪都是8万多啊--公司中国人多，重视本科背景。据说我
们公司给的就是普通的市场行情。 去年夏天招的两个，做riser的，起薪也都是8万多。
想当初我phd毕业的时候，做building的，才5万多。 工作4年多的时候，才勉强拿到8
万，真是人和人没法比啊. |
|
a****i
发帖数: 239 | 15 Please send me your CV ASAP if you are interested in reviewing the
following article. Please specify which one you would be interested in
reviewing. Official review invitation letter from the conference will be
sent to you soon once you have been selected. Thank you!
Title:
1. An Anti-Recoil Control Design Using the New Riser Hybrid Tensioning
System in Deepwater Drilling
2. Observation of Incident Managed Ice Conditions and Correlation to Vessel
Loading for Dynamic Positioning in Ice
Conference... 阅读全帖 |
|
a****i
发帖数: 239 | 16 Please send me your CV ASAP if you are interested in reviewing the
following article. Please specify which one you would be interested in
reviewing. Official review invitation letter from the conference will be
sent to you soon once you have been selected. Thank you!
Title:
1. An Anti-Recoil Control Design Using the New Riser Hybrid Tensioning
System in Deepwater Drilling
2. Observation of Incident Managed Ice Conditions and Correlation to Vessel
Loading for Dynamic Positioning in Ice
Conference... 阅读全帖 |
|
m*********k
发帖数: 10521 | 17 [EB23] kongzi Feb 3 ● Service request很管用
成功扣除 330 伪币的用户: kongzi
成功奖励 10 伪币的用户: aacute, Riser, foreinter, caren, beixin, shopper2,
kitchenaid, portage, cutegirls, urwufen, pingan222, ninewan, zhisuoyi,
kaylaxu, fatmingzhou, damp, yoyo0220, bellamm, BamHI, NBDL, huaying, Uglypig
, Proman, heilongjiang, rocnex, yanxi, aulaa, jntl, chahu, xR |
|
m*********k
发帖数: 10521 | 18 "[EB23]
Niu2009 Mar 14 ● 求祝福，希望绿卡早绿 发100个包子"
扣除版面:(EB23)1000伪币成功
成功扣除 100 伪币的用户: Niu2009
成功奖励 10 伪币的用户: Dasanyuan, ardorbird, aulaa, kaplan, yiyuan, busby,
zyyz789, benren1, charleybei, Riser, OrangeApple, Utahman, mxyou21, liehuo,
fatmingzhou, wedelia33, sinobama, heilongjiang, Grefighter, darkangel, mydg,
zqq, cyyxx76, casrbara, eNurse, gj2009, qm1, aliwangyue, Belichick, panpa,
ERICYH, a18, latexcat, charccus, ShipFast, happykitty, eDoctor, wbwb,
foolyou, poise, holly973, save12345, Dov... 阅读全帖 |
|
A********2
发帖数: 111 | 19 ID: Archer2012
Location: Toronto, ON, Canada
Bow: Recurve bow
- Riser: W&W Inno CXT
- Limbs: W&W Inno EX Prime 42lbs
- Sight: Shibuya Ultima RC 520 Carbon
Arrow: Easton X10 410 30inch
Actuall draw weight: 47lbs |
|
A********2
发帖数: 111 | 20 ID: Archer2012
Location: Toronto, ON, Canada
Bow: Recurve bow
- Riser: W&W Inno CXT
- Limbs: W&W Inno EX Prime 42lbs
- Sight: Shibuya Ultima RC 520 Carbon
Arrow: Easton X10 410 30inch
Actuall draw weight: 47lbs |
|
T**r
发帖数: 7016 | 21 我的grouping不太稳定。
今天仔细反省有些什么会影响精度，
一、可能是箭台，目前用的是三牙箭台。发现牙刷和fletching还是有一点点摩擦，于
是把三牙箭台修剪了一下，确保牙刷不会擦到fletching。
二、检查了自己的form，左手推着riser，手指完全放松，应该没有问题，但我发现了
右手的巨大问题。我的右手抓trigger stem太紧，这样在释放的时候对弓弦产生了一个
侧力，可能损失的精度就在这里。
无奈太晚，没法测试。明天去BPS range试试。 |
|
T**r
发帖数: 7016 | 22 暂时安心了，过不了两天又会琢磨啥东西，
其实我已经在琢磨了，左手撑住riser的时候，还没有完全无扭力，想一个啥器械，在
手掌和handle之间，完全去除扭力，
生命在于折腾， |
|
T**r
发帖数: 7016 | 23 看到了，很标准啊，但看不到靶子，只听到一声上靶的声音。
我有一个问题，看你好像没有用rest，这样是不是箭尾会扫着riser，会不会影响精度
？怎么样解决这个问题呢？ |
|
c*******r
发帖数: 253 | 24 好消息是似乎prostyle polaris和sage这三个弓的limp都是通用的，当然sage的高磅
limp最好不要用到其他两个riser上，但总体可以互换~
玩法很多啊~ |
|
|
h*****8
发帖数: 1896 | 26 要金属riser除了射准竞技反曲的 就跟我一样上野牛吧 如果你对鹰眼感冒的话
hoyt buffalo |
|
T**r
发帖数: 7016 | 27 第一看是不是水平，你的瞄上有没有水平仪？
第二，做一个paper tuning，最好做一个bare shaft，看看箭是不是出去就偏了，这个
目的是为了通过调整箭台找到true center shot避免nock left/right。
如果true center shot太偏导致箭尾擦到riser，还得调整cam yoke，我就是整了这么
一大圈。
总之，箭台、nock point、cam yoke、cable timing、sight、都要考虑，能不动yoke
最好。 |
|
d*****o
发帖数: 863 | 28 选择hard模式打算选recurve。有人建议选贵一点的riser，其他部分可以便宜一点。对
于这些完全不懂，才知道是需要分开买的。
如果选购的话有比较主流的网站吗？ |
|
m******r
发帖数: 1097 | 29 搭车问问中级进阶的组合有什么推荐呢？
记得在哪儿看到说riser可以上来就买好的，多好算好呢？需要考虑哪些因素？顶配还
是挺烧钱的啊。
rest+
xt |
|
d*****o
发帖数: 863 | 30 选择hard模式打算选recurve。有人建议选贵一点的riser，其他部分可以便宜一点。对
于这些完全不懂，才知道是需要分开买的。
如果选购的话有比较主流的网站吗？ |
|
m******r
发帖数: 1097 | 31 搭车问问中级进阶的组合有什么推荐呢？
记得在哪儿看到说riser可以上来就买好的，多好算好呢？需要考虑哪些因素？顶配还
是挺烧钱的啊。
rest+
xt |
|
s*****i
发帖数: 14 | 32 老大， 好帖！
麻烦看一下以下问题：
1》
¼” Oak plywood: $19/ (4’x8’). &
frac34;”
oak plywood: $45/ (4’x8’).
这两种木头啥意思？有何区别？夫人frac34 啥意思？有无链接？
2》你说“从上倒下”，但这个说是从下向上，http://www.youtube.com/watch?v=FYiiAnui_hI
你能否评论一下
3》我想把riser刷成白色，你老评论一下？ |
|
s*****i
发帖数: 14 | 33 老大， 好帖！
麻烦看一下以下问题：
1》
¼” Oak plywood: $19/ (4’x8’). &
frac34;”
oak plywood: $45/ (4’x8’).
这两种木头啥意思？有何区别？夫人frac34 啥意思？有无链接？
2》你说“从上倒下”，但这个说是从下向上，http://www.youtube.com/watch?v=FYiiAnui_hI
你能否评论一下
3》我想把riser刷成白色，你老评论一下？ |
|
f*****f
发帖数: 371 | 34 还没做，学习中。房子没到手。
这个bbs没办法图文混排啊。又不能上传PDF.大家先将就看。又要的，我给你们PDF文件。
Step 1: Cut the Treads
Each tread will need to be slightly different in size. Measure each
tread
and cut it to size then install it using 2-1/4" trim screws.
Step 2: Install the Treads
Start at the bottom and work your way up the steps so that you can add
extra
screws into treads from the back of the riser above it. Space the holes
on
the treads evenly since the wood filler will be visible after the steps
are
finished.
Step 3: Brace the |
|
|
w*******y
发帖数: 60932 | 36 Performance Bikes has their 2010 Access XCL 9.9 29er mountain bike on sale
to Team Performance members for $1799 - 25% with coupon code 747 + $30
shipping = $1379.99. The Team Performance membership is $29.99 - 25% coupon
= $22.49 but with that you get an additional 10% off your next purchase,
just remember to cancel before your year is up or the annual membership will
auto-renew. The 25% is actually good on anything but this bike is a
particularly good deal with the installed components. Even i... 阅读全帖 |
|
w*******y
发帖数: 60932 | 37 Euroflex Monster EZ1 Blue Floor Steamer (Refurbished)
Today: $34.99
Compare at: $114.88
You Save: $79.89 (70%)
Use 10% Coupon in your email
DOES ANYONE HAVE THIS ITEM? CAN YOU GIVE OPINION?
Free Shipping.
Mop with front steam jets cleans right up to the edge of the room
Steam cleaner is ideal for vertical corners, stair risers and kitchen
baseboards
Floor care device also useful for pre-treating stains
Compact structure and curved reclining handle is handy and efficient
Can easily reach into dif... 阅读全帖 |
|
|
|
w*******y
发帖数: 60932 | 40 Not the most powerful system around, but we have been looking for a couple
of workstations, and need Windows 7 Pro.
Not a bad price at all at $170, and it will meet our needs.
Tech Specs
o Processor: AMD Athlon 64 X2 Dual-core 2.3GHz processor
o Memory: 2048MB DDR2 Memory
o Hard drive: 80GB
o Optical drive: DVD+/-RW Drive
o Operating system: Microsoft Windows 7 Professional (32-bit) Pre-
installed
o Video card: Integrated NVIDIA Quadro NVS 210S graphics
o Sound card: Inte... 阅读全帖 |
|
w*******y
发帖数: 60932 | 41 CDNN has the Heckler and Koch SL8-6 on sale for $1399. Usual price for this
rifle is somewhere around the 2k mark.
They are also throwing in a 20rd mag, scope mount and riser for free.
Picatinny Rail Mount
Weighs 9.2 lbs
Short stroke piston design
Cold hammer forged barrel
CALL 800-588-9500 TO ORDER
|
|
t********r
发帖数: 4908 | 42 ☆─────────────────────────────────────☆
brooks (橙蓝) 于 (Tue Mar 2 09:52:45 2010, 美东) 提到:
昨天又受刺激了, 对门的小男孩和咱儿子一般大, 上同一家学校, 人家美国父母还没有
花啥心思推儿子, 到现在学校要求读的100本书好不容易读了50本, 咱儿子100本书都读
完了.
昨天小男孩来我家玩, Andy刚读完一本叫"Grandpa Toad's secret"的书, 是和我一起
读的,
中间我帮忙不少. 小男孩自己很顺利就读完了, 我还问人家"What does this book
talk about?" 小男孩立马就绘声绘色地开始review了, 语言组织能力之强, 和美国人
做presentation 一样, 1,2,3, 转折衔接很自然,三言两语就把故事给review完了, 又
生动又简练还突出了重点.
再瞧瞧自家儿子,无论是用中文还是用英文, 都是啃吃啃吃, 里面无数个然后或者and
then,
又臭又长, 人物背景通通模糊, 听得人稀里糊涂. 这差的可不是一点半点啊.
你说人天生... 阅读全帖 |
|
Z***e
发帖数: 3693 | 43 把家里的 Carpet Staircase 换成了 Hardwood 的。
订做的 Prefinished Treads 和 Riser。本想图快，找了个 Contractor 来安装，结果
毁了一半 Treads 上的漆面，这个 Contractor 只好重新 Sand，重新 Stain，结果也
没省时间，反而弄得很不方便。有几级楼梯没 Stain 好，我老只好自己再 Sand 和
Stain。还不如当初自己做呢。于是呢，楼梯栏杆，就都自己做了。楼梯扶手还是用的
以前的，栏杆和柱子都换新的了。 |
|
s*****t
发帖数: 1994 | 44 Eclipse in the Mist
Credit & Copyright: Olivier Meeckers (Groupe Astronomie de Spa)
Explanation: The Sun and Moon rose together over much of Europe on the morning of May
31st with the first solar eclipse of 2003 already in progress. And while sightings of the full
annular phase of the eclipse were restricted to far northern regions, early morning risers were
still treated to inspiring views of two celestial bodies which are most important to life on
planet Earth. Following the dawn's spe |
|
