T*********3
发帖数: 7 | 1 换机油的时候，修车店推荐让我修这个，一开始说tensioner这个磨损的比较厉害，后
来问他能开多久，他说一两个星期，我现在开了一个月，还好好的，这个该修吗？大概
要花210$. 价格好像不能再降了，大家这个要尽快地修吗，还是可以拖着等坏了再说？
谢谢。
Ford Taurus 2003 SES, Duratec 3.0L V6 DOHC 24V |
|
t******1
发帖数: 334 | 2 不是吧。我正准备换tensioner，光零件就要200刀。还不说人工。皮带没算。
这价格也太便宜了，果断换。
另外，我是加速的时候会有刺刺声，刹车的时候好像倒还好。 |
|
w*********r
发帖数: 2095 | 3 不同的车很不一样的。空间大的我可以2分钟搞定。空间小的，需要卸一大堆东西才能
access.
我觉得连tensioner一起换这个价格挺合理的。人家修车的也得吃饭。
of
removal
. |
|
|
a******o
发帖数: 16625 | 5 tensioner 你到ebay上找零件40块。 |
|
J*****a
发帖数: 4262 | 6 一般的就换这么几个吧？
• Water pump
• A/C, alternator, power steering & timing belt
tensioner好像不一定要换，dealer坑我呢？ |
|
p******d
发帖数: 3737 | 7 小事小事。我爸妈也抱宝宝，我特别心疼他们，觉得他们太辛苦了。其实不是大问题，
主要不是一家人，在一个屋檐下生活就会有tension。要是你爸妈抱孩子，你就会感受
不一样的。其实有人帮忙带孩子，对你和孩子真的是福气啊。 |
|
c**i
发帖数: 6973 | 8 【 以下文字转载自 ChinaNews 讨论区 】
发信人: choi (choi), 信区: ChinaNews
标 题: Taiwan Strait tension cools off
发信站: BBS 未名空间站 (Thu Apr 17 13:05:33 2008)
That is the titel of a report today in Washington Times. WQritten by Mr >
Bill Gertz.
A quote:
"The United States sent three aircraft carrier strike groups to waters
around Taiwan after China told U.S. officials last year there was high risk
of a military incident after Taiwan's March 22 presidential election,
according to Pentagon and military officials.
"The |
|
G*****m
发帖数: 5395 | 9 Wed, May 5, 2010 -- 10:00 AM
Tensions Between Asians and African-Americans
A recent spate of incidents between Asians and African-Americans in the Bay
Area has focused attention on relationships between the two groups. We
discuss how perception of 'the other' plays out in the community, and how
both are trying to move forward. |
|
s*******i
发帖数: 108 | 10 一直在用yonex nanospeed 9000， 为什么总觉得杀球很没力， 回球也很难打得又高又远。我试了别
的rsl 的attack 拍子就好很多。 个人技术水平中下，我在想也许需要重新拉线。 大家有什么建议吗？ 这个拍子需要多少
tension? 女生用。
谢谢先！ |
|
W*********n
发帖数: 4624 | 11 NS9000是个很好的拍子，应该杀球很给力的（基于我以前用的经验）。
我觉得杀球力量和姿势是关键。另外业余女生打高tension不一定好吧：速度、力量都
不够会觉得打不动的。22～24lb应该足够了。
又远。我试了别
大家有什么建议吗？ 这个拍子需要多少 |
|
r********t
发帖数: 41 | 12 Is there anybody knows where to buy a tension calibrator for stringing
machine? Thanks |
|
s********k
发帖数: 21 | 13 电子秤怎么测tension阿
那种）在Ebay上卖10刀左右，价格便宜又精确，非常好用。 |
|
r********t
发帖数: 41 | 14 Is there anybody knows where to buy a tension calibrator for stringing
machine? Thanks |
|
s**a
发帖数: 1995 | 15 前两天后胎瘪了，不会上fixed gear的后轮，只好拿到店里去修。出来后骑了十分钟，
又漏气了。估计是店里的师傅上内胎的时候夹在外胎和钢圈之间了。不得已，又得拿回
去。
原来试过上了一次后轮，没搞好，链条不直。各位怎么上后轮的？用不用chain
tensioner? |
|
w******x
发帖数: 4396 | 16 ft, what's so hard about taking a wheel off and putting it back on? a chain
tensioner is not necessary but will make it easier. |
|
s**a
发帖数: 1995 | 17 I bought a Surly Tuggnut Chain Tensioner. But there is no instruction/manual
in my shipment.
I tried youtube/google without too much luck
Can someone share the knowledge?
Thanks |
|
t***w
发帖数: 165 | 18 1) played a round at Ibrostar Paraiso Maya on Wednesday and found this set
to be dead accurate.
I am wondering is it bcause I am more relax while on vacation of is it
really the club ?
2) I usually have problem with shoulder tension on my reglar weekend round,
after a week sitting in front of the damn computer. Massage can be
expensive and don;t work sometimes, especially for Sat morning round. Does
anyone have similar problem ?
Any solution ? |
|
v***s
发帖数: 4031 | 19 You'll be in a better position to tell if the clubs fit your swing or not
after playing two more rounds with the clubes. As for the shoulder tension,
I really don't know. I know I always have narrow swing arcs and hit the ball
shorter when playing the first few holes if I don't warm up before a round.
round,
Does |
|
c****1
发帖数: 5654 | 20 if i like say tension 60, should i string as as 62 so that after a while
it becomes 60, perfect for me?
how long does it take to drop from 62 to 60 usually? |
|
R*****d
发帖数: 615 | 21 先从你常用的tension减一到两磅开始吧，刚开始又换牌又换磅数很难适应的。 |
|
f*****l
发帖数: 1703 | 22 发现换了之后好像比原来比较松，就是说用手指掰似乎容易，原来的很难扣动。
这个是因为缠的时候tension调低了，还是string本身的原因，我这次换了一种线，没
有常见的synthetic gut. |
|
a****n
发帖数: 4734 | 23 有很多因素，原来很难扣动，可能是因为线磨损，互相咬住沟槽，也会这样，并不完全
是tension的关系。 |
|
|
K****D
发帖数: 30533 | 25 第3次打tension没觉得和第二次有多少区别。希望是个好现象！
目前估计从55 lbs 跌至 53 lbs. |
|
h*******s
发帖数: 8454 | 26 tennis warehouse有个string database，里面有各种string得多次测试数据
包括tension loss，你可以去查查，也可以告诉我你的线，我帮你查，呵呵
估计你要十穿线55的话，现在恐怕在40以内 |
|
K****D
发帖数: 30533 | 27 SPPP 17g (1.25). 据说tension stability口碑不错。 |
|
b*e
发帖数: 3845 | 28 What poly are you testing with 49 lb?
Last time I strung SPPP at 57lb. When I use a Gamma String Tester to measure
, it reads 45. Power is a little too low outdoors.
Couple days ago, I stung another racquet using SPPP at 52lb. Gamma String
Tester reads 44. I haven't played with it yet.
It seems that I can even go lower with SPPP because it maintains tension so
well.
(some counter-example like Luxilon, Gamma string tester would measure 38
after just one match) |
|
K****D
发帖数: 30533 | 29 SPPP has very good tension durability. I remember it only drops about
19 lbs after 10 minutes of hitting. Strings like Cyberflash drops
about 26 lbs.
measure
so |
|
w******n
发帖数: 13172 | 30 我也有一个string tester，但我记得string tester只能测tesion的相对值，即%drop
，不能准确读出实际磅数。
我用的是MSV Focus Hex 17L.非常好的tension maintenance。另外偶打室内
measure
so |
|
f*********0
发帖数: 886 | 31 器材派， 这些都是浮云。 啥线哈，拍子啊， tension都是浮云， 改变不了NTRP0.5 |
|
f*********0
发帖数: 886 | 32 不过话说回来， 既然有穿线机， 反正两个礼拜穿一次线，
combination 无穷多，
tension 横 +1 +2 +3 +4 +5， -1, -2, -3, -4, -5,
竖线 +1，+2， +3， +4 +5，-1 -2 -3 -4 -5，
就可以有无限个蜜月了。哈哈
器材派就是这样乐此不疲。
所以说wellmoon现在是器材派一点也不过。 |
|
h*******s
发帖数: 8454 | 33 能用luxilon的就慢慢挑呗
从40到60进行二分查找
别人没法说啊，跟拍子啊什么的都有关
其实我觉得tension是个人喜好，我手感迟钝什么磅数都感觉不出来，一样打
自己穿的话一般syn gut穿55－62，poly 54－58
Power |
|
a***8
发帖数: 2433 | 34 Strung my LM Radical MP with:
Main: Luxilon Ace 18 @ 37lbf
Cross: Head Syn Gut 17 @ 50lbf
After played 2 times, about 3hrs total, here's the measurement:
Main: 37lbf
Cross: 25lbf
Measured by a tension gauge from Wellmoon
Surprising, isn't it? |
|
j**c
发帖数: 234 | 35 如果50lbf vs 25lbf都是测数值就surprising了，因为Syn Gut应该tension loss少。 |
|
|
b*e
发帖数: 3845 | 37 我很久以前就推荐过Gamma String Tester。检查String Job和Tension Loss非常有效
，只是它测出的刻度是相对值。 |
|
b*e
发帖数: 3845 | 38 when it was fresh, based on my experience, it's usually around 40-42 units for (50-53
lbs poly Main). Cross is usually 25-30 units (for 55-50 lbs cross). For poly with
average tension stability, it will drop to 37-38 units after the first 1-2 hour
hitting. |
|
a***8
发帖数: 2433 | 39 One update:
I cut off the syn. gut cross and put on a new cross with the same string.
Here's the fresh off the machine measurement:
Old Luxilon Ace 18 main: 48 lbs (was 37 lbs before restrung cross)
New Head Syn. Gut 17 cross: 35 lbs
The tension I set on the machine for the cross: 55 lbs |
|
b*e
发帖数: 3845 | 40 yup, i got the same measurement for all the racquets that I string. It's
very normal. There is abosolutely nothing wrong with it. Again the measurement is just relative measurement, so do not treat it as lbs. The actual tension in cross is much lower because the friction resistance from mains. |
|
a***8
发帖数: 2433 | 41 I can understand the cross is low. What supervised me is so much higher the
main went. I thought it should be close to the cross...
measurement is just relative measurement, so do not treat it as lbs. The
actual tension in cross is much lower because the friction resistance from
mains. |
|
d****t
发帖数: 1284 | 42 tension really is just for reference only, if it feels good if you string at
72lbs on that particular machine, then just keep doing it.
my machine is very loose too, i have to string mine at 69lbs, which probably
equal to 55lbs or lower from a pro shop machine. |
|
t*********r
发帖数: 630 | 43 thx for quick response. but want to get more specific. So drop weight
stringers do need tension adjustment? The scale on it should mean sth
afterall.
BTW, you have very nice ground strokes. Very relax and with power. |
|
t*********r
发帖数: 630 | 44 Do you use drop weight stringer to string? How to avoid the string tension
loss of the human factor?
I was thinking about the string (syn guy). it is kind of stretchy. Do you
wait for the weight to get to the level for several second or you
immediately clamp it.
Any other DIY stringers have the same concerns? |
|
t*********r
发帖数: 630 | 45 That is my concern. My string tension is not right |
|
M***x
发帖数: 288 | 46 Have u heard about an app on iphone(ipad) called RacquetTune? It is really
accurate.
I strung my racket at 55lbs, the app shows the tension is 54.8lbs. |
|
a**s
发帖数: 9606 | 47 how an iphone app test string tension? by sound? |
|
t*********r
发帖数: 630 | 48 Yes. I bought it and found my tension is way off. But not sure which is more
close to truth. |
|
M***x
发帖数: 288 | 49 It can only measure the fullbed tension.
You cannot separate the main and cross.
Like last time I strung my main/cross at 56/52, the app shows 55lbs. |
|
a*****0
发帖数: 6788 | 50 Someone posted a video showing him stringing a racket on a Gamma X-2. Take
a look at how he pulls with the tension arm and gripping wheel to keep the
arm level. It's not a problem if the arm is at a slight angle. Someone did
a calculation a while back that some slight angle has very minimal impact
on the pulling strength.
I still think the issue is with the clamps, particularly because you said it
's a few years old. Where you clamp also makes a difference. Clamp right
next to the frame ins... 阅读全帖 |
|
