g*****n
发帖数: 357 | 1 Literature review 2: Two cycles of review process. Read thick to thin, and
then thin to thick |
|
|
g*********r
发帖数: 9822 | 3 啊呸
不thick road啊不thick road |
|
B*******e
发帖数: 3882 | 4 http://news.cnet.com/8301-13579_3-57447957-37/leaked-spec-label
"Putting it in nearly the same league as the MacBook Air, the new 15-inch
model is described in the image as being 0.74 inches thick and weighing 4.7
pounds (the current model is 0.95 inches thick and weighs 5.6 pounds).
In addition to four USB 3.0 ports, it would also feature a 2560x1600 high-
resolution Retina display that up until now have only been available on
Apple's iPhones and iPads. NPD DisplaySearch Senior Analyst Richard ... 阅读全帖 |
|
w********1
发帖数: 3492 | 5 Mon, 11 Jun 2012 13:37:59 PDT
With Apple's new "Next Generation MacBook Pro" being the headliner in terms
of new hardware introduction at WWDC, there is obviously considerable
interest in how the new model compares with the previous design, which
continues to be offered in both 13-inch and 15-inch sizes.
Engadget posts a brief hands-on with the new MacBook Pro fresh out of the
box, showing how much slimmer the new form factor is than the standard
MacBook Pro.
It's 0.71-inches thick, or roughly 2... 阅读全帖 |
|
w********1
发帖数: 3492 | 6 Thu, 14 Jun 2012 21:12:39 PDT
Four days before the 15-inch Retina MacBook Pro was introduced, KGI
Securities analyst Ming-Chi Kuo released a report claiming that Apple would
launch the machine alongside the then-current MacBook Pro line rather than
as a direct replacement.
Kuo's report turned out to be nearly exactly on point, as was the case with
his April report claiming that Apple would discontinue the 17-inch MacBook
Pro, and so it pays to revisit his Retina MacBook line claims to see what
t... 阅读全帖 |
|
w********1
发帖数: 3492 | 7 Wed, 20 Jun 2012 07:33:33 PDT
It's been a busy week of Apple teardowns for iFixit, with the firm
announcing today that it has completed its work on the non-Retina version of
the Mid-2012 MacBook Pro.
Given that the non-Retina version has retained the same form factor for a
number of years, there are few changes to the internal layout of the
components, but a fresh look inside now that the redesigned Retina MacBook
Pro has been released offers some interesting comparisons of how Apple is
working ... 阅读全帖 |
|
w********1
发帖数: 3492 | 8 Tue, 03 Jul 2012 12:55:32 PDT
Topeka Capital Markets analyst Brian White today issued a new research note
highlighting a steep drop in sales at Wintek, Apple's long-time supply chain
partner involved in production of display touch panels for iOS devices.
According to the report, Wintek has experienced one of its steepest declines
in shipments on record, but rather than suggesting that the decline is due
to overall weakness in Apple products, White believes that it is evidence of
Apple moving to... 阅读全帖 |
|
l*m
发帖数: 824 | 9 925 : 1/3 inch 8M sensor; ip6+ use 1/4 inch 8M sensor. (sensor sensitivity
is different, so the low light performance is different)
925 thickness: 8.5mm, ip6+ thickness: 7.1mm.
this is a typical camera industrial design trade-off. Apple is dominated by
Industrial Design engineer. If they keep this thinner camera with smaller
pixel sensor, they can never win the low light performance to bigger pixel
sensor. |
|
h****6
发帖数: 229 | 10 windows 8?
At the moment, Microsoft Surface is hot
CENTURY CITY, Calif.--As of this weekend, Microsoft has a hot product on its
hands.
Reviews notwithstanding (some have been pretty negative), on Friday my local
Microsoft store in Century City (in Los Angeles) was buzzing with curious
customers keen on trying the Surface RT tablet, as lines snaked outside.
Other stores drew crowds too.
(And all three Surface models are back-ordered three weeks on Microsoft's
online store.)
I was surprised to see... 阅读全帖 |
|
d******a
发帖数: 32122 | 11 居然种族攻击起中国人来了
一个波兰人，一个女的不知道哪个种族，明明是种族主义者，还此地无银三百两地“
don’t get me wrong i’m not racist or anything but the more i interact
with chinese people ”
https://techtablets.com/forum/topic/dont-buy-the-tempered-glass-screen-
protector/
Flubski
Participant
Posts: 56
Hey Guys,
yesterday I attached my ordered tempered glass on my Cube. After that I
wanted to put it in the keyboard dock,
but now I noticed that the tablet now is too thick to fit the keyboard dock.
WHAT THE FUCK is this you chinese retards?... 阅读全帖 |
|
j**n
发帖数: 551 | 12 Goodbug, thanks a lot!
can you please give more detail information.
what is difference between thick client and web client?
I assume that thick client is a Java desktop application, which can be built
on swing components.
I am concerned about the web application, in a typical MVC application, for
example, using Struts framework, what is the best tool to build the user
interface layer?
In my company, the front end is built using DOJO toolkit(0.4.2 version),
this version is old and performance is |
|
B*******e
发帖数: 3882 | 13 first, check to make sure the new hard drive can be safely installed, since
the old HD is 12.5 mm thick, while the new one is 9.5 mm thick.
with ur current hardware, u can try Norton Ghost 2003 Enterprise Editioin, w
hich SHOULD BE(although I have not actually tried it yet) able to clone ur o
ld lappy HD through network to a clone file on ur destop, after installed th
e new HD. It seems u can clonecd back by booting up with a ghost floppy.
or buy ThinkPad Second HDD Adapter for Ultrabay 2000,ins |
|
s*****t
发帖数: 1994 | 14 Saturn from Below
Credit: CICLOPS, JPL, ESA, NASA
Explanation: Swooping below Saturn, the Cassini spacecraft spied several
strange wonders. Visible in the distance are some of the many complex rings
that orbit the Solar System's second largest planet. In the foreground looms
the gigantic world itself, covered with white dots that are clouds high in
Saturn's thick atmosphere. Saturn's atmosphere is so thick that only clouds
are visible. At the very South Pole of Saturn lies a huge vortex that is |
|
b*******e
发帖数: 288 | 15 是啊，TEM做起来时间刷刷刷就没有了……
不知道你切thin section之前有没有先切thick section确认一下？
我没有做过神经的，但是我觉得应该都一样吧，你用thick section在光学显微镜下确
认你切的位置对了，再切薄片用TEM，可以节省时间 |
|
|
g*****n
发帖数: 250 | 17 I am 外行人， too. Let me try to convince you.
How did they pick NTCP? They incubated cells with a high concentration (200
nM) of viral protein baits, photo-cross-linked, and immunoprecipitated the
protein complexes. They saw a thick band at 60 kDa. They ran another gel and
cut the band at that position and did MS. NTCP showed up. They believed
that that was the one.
Here are the problems. (1) With a high concentration of baits and cross-
linking, you would pull down a lot of proteins. They admitted... 阅读全帖 |
|
b****r
发帖数: 17995 | 18 楼主镇静！
虽然有两个两个softmarker，但做过array正常，有问题的几率已经极低了。特别是心
内回声,只听过和染色体异常有关，没查到这个和Noonan syndrome有关
Nuchal fold thickness的增加，一般认为都是和心脏发育异常造成的体液循环异常有
关，Noonan sydnrome与Nuchal fold thickness有关，很大程度上也是因为Noonan
sydnrome常见心脏畸形。你们已经做过心脏B超，没有看到心脏畸形，有Noonan
sydnrome的可能性也是非常非常低的。 |
|
q****i
发帖数: 6923 | 19 62991-888 - VWR TUBING RD5/16X1/16INPK50FT
Supplier: VWR International
VWR* Red Rubber Tubing^ High-quality, durable, natural rubber tubing for
general laboratory use. Seamless, with uniform medium wall and low sulfur
content. Durometer hardness: Shore A, 50. Tensile strength: 2500-3500psi.
Coil length: 15.2m. 7.9IDx11ODmm. Wall thickness: 1.6mm
Cole-Parmer
Black Rubber Tubing
EW-96142-07
Black Rubber Tubing, 5/16" ID x 7/16" OD, 25 ft, wall thickness 1/16"
(package)
chlorinated.
查到２个vendor一... 阅读全帖 |
|
x*******i
发帖数: 32 | 20 You are using a home-made Raman instrument right? For confocal Raman
instruments from major vendors, you do not need to consider how to measure
the distance of the focus movement, because it is controlled by stage with
spatial resolution of 100 nm (normal type) or 10 nm (advanced type).
I need some time to think about how to answer your question. But confocal
Raman experiment may not be able to determine the thickness by the technique
itself on the well-known sample, because the refractive index... 阅读全帖 |
|
p****e
发帖数: 40 | 21 最好有身份和背景吻合，职位要求如下，请私信联系， 谢谢。
Your role:
• Work in Thick Film R&D Team. Focus on thick film product
development and scale up for LED related applications.
• Operate FAB and materials testing tools for product development and
application support activities in the assigned areas.
• Conduct characterization of new materials and optimization of new
formulations to further improve performance of the products targeted.
• Summarize test results in adequate technical reports and ... 阅读全帖 |
|
W******r
发帖数: 789 | 22 By Mark A Ament
If you only make one improvement to your diet this year, I hope it is to
replace refined sugar with raw food sweeteners. If you do, I can guarantee
you that smoother digestion, more relaxed muscles, more peaceful emotions
and increased mental clarity are soon to follow.
Before looking at the negative health consequences of eating refined sugar,
let's have a quick look at how it's made. This will give you some insight
into why it affects the body the way it does. The majority of s... 阅读全帖 |
|
a****r
发帖数: 89 | 23 There is no min thickness requirement for PT slab. ACI exclusive chapter 13
in Prestressed design
And span to thickness is on commentary in chapter 18, not in code provision
★ 发自iPhone App: ChineseWeb 8.1 |
|
v***o
发帖数: 51 | 24 不谢，不谢，共同探讨吗。
原来如此。你这么一说让我又想到3点：
1. delayed evaluation: 我用的那个righ-quota是让maple delay evaluation（刚想
到这茬）。其实不用typeset命令也可以实现你的要求的，我估计你就是这么搞的。
maple里的evaluation rule是个很有意思的东西（我最上面给出的purdue的链接里有一
章讲这）。想想要结合symbolic和numerical的计算和推演，就知道这套东西背后的思
想了。不过我觉得learning curve挺陡的，也知道熟用这个好处无穷。
2. 变化格式：我一般原始图出来后，再对各个obeject用不同的font,color和
thickness等格式来分化他们的表现，就会避免你的最初的疏忽了（这对于eps输出也很
有用）。更实际的用处是，有时候图像的细微差异（很多时候细微的东西并不细微的；
））可以用这些办法放大凸现出来。比如，函数在某个区间等于零，和你的情况一样和
坐标重合的，换个大点的thickness就看得出了。这背后的知识和经验又是水深无比，
俺也没精力深挖了。总的来 |
|
g*********n
发帖数: 808 | 25 GaAs vs. Si from wikipedia
Comparison with silicon
GaAs advantages
Some electronic properties of gallium arsenide are superior to those of
silicon. It has a higher saturated electron velocity and higher electron
mobility, allowing gallium arsenide transistors to function at frequencies
in excess of 250 GHz. Unlike silicon junctions, GaAs devices are relatively
insensitive to heat owing to their wider bandgap. Also, GaAs devices tend to
have less noise than silicon devices, especially at high fre... 阅读全帖 |
|
b********d
发帖数: 720 | 26 I think MEMS is promising
If internet of things is going to be popular, sensor devices like gyroscope
are going to be hot.
If 3D IC is the future, experts of interposer, packaging are needed.
The thick photoresist experience in MEMS is also vital in PCB industry.
And the shadow mask in OLED deposition popular in Asian needs thick
photoresist expertise. |
|
b********d
发帖数: 720 | 27 I think MEMS is promising
If internet of things is going to be popular, sensor devices like gyroscope
are going to be hot.
If 3D IC is the future, experts of interposer, packaging are needed.
The thick photoresist experience in MEMS is also vital in PCB industry.
And the shadow mask in OLED deposition popular in Asian needs thick
photoresist expertise. |
|
|
c*s
发帖数: 2145 | 29 【 以下文字转载自 Chemistry 讨论区,原文如下 】
发信人: boss (养蜂人@城市), 信区: Chemistry
标 题: Re: 请问如何测量沉积膜的厚度？
发信站: The unknown SPACE (Fri Mar 28 19:59:30 2003) WWW-POST
发信人: charlespan (火柴天堂), 信区: Macromolecules
标 题: Re: thinkness measurement of film
发信站: The unknown SPACE (Tue Apr 2 15:07:57 2002), 转信
There are several ways to measure the thickness.
Mass method only works for thickness larger than microns.
Ellispometry is the most popular method measure from 1 micron
down to few nonometers as in the case of SAM |
|
U******n
发帖数: 75 | 30 i doubt SEM can see nanostructuer
what is the film thickness and the substrate?
film migration may be one of the reason if u using any high energy surfaces
and your film is less than 10nm thick. btw, what is the Mw you using?
check the Tg of your film. thin film may have much lower Tg than bulk |
|
a***u
发帖数: 9 | 31 If your Si wafer has a thick oxide layer on the top, the broad peak might be
due to the oxide. You can measure the oxide thickness with ellipsometry.
Si wafer is single crystalline. When you rotate the wafer, you will probe
translational symmetry along different directions. For polycrystalline sample
with isotropic orientation, you will see the same diffraction pattern when
rotating the sample. I think it will be more helpful to ask these questions to
people from materials science major. |
|
c*****e
发帖数: 238 | 32 Thickness is definitely an important factor, as well as the surface properties
and the interaction between polymers and air.
It is a very difficult question to answer about the impact of film thickness.
The impacts are two fold, equilibrium or thermodynamic, as well as dynamic or
kinetic reasons.
It is way too complicated to elucidate the whole thing, but I believe the
equilibrium structure must be macroscopic. Nonetheless I tend to regard the
system as an effective 2D system if the phase separa |
|
f*****j
发帖数: 1 | 33 You may pour your solution in a Teflon plate and allow the solution to dry
very slowly. You should calculate what thickness is needed and
correspondingly what what concentration. Anyway, be sure to use Teflon plate
and it allows you to peel the film easily and to get uniform thickness
relatively. Good luck. |
|
p****e
发帖数: 40 | 34 最好有身份和背景吻合，职位要求如下，请私信联系， 谢谢。
Your role:
• Work in Thick Film R&D Team. Focus on thick film product
development and scale up for LED related applications.
• Operate FAB and materials testing tools for product development and
application support activities in the assigned areas.
• Conduct characterization of new materials and optimization of new
formulations to further improve performance of the products targeted.
• Summarize test results in adequate technical reports and ... 阅读全帖 |
|
l**o
发帖数: 1240 | 35 if the thickness is small such as (<5mm)
you could assume that the stress and temperature is even over the thickness
then you could simplify this to a 2-D problem |
|
k*******n
发帖数: 190 | 36 When engine is running, the film thickness between the contact surfaces is
mainly determined by the speed, the viscosity.If the film thickness is too
thin, then there will be wear problem in that contact area(in bearings,
pistons etc) So the viscosity is the main effector in the Elastohydrodynamic
Lubrication. |
|
k*******n
发帖数: 190 | 37 When engine is running, the film thickness between the contact surfaces is
mainly determined by the speed, the viscosity.If the film thickness is too
thin, then there will be wear problem in that contact area(in bearings,
pistons etc) So the viscosity is the main effector in the Elastohydrodynamic
Lubrication. |
|
t*******i
发帖数: 315 | 38 I bought a light blue shirt from Brooks brothers and I felt it was very
thick. Good quality though. The thick shirt makes me sweat more during
interviews. |
|
s*******r
发帖数: 174 | 39 as an intern, i found the big thick book did not work efficiently for me,
just because i have no time.on the ICU on-call day we can easily cover 18
patiens with one senior and one intern. then there is no cap for the transfer
and admissions. if i want to read something quickly, the small pocked book
i mentioned has everything covered. the only drawback is it doesn't explain
why.I would read the big thick book too during my senior year, that is when
we have much much more time to read, not during |
|
m******e
发帖数: 432 | 40 在Adv. Mater. 2006, 18, 1202–1205是这样描述的 a hot melt of an ionomer film
(Bynel 4702, 35 lm thick, DuPont)
在Nature materials 2005, 4, 455是这样描述的platinized FTO counter electrodes
separated by 40-μm-thick hot-melt spacers (Bynel, Dupont).
还有很多文献中都用这样的spacer. 我打电话给Dupont, 他们说文章弄错了，这些
films根本不存在。有订购这样spacer的同学吗？能告诉我怎样才能买到？谢谢！ |
|
f***h
发帖数: 55 | 41 【 以下文字转载自 Physics 讨论区 】
发信人: fifth (小护士), 信区: Physics
标 题: One more paper review chance
发信站: BBS 未名空间站 (Fri Mar 4 21:57:48 2011, 美东)
There is one more paper from Modern Physics Letters B. If you are familiar
with this field and interested in it, please let me know with your
information.
j****[email protected]
==========================
Title: PHONON-DRAG EFFECT OF NANO-SCALE FeSi2 FILMS AND THERMOELECTRIC
APPLICATION
Abstract: Phonon-drag effect usually occurs in single crystals at very low
temper... 阅读全帖 |
|
N*******3
发帖数: 625 | 42 Check cross-section of the glass under SEM (if it is very thin, less than
100 micro) or optical microscope (if it is thicker than 100 micro). You can
easily see the thickness of the coating. Check multi points before you make
any conclusion of the thickness.
Good luck! |
|
b*m
发帖数: 124 | 43 【 以下文字转载自 Olympics 讨论区 】
发信人: simpleton (傻逸), 信区: Olympics
标 题: Re: 水深越深，依照物理學原理浮力也就越大
发信站: BBS 未名空间站 (Thu Aug 14 15:54:35 2008)
对于牛顿流体，shear stress = viscosity * shear rate
shear rate = velocity / thickness of fluid
水越深(thickness of fluid)，在速度(velocity)不变的情况下剪切速率(shear rate)
越小，而粘度(viscosity)恒定，剪切力(shear stress)自然就会减小。水受到的剪切
力减小，人受到的反作用力自然也小。
原来2米的泳池现在变成3米，剪切力为原来的2/3。对于平衡态的平板剪切，理论上是
这样。 |
|
