t******e 发帖数: 2009 | 1 【 以下文字转载自 PDA 讨论区 】
发信人: theodore (陀螺), 信区: PDA
标 题: 在G1上装froyo-----长,复杂,绝对慎入
发信站: BBS 未名空间站 (Wed Dec 29 04:28:36 2010, 美东)
应朋友的要求写了个攻略,好辛苦,版主给个包子吧。
所有的攻略都是来自于xda,我只是做了搜索和整理,翻译和写了解释性的语言和自己
的感受。
我自己按照这个攻略刷机成功了。
1. downgrade OS
要装froyo,必须要有root的权限,要变成root,必须要寻找有安全漏洞的版本,一般来
说,RC30
以上的版本都把已知漏洞给补上了,所以第一步一般是downgrad到RC29的版本。
步骤如下:
1.1 Format your phone's SD card to FAT32 mode
1.2 Download and unzip the RC29 image file. Copy the DREAIMG.nbh file
to the SD card root.
http://www.megaupload.com/?d=EMY1HI... 阅读全帖 |
|
f*u 发帖数: 5576 | 2 I have installed P02 again, then tried 1.4.1, now I am getting "Erase yaffs2
image region error" |
|
T****n 发帖数: 6187 | 3 from google:
* Are you disconnecting everything except the USB disk, AC and HDMI
cables when running the update?
* Is it FAT32 (let me know if you don't know how to check)?
* Are there just two files in the root of the USB disk?
* Which archive are you downloading?
* Have you tried defaulting the settings before running the update?
* Have you tried it using a different USB disk?
yaffs2 |
|
j**********n 发帖数: 527 | 4 我的bootcode是18,firmware是P02,最后刷1.4.1成功了。但是有一两次失败的经历供
你参考。
第一次装用了一个1G的USB (FAT32),只有install.img和remotekey 两个文件。进度条
走第二遍的时候出现了“not enough space to write yaffs”的错误。然后硬关机重启
,又开始安装,这次出现的是 reboot 的错误信息。
然后我换了一个U盘 (FAT32),同时发现我还有网线连着,把网线拔了。只有电源,H
DMI和U盘连着。硬关机重启开始安装成功了。
我觉得网线连着可能是最大的问题,当然之前的U盘也有可能有问题。
yaffs2 |
|
J********3 发帖数: 3151 | 5 试了一下,erase yaffs2 image region error,然后就停哪儿了,又刷回P61了。 |
|
|
p***A 发帖数: 607 | 7 same here...
changed from BC 23 to BC 18, still error, 1st time no space, second time,
region error.
well, I could stay on P61 R2, I was able to watch the movies from haoims no
issue. |
|
a*****o 发帖数: 5 | 8 try to clear the corrupted firmware image before flashing with this:
erase -m |
|
T****n 发帖数: 6187 | 9 en, this is the way to go |
|
h****g 发帖数: 772 | 10 问题是这个1.4.2通用固件比那个haoims要好很多吗?还是差不多的源?
我觉得现在的问题是源组织的真乱
而且也许因为我们在国外,很多都看不了 |
|
l****i 发帖数: 3339 | 11 传说中的1.4.2有迅雷看看
我的是bc 26的 现在在用haoims
不知道有没有可能性刷1.4.2的通用固件 |
|
|