m***i 发帖数: 133 | 1 周末想换掉spark plug,3个很顺利些来换成新的了。可是就是有一个下不下来,把我使
用的Extension Bar都扭的twist了,听人说可以用神魔松动螺丝的试剂,请问是神魔?
可以直接碰到spark plug里吗?不会造成打不着火把?谢谢 |
h******u 发帖数: 389 | 2 how come you could twist your Extension bar? It is solid steel. |
M***s 发帖数: 8769 | 3 我也不信
可以倒点汽油进去润滑一下试试
【在 h******u 的大作中提到】 : how come you could twist your Extension bar? It is solid steel.
|
a**n 发帖数: 56 | |
M***s 发帖数: 8769 | |
m***i 发帖数: 133 | 6 我也不知道,刚开始没有板动,就加了一个套管在wrench的把上,就觉得动了,以为是
spark松动了,就有转了一圈,然后才发现是Extension Bar都扭的twist,大概有90度
,可能是Extension Bar的质量不好,总之是spark没有任何的松动。 |
x*****b 发帖数: 271 | 7 Apply pb blaster, let it sit for a day, then try again. Just use a regular
ratchet that was designed for spark plugs. Don't use those long breaker bars
which could snap the ceramic part of your park plug, which would put you in
real trouble.
If this doesn't work, take your car to a mechanic and see if he/she could
deal with this. If not, then you better give it up and sell you car. |
m***i 发帖数: 133 | 8 is WD40 working for this? or pb blaster is better? |