m****a
发帖数: 2593 | 1 https://thegarage.jalopnik.com/bmw-engines-are-gigantic-pieces-of-shit-
1784684330
BMW Engines Are Gigantic Pieces Of Shit
"The likelihood of an average German car making it 10 years without several
unplanned roadside mishaps approaches the same probability of you waking up
tomorrow as Katy Perry." |
m****a
发帖数: 2593 | 2 "Let’s take, for example, my old E36 M3. It featured a US-only spec 3.2
liter straight six cylinder engine that produced around 240 horsepower. It
also had a unique problem in which the nut that held the sprocket driving
the oil pump would fall off. Yes, the one thing that made sure your engine
was oiled properly would simply fall apart, because it wasn’t torqued down
properly from the factory. " |
m****a
发帖数: 2593 | 3 If you move to more late model stuff, the situation gets a bit more dire.
Let’s take the E46 M3, for example. It featured a 333-horsepower naturally
aspirated inline six cylinder engine that was more unreliable than an AA
meeting sponsored by Miller Lite. These engines were were plagued with
connecting rod bearing failures, issues with the variable cam timing (VANOS)
, crankcase ventilation failures, hard starting, and their cooling systems
were made of plastic and sealed, ensuring catastrophic failure where
scalding hot coolant would shoot out of your engine bay, overheating your
engine, at which point your head gasket would blow. |
m****a
发帖数: 2593 | 4 The same goes for every M-branded car that BMW has made in the last decade,
and these problems are well-documented. The E60 M5's V10 will chew through
its rod bearings in less than 60,000 miles and has rampant and costly SMG
pump failures. The E92 M3 will also devour its rod bearings in short order.
The new M3 and M4 engines have crank hub failures that take the engine out
of sync and smash the valves into the pistons. They also suffer from oil
cooler issues, in which overheating is a valid concern, especially if you’
re the kind of person that drives your car like the PR reps claim you can
around a track. |
m****a
发帖数: 2593 | |
l*******g
发帖数: 27064 | 6 丰田一身烂铁皮，不生锈才是奇迹
bmw上用塑料配件太多，不过现在丰田也跟进了，丰田的水泵也是塑料叶轮了
别说99年的了
2012年的tacoma都已经锈烂了
04年的
10年新
2008年的lx570 在2015年的时候
2013 rx 350 在2016年初
2013 年的lx 570在2016年8月已经锈成这个吊样了
【在 m****a 的大作中提到】
: 丰田容易生锈看来也是真的。
: http://thegarage.jalopnik.com/i-was-not-prepared-for-how-insanely-rusty-my-
: lexus-sc40-1791973365
: 99年的Lexus-sc400 subframe 锈成这个鸟样
|
