s*****l
发帖数: 22 | 1 想自己买一套Shimano套件，组装一辆公路车，难度有多大？ |
l*******o
发帖数: 669 | 2 Very easy with the right tools, but not cost effective.
【在 s*****l 的大作中提到】
: 想自己买一套Shimano套件，组装一辆公路车，难度有多大？
|
c*******r
发帖数: 13580 | 3 depends
【在 s*****l 的大作中提到】
: 想自己买一套Shimano套件，组装一辆公路车，难度有多大？
|
m****h
发帖数: 1672 | 4 想起当年装电脑的日子。
看了一下零件，似乎可行，
ULTEGRA 全套 870
FUJI SST 1.0 碳架 1625
其它部件 大约 200-500
加上工具人工，好像比整车还贵 |
w***n
发帖数: 9040 | |
c*******r
发帖数: 13580 | 6 well, it depends on what tools you need. I assume you already have a set of
basic tools like allen wrenches and hex wrenches. on top of that, you need a
BB wrench depending on what BB you get. if you have an integrated set, it's
mostly tool free and super easy. other than that, not much else. oh, maybe
a cable cutter, but I assume you can get away with a pair of regular pliers
if they are sharp.
I didn't have to visit my LBS when I built my last bike. I'm hoping to stay
LBS free for this bike I'm building. I almost decided to let them do my
headset but managed to use some homemade tools.
【在 m****h 的大作中提到】
: 想起当年装电脑的日子。
: 看了一下零件，似乎可行，
: ULTEGRA 全套 870
: FUJI SST 1.0 碳架 1625
: 其它部件 大约 200-500
: 加上工具人工，好像比整车还贵
|
l*******o
发帖数: 669 | 7
of
a
's
maybe
pliers
stay
To install modern Shimano bottom bracket, a single $20 BBT-9 park tool will
be enough. You also need cassette lockring removal tool and chain whip to
install cassette. You need all these tools anyway for future maintenance. So
the money spent on these tools won't be wasted.
Headset installation tools is a different story, but you can install headset
without these specialty tools.
That's it, assuming you don't build wheels.
【在 c*******r 的大作中提到】
: well, it depends on what tools you need. I assume you already have a set of
: basic tools like allen wrenches and hex wrenches. on top of that, you need a
: BB wrench depending on what BB you get. if you have an integrated set, it's
: mostly tool free and super easy. other than that, not much else. oh, maybe
: a cable cutter, but I assume you can get away with a pair of regular pliers
: if they are sharp.
: I didn't have to visit my LBS when I built my last bike. I'm hoping to stay
: LBS free for this bike I'm building. I almost decided to let them do my
: headset but managed to use some homemade tools.
|
c*******r
发帖数: 13580 | 8 http://www.performancebike.com/bikes/ProductDisplay?storeId=100
This kit includes the BB wrench for Hollowtech II and cassette lockring tool.
For the BB, theoretically you need a torque wrench. But most people just go
by feel. I have one that I used working on cars but I don't think it's
really a big deal.
will
So
【在 l*******o 的大作中提到】
:
: of
: a
: 's
: maybe
: pliers
: stay
: To install modern Shimano bottom bracket, a single $20 BBT-9 park tool will
: be enough. You also need cassette lockring removal tool and chain whip to
: install cassette. You need all these tools anyway for future maintenance. So
|
L*******e
发帖数: 334 | 9 I assembled a mountain bike, using this set of tools, plus a few more: cable
/housing cutter, threadless nut setter, crown race setter.
tool.
go
【在 c*******r 的大作中提到】
: http://www.performancebike.com/bikes/ProductDisplay?storeId=100
: This kit includes the BB wrench for Hollowtech II and cassette lockring tool.
: For the BB, theoretically you need a torque wrench. But most people just go
: by feel. I have one that I used working on cars but I don't think it's
: really a big deal.
:
: will
: So
|
t****u
发帖数: 10218 | 10 难度不大，只要你稍微有点动手能力即可。
有两点要牢记：1，量两次，割一次。和头发一样，割短了基本上不能再接的。2，基本
上没有要用蛮力的步骤，如果很费劲的话，很可能是装错了。
我的车都是自己装的，无聊时车轮也编。
【在 s*****l 的大作中提到】
: 想自己买一套Shimano套件，组装一辆公路车，难度有多大？
|
|
|
c*******r
发帖数: 13580 | 11 You can use a PCV pipe to set a crown race. It costs $3 at home depot.
You can use a screw driver to install a star nut: http://www.youtube.com/watch?v=q7F8BnCcetk
cable
【在 L*******e 的大作中提到】
: I assembled a mountain bike, using this set of tools, plus a few more: cable
: /housing cutter, threadless nut setter, crown race setter.
:
: tool.
: go
|
c*******r
发帖数: 13580 | 12 头发能长，钢管割多了就完蛋了
装headset cup需要很大的劲，其他基本没有
【在 t****u 的大作中提到】
: 难度不大，只要你稍微有点动手能力即可。
: 有两点要牢记：1，量两次，割一次。和头发一样，割短了基本上不能再接的。2，基本
: 上没有要用蛮力的步骤，如果很费劲的话，很可能是装错了。
: 我的车都是自己装的，无聊时车轮也编。
|
t****u
发帖数: 10218 | 13 用headset Press 尽量均匀地压下去。
【在 c*******r 的大作中提到】
: 头发能长，钢管割多了就完蛋了
: 装headset cup需要很大的劲，其他基本没有
|
c*******r
发帖数: 13580 | 14 我就用了根长的bolt和一些垫圈加木头搞定的，有点费劲。木头都被压烂了。
【在 t****u 的大作中提到】
: 用headset Press 尽量均匀地压下去。
|
i*********5
发帖数: 19210 | 15 太牛了！
【在 t****u 的大作中提到】
: 难度不大，只要你稍微有点动手能力即可。
: 有两点要牢记：1，量两次，割一次。和头发一样，割短了基本上不能再接的。2，基本
: 上没有要用蛮力的步骤，如果很费劲的话，很可能是装错了。
: 我的车都是自己装的，无聊时车轮也编。
|
