p*********g
发帖数: 89 | 1 我用的Kluwer Academic Publishing的论文模板，出现了很初级的错误。
我用的是 WinEdt 5.5 and MikTex 2.6 和。我在文件里加入条目的时候，比如
\begin{itemize}
\item a
\end{itemize}
就会出现问题。Latex编译没有问题，但要是用dvi显示的话，就会出现两个错误框，第
一个
MikTek Problem Report
"Not all fonts could be loaded. See 'File->Document Properties', for details
."
我点ok 之后，就出现第二个错误框
"This is dvips(k) 5.96 Copyright 2007 Radical Eye Software (www.radicaleye.
com)
' TeX output 2007.12.15:1052' ->
| r*****f
发帖数: 247 | 2 You can change the software.
Firt uninstall your MITEX and WinEdit.
Then, go to www.ctex.org and download the full package of CTEX. Fully
install it.This package is 500M but contains every resources, no matter font
or style. Quite convenient.
You can also go the bbs.ctex.org to solve this problem, but I believe to
fully install the CTEX is good.
details
【在 p*********g 的大作中提到】
: 我用的Kluwer Academic Publishing的论文模板，出现了很初级的错误。
: 我用的是 WinEdt 5.5 and MikTex 2.6 和。我在文件里加入条目的时候，比如
: \begin{itemize}
: \item a
: \end{itemize}
: 就会出现问题。Latex编译没有问题，但要是用dvi显示的话，就会出现两个错误框，第
: 一个
: MikTek Problem Report
: "Not all fonts could be loaded. See 'File->Document Properties', for details
: ."
|
|
