I***a
发帖数: 704 | 1 有谁用过source meter的?
就是一个电压源，可以同时测量DC current
,精度高，同时可以存储。 |
B*****2
发帖数: 83 | 2 What's the problem?
【在 I***a 的大作中提到】
: 有谁用过source meter的?
: 就是一个电压源，可以同时测量DC current
: ,精度高，同时可以存储。
|
I***a
发帖数: 704 | 3 I use 2602 source meter. This model does not have USB port. The
communication with PC is by RS-232 serial port. Did anyone use it?
【在 B*****2 的大作中提到】
: What's the problem?
|
B*****2
发帖数: 83 | 4 You have two ways to communicate the Keithley 2602. Either is to use IEEE488
port through a GPIB card or to use RS-232 port directly. A computer with
support software, such as LabView, is necessary.
【在 I***a 的大作中提到】
: I use 2602 source meter. This model does not have USB port. The
: communication with PC is by RS-232 serial port. Did anyone use it?
|
I***a
发帖数: 704 | 5 Thanks.
Do you know how to export readings saved in the buffer to PC?
We do not have labview. We can install some software by Keithley.
IEEE488
【在 B*****2 的大作中提到】
: You have two ways to communicate the Keithley 2602. Either is to use IEEE488
: port through a GPIB card or to use RS-232 port directly. A computer with
: support software, such as LabView, is necessary.
|
B*****2
发帖数: 83 | 6 Read the manual. The manual will tell you how to do it. I guess it is a
simple command. You may use c/c++, Agilent VEE, or matlab to make the
communication.
【在 I***a 的大作中提到】
: Thanks.
: Do you know how to export readings saved in the buffer to PC?
: We do not have labview. We can install some software by Keithley.
:
: IEEE488
|
s*******a
发帖数: 16 | 7 It`s easy, just read the manual. By using the printbuffer command in TSP,
you can get the readout. |
I***a
发帖数: 704 | 8 Dear Sir:
Do you mean TSB(Test Script Builder)?
What is TSP?
Best regards,
【在 s*******a 的大作中提到】
: It`s easy, just read the manual. By using the printbuffer command in TSP,
: you can get the readout.
|
