f*********n
发帖数: 11154 | 1 http://coldhandarms.com/zencart/index.php?main_page=product_inf
The upper is built by Del-Ton and the lower is made by Del-Ton. It comes
with a everything you need to build an AR-15. The upper has M4 feed ramps
and M203 cuts on the barrel. It has an "F" marked front sight base. The
barrel has been magnetically particle inspected. The extractor spring has
been upgraded and has the black center insert. this includes the lower
receiver, which requires an FFL to transfer. The parts for the lower
receiver will need to be installed, but the upper comes completely installed
and has been test fired.
The barrel is 1:9 Chrome moly with M4 feed ramps. It will shoot both 5.56
and .223. The buttstock is a 6 position collapsible.
$8 Shipping per kit
Model: DTI-15
Shipping Weight: 10lbs
10 Units in Stock
Manufactured by: Del-Ton |
f*********n
发帖数: 11154 | 2 还有一套不包括lower receiver的，$469
http://coldhandarms.com/zencart/index.php?main_page=product_inf
16" M4 rifle kit comes with everything needed to complete a stripped lower
receiver. Includes fully assembled, headspaced and test fired upper receiver
, lower parts kit and buttstock. Rifle kit does not include stripped lower
Shipping is $8 per rifle kit Features Barrel - 16" M4 - Light Weight under
handguards - 1x9 Twist - Chrome Molly - 5.56mm - M4 Feed Ramps Front Sight
Base - .725 Diameter Lower Parts Kit - Semi-Auto
Add to Cart:
Shipping Weight: 10lbs
1 Units in Stock
Manufactured by: Del-Ton |
T*R
发帖数: 25894 | |
q**u
发帖数: 12289 | 4 白菜价
installed
【在 f*********n 的大作中提到】
: http://coldhandarms.com/zencart/index.php?main_page=product_inf
: The upper is built by Del-Ton and the lower is made by Del-Ton. It comes
: with a everything you need to build an AR-15. The upper has M4 feed ramps
: and M203 cuts on the barrel. It has an "F" marked front sight base. The
: barrel has been magnetically particle inspected. The extractor spring has
: been upgraded and has the black center insert. this includes the lower
: receiver, which requires an FFL to transfer. The parts for the lower
: receiver will need to be installed, but the upper comes completely installed
: and has been test fired.
: The barrel is 1:9 Chrome moly with M4 feed ramps. It will shoot both 5.56
|
r*****7
发帖数: 574 | |
H****r
发帖数: 16240 | 6 要是再加一点钱，但是换成镀铬的管子，那我就立马进一支～～～
现在不想买拧枪管的扳手，木有动力去自己折腾管子了。再说换下来的管也不好卖阿。 |
f*********n
发帖数: 11154 | 7 Del-ton的AR质量和做工不错，和其它牌子相比居中，不是最出类拔萃的，却也不是烂
货。
这套是不错的入门级别设置；买回来后用来熟悉AR15的操作，清理，拆卸，射击技巧，
烧子弹；等到打上几年，对系统很熟悉也积累了一些经验以后可以考虑再上一把更符合
你自己要求的配置。
【在 r*****7 的大作中提到】
: 请问版大 这kit质量咋样？做工呢？谢谢
|
r*****7
发帖数: 574 | 8
版大就是版大 每次回复都这么到位 非常感激！
【在 f*********n 的大作中提到】
: Del-ton的AR质量和做工不错，和其它牌子相比居中，不是最出类拔萃的，却也不是烂
: 货。
: 这套是不错的入门级别设置；买回来后用来熟悉AR15的操作，清理，拆卸，射击技巧，
: 烧子弹；等到打上几年，对系统很熟悉也积累了一些经验以后可以考虑再上一把更符合
: 你自己要求的配置。
|
T*R
发帖数: 25894 | 9 Del-ton貌似是budget AR里的不二选择，很多人说好。不过话又说回来，大家公认的真
正的烂货都是些什么牌子？ |
k**********i
发帖数: 8706 | 10 奥林匹克牌
【在 T*R 的大作中提到】
: Del-ton貌似是budget AR里的不二选择，很多人说好。不过话又说回来，大家公认的真
: 正的烂货都是些什么牌子？
|
|
|
k**********i
发帖数: 8706 | 11 还有黑索恩牌
【在 T*R 的大作中提到】
: Del-ton貌似是budget AR里的不二选择，很多人说好。不过话又说回来，大家公认的真
: 正的烂货都是些什么牌子？
|
s*********r
发帖数: 4210 | 12 good deal，心动ing.
黑索恩牌是哪个？
【在 k**********i 的大作中提到】
: 还有黑索恩牌
|
K****o
发帖数: 2183 | 13 价格真不错
installed
【在 f*********n 的大作中提到】
: http://coldhandarms.com/zencart/index.php?main_page=product_inf
: The upper is built by Del-Ton and the lower is made by Del-Ton. It comes
: with a everything you need to build an AR-15. The upper has M4 feed ramps
: and M203 cuts on the barrel. It has an "F" marked front sight base. The
: barrel has been magnetically particle inspected. The extractor spring has
: been upgraded and has the black center insert. this includes the lower
: receiver, which requires an FFL to transfer. The parts for the lower
: receiver will need to be installed, but the upper comes completely installed
: and has been test fired.
: The barrel is 1:9 Chrome moly with M4 feed ramps. It will shoot both 5.56
|
W********t
发帖数: 8514 | 14 with the way most people in this group shoot, clean, and maintain their ARs,
do we have to have 镀铬的管子?
【在 H****r 的大作中提到】
: 要是再加一点钱，但是换成镀铬的管子，那我就立马进一支～～～
: 现在不想买拧枪管的扳手，木有动力去自己折腾管子了。再说换下来的管也不好卖阿。
|
T*R
发帖数: 25894 | 15 They are supposed to last longer as well, again which doesn't really matter
either with the volume we shoot.
ARs,
【在 W********t 的大作中提到】
: with the way most people in this group shoot, clean, and maintain their ARs,
: do we have to have 镀铬的管子?
|
k**********i
发帖数: 8706 | 16 avoid "blackthorne"
【在 s*********r 的大作中提到】
: good deal，心动ing.
: 黑索恩牌是哪个？
|
H******S
发帖数: 6011 | |
j***n
发帖数: 3786 | 18 i saw a S&W AR in local store for $609... |
f****t
发帖数: 15913 | 19 chrome lined barrel is not necessary if you do not use corrosive ammo.
I suggest light weight AR15 kit from del-ton. It is lighter and as accurate
as M4 or HBAR profile carbine.
I bought a model1 sales light weight barrel from midwayusa and assembled a
carbine from it. It holds 1 MOA all the time. The gun is 5.5lbs w/o mag. The barrel
is made by E.R. Shawn. This is another good choice if you want to assemble
one.
ARs,
【在 W********t 的大作中提到】
: with the way most people in this group shoot, clean, and maintain their ARs,
: do we have to have 镀铬的管子?
|
H****r
发帖数: 16240 | 20 瓦，5.5磅！
记下了，以后要攒卡宾的话就照方抓药
accurate
The barrel
assemble
【在 f****t 的大作中提到】
: chrome lined barrel is not necessary if you do not use corrosive ammo.
: I suggest light weight AR15 kit from del-ton. It is lighter and as accurate
: as M4 or HBAR profile carbine.
: I bought a model1 sales light weight barrel from midwayusa and assembled a
: carbine from it. It holds 1 MOA all the time. The gun is 5.5lbs w/o mag. The barrel
: is made by E.R. Shawn. This is another good choice if you want to assemble
: one.
:
: ARs,
|
|
|
k**********i
发帖数: 8706 | 21 呃。。。其实我刚想说，我下一把要上的卡宾是Bretta CX4 |
H****r
发帖数: 16240 | 22 准备上9mm的？
【在 k**********i 的大作中提到】
: 呃。。。其实我刚想说，我下一把要上的卡宾是Bretta CX4
|
k**********i
发帖数: 8706 | 23 是啊，减轻重量，多带弹药
【在 H****r 的大作中提到】
: 准备上9mm的？
|
k**********i
发帖数: 8706 | 24 What other parts did you use?
Did you really measure the weight of the gun? I am asking because according to some previous research I did, light barrel and standard metal upper/lower receivers can only give you about 6.5lb weight. Some guys did make it to 5.5lb, but only with the polymer lower receiver from Cavalry Arms.
carbine from it. It holds 1 MOA all the time. The gun is 5.5lbs w/o mag.
The barrel is made by E.R. Shawn. This is another good choice if you want
to assemble one
【在 f****t 的大作中提到】
: chrome lined barrel is not necessary if you do not use corrosive ammo.
: I suggest light weight AR15 kit from del-ton. It is lighter and as accurate
: as M4 or HBAR profile carbine.
: I bought a model1 sales light weight barrel from midwayusa and assembled a
: carbine from it. It holds 1 MOA all the time. The gun is 5.5lbs w/o mag. The barrel
: is made by E.R. Shawn. This is another good choice if you want to assemble
: one.
:
: ARs,
|
f****t
发帖数: 15913 | 25 upper receiver is blemished flat top from BCM ($75).
lower is surplus arms & ammo from AIM ($59)
barrel is $145 from midwayusa.
rear sight is daniel defense A1.5 from AIM.
Whole gun is 5.5lb w/o mag.
1 MOA (5rd group) is achieved with both PMC and my hand load. I need to
develop better recipe.
according to some previous research I did, light barrel and standard metal
upper/lower receivers can only give you about 6.5lb weight. Some guys did
make it to 5.5lb, but only with the polymer lower receiver from Cavalry Arms.
.
want
【在 k**********i 的大作中提到】
: What other parts did you use?
: Did you really measure the weight of the gun? I am asking because according to some previous research I did, light barrel and standard metal upper/lower receivers can only give you about 6.5lb weight. Some guys did make it to 5.5lb, but only with the polymer lower receiver from Cavalry Arms.
:
: carbine from it. It holds 1 MOA all the time. The gun is 5.5lbs w/o mag.
: The barrel is made by E.R. Shawn. This is another good choice if you want
: to assemble one
|
l***a
发帖数: 2677 | 26 铁喵打出五发1MOA，多远距离打的？
Arms.
【在 f****t 的大作中提到】
: upper receiver is blemished flat top from BCM ($75).
: lower is surplus arms & ammo from AIM ($59)
: barrel is $145 from midwayusa.
: rear sight is daniel defense A1.5 from AIM.
: Whole gun is 5.5lb w/o mag.
: 1 MOA (5rd group) is achieved with both PMC and my hand load. I need to
: develop better recipe.
:
: according to some previous research I did, light barrel and standard metal
: upper/lower receivers can only give you about 6.5lb weight. Some guys did
|
f****t
发帖数: 15913 | 27 I used nikon prostaff to get 1 MOA at 100 yard.
With iron, I can get 4 MOA.
The barrel comes with front sigh base and barrel nut. For $145, it is a good deal. |
H******S
发帖数: 6011 | 28 这个和M4/AR15比，精度，射程，威力如何？？？？
【在 k**********i 的大作中提到】
: 呃。。。其实我刚想说，我下一把要上的卡宾是Bretta CX4
|
k**********i
发帖数: 8706 | 29 近距离，无所谓啦
你应该拿它和MP5比
【在 H******S 的大作中提到】
: 这个和M4/AR15比，精度，射程，威力如何？？？？
|
H******S
发帖数: 6011 | |
|
|
f****t
发帖数: 15913 | 31 Here is the rifle. You can see the blemishes of the upper receiver.
I planned to use an A1 upper receiver. But the barrel comes with M4 ramp.
It is difficult to find an A1 upper receiver with M4 ramp. So I ended up
with a flat top.
The rifle is 5.5 lbs without mag or sling. |
T*R
发帖数: 25894 | 32 卡宾精度比手枪还是高多了。
【在 H******S 的大作中提到】
: 近距离还是就用我的PX4好了。
|
