v****0
发帖数: 1887 | 1 不知道问题在啥地方
Walmart买的廉价螃蟹 ^_^ center point
25yd zero
开始弹着点在右下角 开始调效果很明显
弹着点只是偏右
但是这时好像超出镜子的调节极限了
调没有反应
再打几枪 不知道是ring 松了还是啥
弹着点到处乱跑了
最后很郁闷的回家了
哪位大佬解释一下哪里可能出问题呢
多谢大家回答
最后确定是 raiser 松了
rail上面加了两个 1/2 的raiser
ring固定在raiser 上
废了一些周折把raiser固定好了就zero了。
|
b*******y
发帖数: 4304 | 2 check whether all screws are tight enough
if they are, check whether your scope has enough range
if you run out of range, you might have to add some shim to your ring
【在 v****0 的大作中提到】
: 不知道问题在啥地方
:
: Walmart买的廉价螃蟹 ^_^ center point
: 25yd zero
: 开始弹着点在右下角 开始调效果很明显
: 弹着点只是偏右
: 但是这时好像超出镜子的调节极限了
: 调没有反应
: 再打几枪 不知道是ring 松了还是啥
: 弹着点到处乱跑了
|
v****0
发帖数: 1887 | 3 ^_^ 好的 回头看看
【在 b*******y 的大作中提到】
: check whether all screws are tight enough
: if they are, check whether your scope has enough range
: if you run out of range, you might have to add some shim to your ring
|
f*********r
发帖数: 234 | 4 Are you sure that the scope is rated for your gun? If it is the case, the
scope may be damaged, return it back.
It is called "wandering"
★ 发自iPhone App: ChineseWeb - 中文网站浏览器
【在 v****0 的大作中提到】
: ^_^ 好的 回头看看
|
v****0
发帖数: 1887 | 5 感觉不应该是wandering
说明书丢了 但是记得板上以前有人用过
【在 f*********r 的大作中提到】
: Are you sure that the scope is rated for your gun? If it is the case, the
: scope may be damaged, return it back.
: It is called "wandering"
:
: ★ 发自iPhone App: ChineseWeb - 中文网站浏览器
|
N*********r
发帖数: 1190 | 6 it is unlikely a scope can be damamged by the recoil of .223, even a cheap
walmart one.
more likely, the mount does not fit base(ring to picatinny rail), fit,
tightening torque, thread locker. the ring(maybe not round at all, or the
tube of the scope is not round)
【在 f*********r 的大作中提到】
: Are you sure that the scope is rated for your gun? If it is the case, the
: scope may be damaged, return it back.
: It is called "wandering"
:
: ★ 发自iPhone App: ChineseWeb - 中文网站浏览器
|
f*********r
发帖数: 234 | 7 Try to count the clicks, and dial it to the middle point, hopefully it is
sitting at optical center, shoot a few to see if you can get a tight group
to rule out the gun problem. You can buy a special rail for drooping
compensation .
The scope maybe damaged before you got it. (a return by somebody else)
★ 发自iPhone App: ChineseWeb - 中文网站浏览器
【在 v****0 的大作中提到】
: 感觉不应该是wandering
: 说明书丢了 但是记得板上以前有人用过
|
f*********r
发帖数: 234 | 8 我的镜子大概能够调3英寸@10码的地方。
★ 发自iPhone App: ChineseWeb - 中文网站浏览器
【在 v****0 的大作中提到】
: 感觉不应该是wandering
: 说明书丢了 但是记得板上以前有人用过
|
v****0
发帖数: 1887 | 9 thanks a lot,
I will check the ring first, and go to the shooting range again.
Hopefully I could zero the scope this weekend.
【在 N*********r 的大作中提到】
: it is unlikely a scope can be damamged by the recoil of .223, even a cheap
: walmart one.
: more likely, the mount does not fit base(ring to picatinny rail), fit,
: tightening torque, thread locker. the ring(maybe not round at all, or the
: tube of the scope is not round)
|
f*********r
发帖数: 234 | 10 My scope comes with lock feature, which is a very important feature since
you dont want any floating parts inside. After I got scope locked, gun
problem and hold problem will be revealed, I have seen occasional flyers.
Quite often.
【在 v****0 的大作中提到】
: thanks a lot,
: I will check the ring first, and go to the shooting range again.
: Hopefully I could zero the scope this weekend.
|
v****0
发帖数: 1887 | 11 多谢楼上回答 ^_^
最后确定是 riser 松了
rail上面加了两个 1/2 的riser
但是riser 的螺丝太软 见第一个图
都开始打滑了也还没有到该有的力矩
最后没有办法 用小锉刀挫出口子 （第二个图）
这样固定好riser 后 就zero成功了 ^_^
since
gun
flyers.
【在 f*********r 的大作中提到】
: My scope comes with lock feature, which is a very important feature since
: you dont want any floating parts inside. After I got scope locked, gun
: problem and hold problem will be revealed, I have seen occasional flyers.
: Quite often.
|
s****r
发帖数: 31686 | 12 恭喜！
【在 v****0 的大作中提到】
: 多谢楼上回答 ^_^
: 最后确定是 riser 松了
: rail上面加了两个 1/2 的riser
: 但是riser 的螺丝太软 见第一个图
: 都开始打滑了也还没有到该有的力矩
:
: 最后没有办法 用小锉刀挫出口子 （第二个图）
: 这样固定好riser 后 就zero成功了 ^_^
:
: since
|
