a**********y
发帖数: 930 | 1 现在N16里面已经看到我的Brother 2140打印机。问题是无论是直接连上的电脑，还是
无线的电脑，
都没法 add printer 这个，根本看不见。
通过TCP/IP强行安装，结果根本打印不了？
请大牛指点，谢谢！ | k****i
发帖数: 838 | 2 Custom firmware printing how-to for Windows XP
Installing printing for N16 custom firmwares.
1. Click Start, select Settings, click Printers.
2. Click Add printer.
3. Wizard Window should appear - press Next
4. Select Local printer and remove check mark at "Automatically detect ...",
press Next
5. Select "Create a new port option" and "Standard TCP/IP port" in the drop
down list, press Next
6. New wizard window will appear, press Next
7. Type your N16 address in the IP address box, press Next
8. Select Custom option on the next screen, and press Settings
9. New "Configure standard ..." window will appear, and you will need to
check the RAW option, if not already checked and change port number -
specify 9101 for LPT printer or 9100 for USB one. Once completed press OK.
Once this window is closed press Next in the Wizard window.
10. Add Standard TCP/IP Printer port finished, press Finish
11. Once you've completed port configuration Add Printer should appear and
you will need to continue with regular printer setup procedure.
http://oleg.wl500g.info/printing/ | a**********y
发帖数: 930 | 3 谢谢！
找到问题了，我没有delete原来local的printer,现在没问题了
...",
【在 k****i 的大作中提到】
: Custom firmware printing how-to for Windows XP
: Installing printing for N16 custom firmwares.
: 1. Click Start, select Settings, click Printers.
: 2. Click Add printer.
: 3. Wizard Window should appear - press Next
: 4. Select Local printer and remove check mark at "Automatically detect ...",
: press Next
: 5. Select "Create a new port option" and "Standard TCP/IP port" in the drop
: down list, press Next
: 6. New wizard window will appear, press Next
|
|
