c********l
发帖数: 8138 | 1 目前的网络设置：
一台路由器，IP地址：192.168.0.1
一台Windows Server 2008，IP地址：192.168.0.2
现在Windows Server 2008上开了一个VPN Server，子网：10.8.0.0/24
我看OpenVPN的说明上说:
Pushing the redirect-gateway option to clients will cause all IP network
traffic originating on client machines to pass through the OpenVPN server.
The server will need to be configured to deal with this traffic somehow,
such as by NATing it to the internet, or routing it through the server site'
s HTTP proxy.
On Linux, you could use a command such as this to NAT the VPN client traffic
to the internet:
iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE
我的问题是：
上面的设置是linux的设置，在Windows下，应该如何设置？ | a9
发帖数: 21638 | 2 1.配置路由和远程访问
2。装其它的路由软件。比如winroute firewall等
site'
traffic
【在 c********l 的大作中提到】
: 目前的网络设置：
: 一台路由器，IP地址：192.168.0.1
: 一台Windows Server 2008，IP地址：192.168.0.2
: 现在Windows Server 2008上开了一个VPN Server，子网：10.8.0.0/24
: 我看OpenVPN的说明上说:
: Pushing the redirect-gateway option to clients will cause all IP network
: traffic originating on client machines to pass through the OpenVPN server.
: The server will need to be configured to deal with this traffic somehow,
: such as by NATing it to the internet, or routing it through the server site'
: s HTTP proxy.
|
|
