i**e
发帖数: 6810 | 1 【 以下文字转载自 PDA 讨论区 】
发信人: idee (The Unknown Singleton), 信区: PDA
标 题: 请教个DD-WRT作printer server的问题
发信站: BBS 未名空间站 (Sun May 6 21:25:39 2012, 美东)
前几天的地沟油刷了DD-WRT，设成wireless bridge工作了，
然后Services > USB > Enable core USB, Enable Printer support，
然后在Windows里面Add printer, add local port IP_192.168.1.1
(192.168.1.1是地沟油IP)，但不能打印，说是port没有open或者没有connect。
估计地沟油没识别出printer。请问这个有啥办法可以检查吗？ |
i**e
发帖数: 6810 | 2 转到这里问问。最新update是好象Windows 7能往printer发数据，
发数据的时候printer那边也绿灯闪闪，但什么都没有打印出来，
好象数据格式不对的样子 |
e*i
发帖数: 10288 | 3 http://www.dd-wrt.com/wiki/index.php/USB_printer_sharing
if you use HP1020 or some other GDI printers, you will need
additional driver.
【在 i**e 的大作中提到】
: 【 以下文字转载自 PDA 讨论区 】
: 发信人: idee (The Unknown Singleton), 信区: PDA
: 标 题: 请教个DD-WRT作printer server的问题
: 发信站: BBS 未名空间站 (Sun May 6 21:25:39 2012, 美东)
: 前几天的地沟油刷了DD-WRT，设成wireless bridge工作了，
: 然后Services > USB > Enable core USB, Enable Printer support，
: 然后在Windows里面Add printer, add local port IP_192.168.1.1
: (192.168.1.1是地沟油IP)，但不能打印，说是port没有open或者没有connect。
: 估计地沟油没识别出printer。请问这个有啥办法可以检查吗？
|
i**e
发帖数: 6810 | 4 jffs2 上面没有空间或者是只读，怎么办？
【在 e*i 的大作中提到】
: http://www.dd-wrt.com/wiki/index.php/USB_printer_sharing
: if you use HP1020 or some other GDI printers, you will need
: additional driver.
|
e*i
发帖数: 10288 | 5 add one usb flash drive, install optware on the usb drive, p901d will be
included.
【在 i**e 的大作中提到】
: jffs2 上面没有空间或者是只读，怎么办？
|
i**e
发帖数: 6810 | 6 Thanks. 看来要继续折腾啊..
【在 e*i 的大作中提到】
: add one usb flash drive, install optware on the usb drive, p901d will be
: included.
|
i**e
发帖数: 6810 | 7 报告一下，装上了print server仍然不行，放弃了。也许不同打印机
会运气好点。过些日子有新版本ddwrt再折腾吧
【在 e*i 的大作中提到】
: add one usb flash drive, install optware on the usb drive, p901d will be
: included.
|
e*i
发帖数: 10288 | 8 if you need help, you should give more information such as printer model,
what you did, etc...
【在 i**e 的大作中提到】
: 报告一下，装上了print server仍然不行，放弃了。也许不同打印机
: 会运气好点。过些日子有新版本ddwrt再折腾吧
|
i**e
发帖数: 6810 | 9 Absolutely. Samsung ML 2510. Hopefully this makes it easier
for others to try. I think it'll work for some other printers.
1. Installed the DD-WRT (link in the second post of FatWallet
N300 page.) Set up wireless ethernet bridge, then enabled
core USB and USB printer support.
Create the TCP/IP port to 192.168.1.1, install the driver on
Windows 7. At this point, when printing, the printer's data
LEG flashes and the printer initializes but prints nothing.
2. After that, I tried installing the print drive (after enabling
jffs and all that good stuff.) The symptom is the same (after
verifying that the print server is running with ps.)
【在 e*i 的大作中提到】
: if you need help, you should give more information such as printer model,
: what you did, etc...
|
e*i
发帖数: 10288 | 10 are you sure your belkin router is still 192.168.1.1 ?
ml-2510 is not that fancy and it doesn't needs additional drivers, unlike my
HP 1020.
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=458092
One guy used the same printer as yours.
【在 i**e 的大作中提到】
: Absolutely. Samsung ML 2510. Hopefully this makes it easier
: for others to try. I think it'll work for some other printers.
: 1. Installed the DD-WRT (link in the second post of FatWallet
: N300 page.) Set up wireless ethernet bridge, then enabled
: core USB and USB printer support.
: Create the TCP/IP port to 192.168.1.1, install the driver on
: Windows 7. At this point, when printing, the printer's data
: LEG flashes and the printer initializes but prints nothing.
: 2. After that, I tried installing the print drive (after enabling
: jffs and all that good stuff.) The symptom is the same (after
|
|
|
i**e
发帖数: 6810 | 11 Yeah, I know 192.168.1.1 is there - that's where the web
interface runs and that's where I ssh into :-)
It's good to know that someone had success with ML 2510.
I had the same download problem using ipkg (maybe that's
why it's not working) so I downloaded an .ipkg file instead.
The download problem could be the same /etc/resolv.conf issue.
So I'll give it another try.
BTW a correction - I didn't install any printer drivers.
The print server is all I manually installed. Do I need
any drivers?
Also, I need to mount /mnt/jffs as /jffs. How to do this
automatically after each reboot? It seems to have lost it.
my
【在 e*i 的大作中提到】
: are you sure your belkin router is still 192.168.1.1 ?
: ml-2510 is not that fancy and it doesn't needs additional drivers, unlike my
: HP 1020.
: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=458092
: One guy used the same printer as yours.
|
i**e
发帖数: 6810 | 12 Sad. Tried everything in that thread. Printer starts
(comes out from idle) when I print but nothing is printed
out :-(
【在 e*i 的大作中提到】
: http://www.dd-wrt.com/wiki/index.php/USB_printer_sharing
: if you use HP1020 or some other GDI printers, you will need
: additional driver.
|
i**e
发帖数: 6810 | 13 I tried the command below. It initializes the printer but
doesn't print anything.
cat myfile > /dev/usb/lp0
I enabled syslog. Syslog shows that the print server
is getting data but still, it doesn't print anything :-(
May 8 09:58:40 DD-WRT lpr.notice p9100d[1728]: Connection from 192.168.1.66
port 61593 accepted
May 8 09:58:40 DD-WRT lpr.notice p9100d[1728]: Finished job: 3888 bytes
received |
h*w
发帖数: 1182 | 14 tomato用ml2510没有任何问题
插上就可以用
【在 i**e 的大作中提到】
: Sad. Tried everything in that thread. Printer starts
: (comes out from idle) when I print but nothing is printed
: out :-(
|
i**e
发帖数: 6810 | 15 Tomato 上Wireless ethernet bridge 弄不出来 :(
【在 h*w 的大作中提到】
: tomato用ml2510没有任何问题
: 插上就可以用
|
h*w
发帖数: 1182 | 16 不是tomato的wireless里面有这个选项吗
我没有设过但是既然有选项应该设置不太难吧
【在 i**e 的大作中提到】
: Tomato 上Wireless ethernet bridge 弄不出来 :(
|
i**e
发帖数: 6810 | 17 有那个设置，但是连不上。网上不少人说两个router都要刷成
tomato才容易连，我另外一边的不能刷，所以 no luck了
【在 h*w 的大作中提到】
: 不是tomato的wireless里面有这个选项吗
: 我没有设过但是既然有选项应该设置不太难吧
|
