s*****n
发帖数: 513 | 1 【 以下文字转载自 Hardware 讨论区 】
发信人: slinson (slinson), 信区: Hardware
标 题: POGOPLUG安装squeeze出错
发信站: BBS 未名空间站 (Tue Jul 28 08:39:56 2015, 美东)
U盘已经格式化成以下两个分区：
Disk /dev/sda: 4004 MB, 4004511744 bytes
246 heads, 16 sectors/track, 1987 cylinders
Units = cylinders of 3936 * 512 = 2015232 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 509 1001704 83 Linux
/dev/sda2 510 1987 2908704 82 Linux swap
然后按照http://projects.doozan.com/debian/的步骤安装debian，
报错说：
# Starting debootstrap installation
E: unrecognized or invalid option --no-check-gpg
debootstrap failed.
See /tmp/debian/debootstrap/debootstrap.log for more information.
完整record如下
Pogoplug:~$ cd /tmp
Connecting to projects.doozan.com (50.116.34.13:80)
Pogoplug:/tmp$ chmod +x dockstar.debian-squeeze.sh
Pogoplug:/tmp$ export PATH=$PATH:/usr/sbin:/sbin
Pogoplug:/tmp$ ./dockstar.debian-squeeze.sh
!!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!!
This script will replace the bootloader on /dev/mtd0.
If you lose power while the bootloader is being flashed,
your device could be left in an unusable state.
This script will configure your Dockstar to boot Debian Squeeze
from a USB device. Before running this script, you should have
used fdisk to create the following partitions:
/dev/sda1 (Linux ext2, at least 400MB)
/dev/sda2 (Linux swap, recommended 256MB)
This script will DESTROY ALL EXISTING DATA on /dev/sda1
Please double check that the device on /dev/sda1 is the correct device.
By typing ok, you agree to assume all liabilities and risks
associated with running this installer.
If everything looks good, type 'ok' to continue: ok
Installing Bootloader
# checking for /usr/sbin/nandwrite...
# checking for /usr/sbin/nanddump...
# checking for /usr/sbin/flash_erase...
# checking for /usr/sbin/fw_printenv...
# checking for /etc/fw_env.config...
# Validating existing uBoot...
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00080000...
Connecting to jeff.doozan.com (50.116.34.13:80)
valid-uboot.md5 100% |****************************| 1133 --:--:-- ETA
## Valid uBoot detected: [pinkpogo davygravy-2012-02-20-current]
## The newest uBoot is already installed on mtd0.
# uBoot installation has completed successfully.
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
62720 inodes, 250426 blocks
12521 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=260046848
8 block groups
32768 blocks per group, 32768 fragments per group
7840 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 34 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Setting up swapspace version 1, size = -1316458496 bytes
# Starting debootstrap installation
E: unrecognized or invalid option --no-check-gpg
debootstrap failed.
See /tmp/debian/debootstrap/debootstrap.log for more information. | N**********d
发帖数: 9292 | 2 debootstrap版本太老了，换新版本
【在 s*****n 的大作中提到】
: 【 以下文字转载自 Hardware 讨论区 】
: 发信人: slinson (slinson), 信区: Hardware
: 标 题: POGOPLUG安装squeeze出错
: 发信站: BBS 未名空间站 (Tue Jul 28 08:39:56 2015, 美东)
: U盘已经格式化成以下两个分区：
: Disk /dev/sda: 4004 MB, 4004511744 bytes
: 246 heads, 16 sectors/track, 1987 cylinders
: Units = cylinders of 3936 * 512 = 2015232 bytes
: Device Boot Start End Blocks Id System
: /dev/sda1 * 1 509 1001704 83 Linux
|
|
