R**R 发帖数: 3318 | 1 看样子还得搬着来,俱乐部太安静。
看到有人要在水泥地上装地板,我就想要不要讨论一下,什么样的地板好?
Floating 还是 glue down?
优缺点各是什么? |
N****w 发帖数: 21578 | 2 floating 的吧。。。水泥地不可能完全平坦的
总要弄个木条垫起来一点才好
【在 R**R 的大作中提到】 : 看样子还得搬着来,俱乐部太安静。 : 看到有人要在水泥地上装地板,我就想要不要讨论一下,什么样的地板好? : Floating 还是 glue down? : 优缺点各是什么?
|
R**R 发帖数: 3318 | 3 一般floating的好象也不弄木条垫,只是下面放个pad.
而且foating的也比glue down 的好做。
【在 N****w 的大作中提到】 : floating 的吧。。。水泥地不可能完全平坦的 : 总要弄个木条垫起来一点才好
|
K******S 发帖数: 10109 | 4 个人喜欢FLOATING,自己和帮别人装了7,8间了,太适合DIY了,GLUE DOWN的干得时候新手
能弄得巨MESSY,虽然全是ENGINEER的,不过还是觉得FLOATING的下面放个垫子对防潮稍
微好些.而且GLUE DOWN的万一有热胀冷缩怎么办呢?
【在 R**R 的大作中提到】 : 看样子还得搬着来,俱乐部太安静。 : 看到有人要在水泥地上装地板,我就想要不要讨论一下,什么样的地板好? : Floating 还是 glue down? : 优缺点各是什么?
|
K**********r 发帖数: 2640 | 5 支持。可不可以些个详细过程?等弄完了浴室,就是它了。
【在 K******S 的大作中提到】 : 个人喜欢FLOATING,自己和帮别人装了7,8间了,太适合DIY了,GLUE DOWN的干得时候新手 : 能弄得巨MESSY,虽然全是ENGINEER的,不过还是觉得FLOATING的下面放个垫子对防潮稍 : 微好些.而且GLUE DOWN的万一有热胀冷缩怎么办呢?
|
K******S 发帖数: 10109 | 6 简单的说:
揭地毯,BASE BOARD,一般需要UNDERCUT门框,CLOSET框子,铺UNDERLAYMENT PAD(大
多数的ENGINEER FLOOR只要求地面在1-2尺之内比较平就可以),拼地板,FLOATING的
注意不同行之间的接缝至少要相差40CM才拼得实着。把BASE BOARD装回去就完工了。
【在 K**********r 的大作中提到】 : 支持。可不可以些个详细过程?等弄完了浴室,就是它了。
|
g********3 发帖数: 1281 | 7 Can engineered floor be refinished? it is hardwood floor, right? Really do
not like laminate. |
X***y 发帖数: 3947 | 8 yes. it got at lest 5mm hardwood top layer.
【在 g********3 的大作中提到】 : Can engineered floor be refinished? it is hardwood floor, right? Really do : not like laminate.
|
X***y 发帖数: 3947 | 9 glue down with engineered wood. 不要用太宽的那种。地板越不平,要用越窄的。全
实木的就nail down.但先铺垫层。
【在 R**R 的大作中提到】 : 看样子还得搬着来,俱乐部太安静。 : 看到有人要在水泥地上装地板,我就想要不要讨论一下,什么样的地板好? : Floating 还是 glue down? : 优缺点各是什么?
|
M**6 发帖数: 308 | 10 觉得undercut这个步骤难度比较大耶,超过俺们能力范围了。。。
【在 K******S 的大作中提到】 : 简单的说: : 揭地毯,BASE BOARD,一般需要UNDERCUT门框,CLOSET框子,铺UNDERLAYMENT PAD(大 : 多数的ENGINEER FLOOR只要求地面在1-2尺之内比较平就可以),拼地板,FLOATING的 : 注意不同行之间的接缝至少要相差40CM才拼得实着。把BASE BOARD装回去就完工了。
|
|
|
g*****9 发帖数: 4125 | 11 It is very easy to do with a scrap piece. Set the saw on the scrap piece and
push in , that is it.
【在 M**6 的大作中提到】 : 觉得undercut这个步骤难度比较大耶,超过俺们能力范围了。。。
|
M**6 发帖数: 308 | 12 谢谢你耐心解释哦,不过很惭愧的说。。。还是没看懂。
单爷,您老有空再来个图解吧! |
g*****9 发帖数: 4125 | 13 I use a Fein Multimaster. Set the blade on top a scrap piece and make the
cut.
【在 M**6 的大作中提到】 : 谢谢你耐心解释哦,不过很惭愧的说。。。还是没看懂。 : 单爷,您老有空再来个图解吧!
|
R**R 发帖数: 3318 | 14 就是用一个同样的地板垫在锯下,锯掉门框下的木头,这样新装的地板就可以伸到门框
下了。
六姨太还真好学。
【在 M**6 的大作中提到】 : 谢谢你耐心解释哦,不过很惭愧的说。。。还是没看懂。 : 单爷,您老有空再来个图解吧!
|
R**R 发帖数: 3318 | 15 gezhi,你搞错了,这是大家老爷的六姨太,不是长工,她哪知道什么Fein Multimaster
呀。
再说,就锯个门框,让她给长工花几百块买个Fein Multimaster,她也不干呀。
【在 g*****9 的大作中提到】 : I use a Fein Multimaster. Set the blade on top a scrap piece and make the : cut.
|
M**6 发帖数: 308 | 16 i am trying~ 谢谢鼓励啊:)您还真的搞了个图解,太感动了!
【在 R**R 的大作中提到】 : 就是用一个同样的地板垫在锯下,锯掉门框下的木头,这样新装的地板就可以伸到门框 : 下了。 : 六姨太还真好学。
|
M**6 发帖数: 308 | 17 嘿嘿,又被您一语道破啦。我这不是履行啦啦队职责来cheer up学习气氛的嘛。行了,
我就不添乱了,大家同学们继续讨论技术问题吧。
Multimaster
【在 R**R 的大作中提到】 : gezhi,你搞错了,这是大家老爷的六姨太,不是长工,她哪知道什么Fein Multimaster : 呀。 : 再说,就锯个门框,让她给长工花几百块买个Fein Multimaster,她也不干呀。
|
g*****9 发帖数: 4125 | 18 Sorry, most pro use crain saw, which cuts much faster but more dangerous to
use.
Fein multimaster is for DIY people, they sell this on late night TV.
http://www.craintools.com/fs-specialtysaws.html
Again my apologies to 六姨太.
Multimaster
【在 R**R 的大作中提到】 : gezhi,你搞错了,这是大家老爷的六姨太,不是长工,她哪知道什么Fein Multimaster : 呀。 : 再说,就锯个门框,让她给长工花几百块买个Fein Multimaster,她也不干呀。
|
d********e 发帖数: 2221 | 19 if you want solid wood, apply 3/4" plywood to concrete using screws. then
nail down solid wood planks. |
m****d 发帖数: 86 | 20 Sorry. No Chinese input.
I have a question on taking off the base board.
Is it easy to take it down and put it back?
Do I need to repaint the base board after put it back? |
|
|
R**R 发帖数: 3318 | 21
No really. It is very easy to be broken but it is cheap too.
Yes. There are many nail holes.
【在 m****d 的大作中提到】 : Sorry. No Chinese input. : I have a question on taking off the base board. : Is it easy to take it down and put it back? : Do I need to repaint the base board after put it back?
|
g*****9 发帖数: 4125 | 22 Why do you want to do that?
【在 m****d 的大作中提到】 : Sorry. No Chinese input. : I have a question on taking off the base board. : Is it easy to take it down and put it back? : Do I need to repaint the base board after put it back?
|
K******S 发帖数: 10109 | 23 very easy, usually there will only be some finishing nails on the stud. when
you put it back, nailing only on the studs is enough. You will need to fill
the nail holes and repaint.
【在 m****d 的大作中提到】 : Sorry. No Chinese input. : I have a question on taking off the base board. : Is it easy to take it down and put it back? : Do I need to repaint the base board after put it back?
|
m****d 发帖数: 86 | 24 Thanks 单爷 and KingofMS. |