e*******d
发帖数: 740 | 1 刚买了一个pedant light，大概15 lb吧，不知道屋顶的electrical box能不能吊得住
，请见
图。图中画圈的两个位置应该是螺丝，把整个box固定在房顶的某处，可咋就没有槽呢
？有谁知道这box
是怎么mount上的，mount到什么上，够不够结实。如果我要换掉它，怎么拆呢？先谢了
。 |
e*******d
发帖数: 740 | |
R********r
发帖数: 3415 | 3 where is the pic?
【在 e*******d 的大作中提到】
: 刚买了一个pedant light，大概15 lb吧，不知道屋顶的electrical box能不能吊得住
: ，请见
: 图。图中画圈的两个位置应该是螺丝，把整个box固定在房顶的某处，可咋就没有槽呢
: ？有谁知道这box
: 是怎么mount上的，mount到什么上，够不够结实。如果我要换掉它，怎么拆呢？先谢了
: 。
|
e*******d
发帖数: 740 | |
C*******d
发帖数: 15836 | 5 Unscrew the two screws then you can see what is behind.
If I were you, I would use my hands to try to pull the box to "feel" if it
can hold a 15 pound light. Since it is in the roof which is usually for such
light and/or fan, it usually should hold without problem. |
e*******d
发帖数: 740 | 6 The weird thing is the screws have no grooves on the cap to drive. I am
wondering how the box was installed.
such
【在 C*******d 的大作中提到】
: Unscrew the two screws then you can see what is behind.
: If I were you, I would use my hands to try to pull the box to "feel" if it
: can hold a 15 pound light. Since it is in the roof which is usually for such
: light and/or fan, it usually should hold without problem.
|
C*******d
发帖数: 15836 | 7 It could be installed from above the roof where nuts could hold the screws.
In this case I would not bother to see what's behind. Just feel it and
install it if you think it can hold your light.
【在 e*******d 的大作中提到】
: The weird thing is the screws have no grooves on the cap to drive. I am
: wondering how the box was installed.
:
: such
|
e********t
发帖数: 9607 | 8 如果盒子旁边有木梁，有可能是通过钉子在侧面钉在木梁上的。
【在 e*******d 的大作中提到】
: 图来了。。
|
g********3
发帖数: 1281 | 9 Can you try to screw in two more screws using the other 2 holes?
【在 e*******d 的大作中提到】
: 刚买了一个pedant light，大概15 lb吧，不知道屋顶的electrical box能不能吊得住
: ，请见
: 图。图中画圈的两个位置应该是螺丝，把整个box固定在房顶的某处，可咋就没有槽呢
: ？有谁知道这box
: 是怎么mount上的，mount到什么上，够不够结实。如果我要换掉它，怎么拆呢？先谢了
: 。
|
s**********d
发帖数: 36899 | 10 按要求能穿俩 8-32 吊灯螺丝的都能挂50磅。
15磅轻的很完全灭有担心的必要。 |
