j*****I
发帖数: 2626 | 1 就是象tint的那种。旧了，褪色了，揭的时候发现非常粘。有没有什么药水，可以干这
个的？ 汽油味道实在是太大了。
xiexie | e********t
发帖数: 9607 | 2 http://www.gilafilms.com/en/Film-FAQ.aspx
If the Removal solution is not available in your area, the steps below
outline an alternate method of removing any brand of window film:
GATHER TOOLS
Single-edge razor blades in a holder/scraper
Spray bottle filled with 8oz water, 4 oz ammonia, 1 tsp dishwasher liquid
soap
Disposable toweling to clean the razor blade edge
Old towel to protect window sill from loose adhesive
Drop cloth to protect floor
REMOVE THE TOP FILM LAYER
Use the razor blade to loosen the top 1/2 - 3/4 inches along the top edge of
the film. Spray the ammonia-water solution (aka "the solution") behind the
lifted film and allow to soak for a minute. As you pry the film loose,
continue to spray behind the loosened film. Continue this process until you
have peeled 3-4 inches free from the glass. Using both hands, grasp this
loosened film and pull the film downward. You may find it easier to peel
diagonally from one corner to the center, then the other corner toward the
center, then bunch the film up in your hands and pull the remainder down
toward the bottom of the window. If the film sticks, spray the solution
behind it to loosen the grip of the adhesive. As you rip the film from the
window, the tearing sound you hear is the shredding of the old adhesive as
part of it comes away with the film and part of it remains on the glass.
If you have the time and the film has been in place more than five years, do
the job overnight while you sleep. Spray the solution onto the top of the
film, then cover the entire glass area with a precut plastic sheet (i.e. 30-
60 gal trash bag cut to size). Apply the plastic sheet on top of the wet
film, then use masking tape strips to secure the bag around the inside of
the window frame. Allow it to sit for 2-4 hours, then peel back the top edge
, spray 10-20 "squirts" of the solution behind the plastic sheet, then
reseal the top and allow to sit for 2-4 more hours (or overnight). During
this time, the solution will soften the adhesive so you can more easily peel
the old film from the window.
CAUTION: Do not leave a black or dark plastic bag suspended over the window,
especially if you have dual-pane windows. Leaving the bag in place on a
warm/hot day can cause a significant heat stress to your windows, which
could contribute to a window crack.
REMOVE THE ADHESIVE
After removing the film, a translucent or clear layer of adhesive may remain
on the glass. To remove, generously spray the entire surface with the
solution. Rub the solution into the "dry" adhesive until it becomes milky
white. This color is a sign that the adhesive has broken its bond to the
glass and has become pliable enough to shave off. Re-spray the area you plan
to shave and use a new razor blade. Shave upward in quick movements. As the
adhesive collects on the blade, wipe it clean with an old towel. (Note:
When you are finished with the job, throw towel away).Do not let the
adhesive fall onto carpet or fabrics. Change blades as frequently as needed
to keep a sharp edge and avoid scratching the glass.
【在 j*****I 的大作中提到】
: 就是象tint的那种。旧了，褪色了，揭的时候发现非常粘。有没有什么药水，可以干这
: 个的？ 汽油味道实在是太大了。
: xiexie
|
|
