m******s 发帖数: 612 | 1 miter saw是dewalt的,应该不错了。 |
d*h 发帖数: 2347 | 2 哪个牌子没关系,关键是齿数。80齿+的。
【在 m******s 的大作中提到】![](/moin_static193/solenoid/img/up.png) : miter saw是dewalt的,应该不错了。
|
m******s 发帖数: 612 | |
m******s 发帖数: 612 | |
p**********g 发帖数: 9558 | 5 有个tip,试试用paint tape沾住要锯的部分,可以很好的解决问题 |
d*h 发帖数: 2347 | 6 另一个tip是锯子转的方向,切进木头的地方不会劈,切出来的地方会。
【在 m******s 的大作中提到】![](/moin_static193/solenoid/img/up.png) : 谢谢。
|
l******c 发帖数: 2555 | 7 all in one saw(rip, cross cut and angle cut) at lowes $159
【在 m******s 的大作中提到】![](/moin_static193/solenoid/img/up.png) : miter saw是dewalt的,应该不错了。
|
d**********0 发帖数: 13081 | 8 切 plywood 的时候, 是不是这样做挺好?
【在 p**********g 的大作中提到】![](/moin_static193/solenoid/img/up.png) : 有个tip,试试用paint tape沾住要锯的部分,可以很好的解决问题
|
p**********g 发帖数: 9558 | 9 10 Tips For Cutting Plywood
tip 6
Masking Tape – Put masking tape over the cut line to help keep the
fibers on the edge from pulling up.
dzone.com/tips/10_plywood_cutting_tips.htm
【在 d**********0 的大作中提到】![](/moin_static193/solenoid/img/up.png) : 切 plywood 的时候, 是不是这样做挺好?
|
p**********g 发帖数: 9558 | 10 http://joneakes.com/jons-fixit-database/1712-How-do-you-avoid-s
Where the teeth come out of the wood, you can get splinters. The faster the
cut, the larger the teeth, the more perpendicular to the surface and the
duller the teeth, the more splinters you will get.
For a hand saw, the splinters are on the bottom of the wood. For a portable
circular saw, the splinters are on the top of the wood. For a table saw the
splinters are on the bottom of the wood. For a Radial Arm Saw, the splinters
are on the bottom of the wood. For a sliding mitre box, the splinters are
on the top of the wood.
When using round saw blades, the angle at which the blade comes out of the
wood is important. If you have a circular saw with the shoe set to maximum
depth, you will get more splintering than if you set it so that it will just
barely cut through the wood, because the angle that the teeth come out of
the wood is lower to the wood when you are working on the outside of the
curve of the blade. Of course a very sharp blade and a slow cut will reduce
splinters tremendously.
Applying masking tape to the cut and cutting right through the tape will
help as well because then the neighbouring fibres are supporting the one
being attacked by the cutting tip. Be careful to not use a tape that will
leave a glue residue that can effect your finish.
The cabinet making tip is to score the cut line with a sharp knife,
essentially cutting off all the splinters before making them. Then saw right
up next to this cut, without hitting the cut itself or crossing over to the
other side. You will still create splinters, but they will break at the cut
line and there is not pressure on the fibres the other side of this line.
In the photo I was way off of the cut line just to show how the top fibres
lift and break at the line. For a precession cut, just keep your saw teeth
on or outside of that score mark and you will have a perfect splinter free
cut. |
d**********0 发帖数: 13081 | 11 是。 我买这plywood 时,请他们帮忙锯小, 就看到边上起皮。。
【在 p**********g 的大作中提到】![](/moin_static193/solenoid/img/up.png) : 10 Tips For Cutting Plywood : tip 6 : Masking Tape – Put masking tape over the cut line to help keep the : fibers on the edge from pulling up. : dzone.com/tips/10_plywood_cutting_tips.htm
|
s*i 发帖数: 5025 | 12 大赞!
【在 p**********g 的大作中提到】![](/moin_static193/solenoid/img/up.png) : 10 Tips For Cutting Plywood : tip 6 : Masking Tape – Put masking tape over the cut line to help keep the : fibers on the edge from pulling up. : dzone.com/tips/10_plywood_cutting_tips.htm
|