n*******n
发帖数: 1115 | 1 砖墙，开个8inch的洞为装油烟机用，一般请什么样的contractor，多少钱？ |
m*****3
发帖数: 13701 | 2 8-inch, are you sure? Most people use 6-inch pipes I believe. For your
reference, I just had quotes from several local Chinese contractors last
month, it would cost about $300 to open a 6-inch round hole on a second-
floor kitchen brick wall. The price may vary depending on which floor your
kitchen is (the higher the more expensive), where exactly the hole is, as
well as how far the hole is from the range hood if you want the pipe
installed. Good luck! |
y*f
发帖数: 2202 | 3 神器都是8"
【在 m*****3 的大作中提到】
: 8-inch, are you sure? Most people use 6-inch pipes I believe. For your
: reference, I just had quotes from several local Chinese contractors last
: month, it would cost about $300 to open a 6-inch round hole on a second-
: floor kitchen brick wall. The price may vary depending on which floor your
: kitchen is (the higher the more expensive), where exactly the hole is, as
: well as how far the hole is from the range hood if you want the pipe
: installed. Good luck!
|
l*********u
发帖数: 19053 | 4 装油烟机的老中，150
【在 n*******n 的大作中提到】
: 砖墙，开个8inch的洞为装油烟机用，一般请什么样的contractor，多少钱？
|
n*******n
发帖数: 1115 | 5 150包括打洞和装油烟机吗？什么地方这么便宜？
【在 l*********u 的大作中提到】
: 装油烟机的老中，150
|
y*******j
发帖数: 141 | 6 神器三不是10寸吗？
【在 y*f 的大作中提到】
: 神器都是8"
|
l*********u
发帖数: 19053 | 7 是，toronto ：）
【在 n*******n 的大作中提到】
: 150包括打洞和装油烟机吗？什么地方这么便宜？
|
i***e
发帖数: 9429 | 8 需要专业工具打的，打出来10寸洞非常完美。
找concrete coring company
估计至少得350刀 |
m********s
发帖数: 55301 | 9 800
【在 n*******n 的大作中提到】
: 砖墙，开个8inch的洞为装油烟机用，一般请什么样的contractor，多少钱？
|
k****y
发帖数: 4083 | |
i***e
发帖数: 9429 | 11 500 可能，800 估计没那么高。
看到那帮家伙不是用 Core Drill Rig，从setup 到打完估计30分钟够了。 |
