r***n
发帖数: 64 | 1 给植物换水时，不小心把陶瓷的水槽砸裂了。里外都裂了，现在水槽有漏水。裂缝看起
来不太明显。问问版上的大拿们，水槽一定要换吗？或者用什么silicone类的密封剂把
裂缝补上就好？这个水槽也就平常用完洗手间，洗洗手用。谢谢。
[发表自未名空间手机版 - m.mitbbs.com] |
c****o
发帖数: 32446 | 2 换了就是，又没几个钱
【在 r***n 的大作中提到】
: 给植物换水时，不小心把陶瓷的水槽砸裂了。里外都裂了，现在水槽有漏水。裂缝看起
: 来不太明显。问问版上的大拿们，水槽一定要换吗？或者用什么silicone类的密封剂把
: 裂缝补上就好？这个水槽也就平常用完洗手间，洗洗手用。谢谢。
: [发表自未名空间手机版 - m.mitbbs.com]
|
r***n
发帖数: 64 | 3 是没几个钱。但要卸counter,换完后还要把counter装回去密封。counter上还有镜子。
比较麻烦。想先找个简单点的方法。
[发表自未名空间手机版 - m.mitbbs.com]
【在 c****o 的大作中提到】
: 换了就是，又没几个钱
|
b*****g
发帖数: 2727 | 4 epoxy may work
【在 r***n 的大作中提到】
: 是没几个钱。但要卸counter,换完后还要把counter装回去密封。counter上还有镜子。
: 比较麻烦。想先找个简单点的方法。
:
: [发表自未名空间手机版 - m.mitbbs.com]
|
x****u
发帖数: 12955 | 5
why do you need to remove counter to replace sink?
【在 r***n 的大作中提到】
: 是没几个钱。但要卸counter,换完后还要把counter装回去密封。counter上还有镜子。
: 比较麻烦。想先找个简单点的方法。
:
: [发表自未名空间手机版 - m.mitbbs.com]
|
b**********y
发帖数: 7371 | 6 明显是under counter mount
【在 x****u 的大作中提到】
:
: why do you need to remove counter to replace sink?
|
M****u
发帖数: 17708 | 7 那也不需要卸台面
【在 b**********y 的大作中提到】
: 明显是under counter mount
|
b**********y
发帖数: 7371 | 8 哦，那你给演示一下吧
【在 M****u 的大作中提到】
: 那也不需要卸台面
|
x****u
发帖数: 12955 | 9
Undermount sink should be removed from the bottom. You don't need to touch
the counter.
【在 b**********y 的大作中提到】
: 明显是under counter mount
|
r***n
发帖数: 64 | 10 谢谢大牛们的诸多建议。
第一张照片是整体水槽，第二张是裂缝处的局部照片。LD已经用EPOXY试着抹了抹裂缝
，好像已经干了。还没试，不知道管用不。
这个水槽看起来是undermount的吗？如果不用动台板就能换水槽，那是最好的了。有人
试过吗？有什么要特别注意的呢？
touch
【在 x****u 的大作中提到】
:
: Undermount sink should be removed from the bottom. You don't need to touch
: the counter.
|
|
|
x****u
发帖数: 12955 | 11
That's an under mount sink. There should be some mounting clip under the
counter that attaches the sink to the counter. Remove those, then use a
thin knife to cut the silicon sealant between sink bowl and counter, the
sink should come loose from the counter. Make sure you have something to
support the sink while you are doing this so it doesn't fall 3 feet and
crash your cabinet.
Then you need to find a new sink bowl with exact physical dimension, and I
mean very exact. Otherwise you won't be able to reuse the existing clips.
However, since this is small a vanity sink, it may be easier and cheaper to
just replace the whole vanity. I've seen similar sink at HD for 400-500.
【在 r***n 的大作中提到】
: 谢谢大牛们的诸多建议。
: 第一张照片是整体水槽，第二张是裂缝处的局部照片。LD已经用EPOXY试着抹了抹裂缝
: ，好像已经干了。还没试，不知道管用不。
: 这个水槽看起来是undermount的吗？如果不用动台板就能换水槽，那是最好的了。有人
: 试过吗？有什么要特别注意的呢？
:
: touch
|
r***n
发帖数: 64 | 12 Thanks. I checked the inside of the vanity. Four wooden blocks were nailed
into the counter top to support the bowel. So I guess it would not be easy
to remove the cracking bowel w/o further damage to the counter top. Probably
we have to change the whole vanity as you said.
to
【在 x****u 的大作中提到】
:
: That's an under mount sink. There should be some mounting clip under the
: counter that attaches the sink to the counter. Remove those, then use a
: thin knife to cut the silicon sealant between sink bowl and counter, the
: sink should come loose from the counter. Make sure you have something to
: support the sink while you are doing this so it doesn't fall 3 feet and
: crash your cabinet.
: Then you need to find a new sink bowl with exact physical dimension, and I
: mean very exact. Otherwise you won't be able to reuse the existing clips.
: However, since this is small a vanity sink, it may be easier and cheaper to
|
u****q
发帖数: 24345 | |
x******t
发帖数: 3911 | 14 Just change the vanity and keep the cabinet if it is in good condition. |
b**********y
发帖数: 7371 | 15 不是所有的都能从柜子下面拿出来，拿不出来最后拆counter top的不要太多
to
【在 x****u 的大作中提到】
:
: That's an under mount sink. There should be some mounting clip under the
: counter that attaches the sink to the counter. Remove those, then use a
: thin knife to cut the silicon sealant between sink bowl and counter, the
: sink should come loose from the counter. Make sure you have something to
: support the sink while you are doing this so it doesn't fall 3 feet and
: crash your cabinet.
: Then you need to find a new sink bowl with exact physical dimension, and I
: mean very exact. Otherwise you won't be able to reuse the existing clips.
: However, since this is small a vanity sink, it may be easier and cheaper to
|
w******2
发帖数: 1664 | 16 他说的也没错，这几天我就在装under mount 的sink，下面有4个卡扣扣住sink。所以
从下面可以拆sink。
touch
【在 x****u 的大作中提到】
:
: That's an under mount sink. There should be some mounting clip under the
: counter that attaches the sink to the counter. Remove those, then use a
: thin knife to cut the silicon sealant between sink bowl and counter, the
: sink should come loose from the counter. Make sure you have something to
: support the sink while you are doing this so it doesn't fall 3 feet and
: crash your cabinet.
: Then you need to find a new sink bowl with exact physical dimension, and I
: mean very exact. Otherwise you won't be able to reuse the existing clips.
: However, since this is small a vanity sink, it may be easier and cheaper to
|
