l***i
发帖数: 38 | 1 I am modeling load ring direct on a thin plate. I don't want to model it as a
contact problem. I just want to treat the load as a line load. Can anybody
answer this question? I really really have no clue and the guy who is doing
experiments is really after me with this problem. Thanks!!!!!!!!!!!! |
s*****h
发帖数: 234 | 2 draw a ring (maybe donut) on the plate, the ring may divide the plate into s
everal zones, mesh each zone individully. Then add distributed load on the e
lements which fill the ring.
a
【在 l***i 的大作中提到】
: I am modeling load ring direct on a thin plate. I don't want to model it as a
: contact problem. I just want to treat the load as a line load. Can anybody
: answer this question? I really really have no clue and the guy who is doing
: experiments is really after me with this problem. Thanks!!!!!!!!!!!!
|
l***i
发帖数: 38 | 3
No, I want to model it as line force. BTW, do you know how to choose some
nodal points as a set? I want to first discretize the plate and find the nodal
points. Then I will apply concentrate load on the collected nodal points.
However, I don't know how to choose those nodal points and apply load. Please
help!
【在 s*****h 的大作中提到】
: draw a ring (maybe donut) on the plate, the ring may divide the plate into s
: everal zones, mesh each zone individully. Then add distributed load on the e
: lements which fill the ring.
:
: a
|
s*****h
发帖数: 234 | 4 I use Hypermesh do the pre-, In hypermesh, to make node set is very easy.
nodal
Please
【在 l***i 的大作中提到】
:
: No, I want to model it as line force. BTW, do you know how to choose some
: nodal points as a set? I want to first discretize the plate and find the nodal
: points. Then I will apply concentrate load on the collected nodal points.
: However, I don't know how to choose those nodal points and apply load. Please
: help!
|
p**e
发帖数: 126 | 5 it does not take much time ot read through abaqus manual at least
it should not take much time to find out the answer to your questions
【在 s*****h 的大作中提到】
: I use Hypermesh do the pre-, In hypermesh, to make node set is very easy.
:
: nodal
: Please
|
