b**m 发帖数: 18 | 1 Hi, I tried several times to observe the spherulites, but failed. Now my boss
asked me to use neat nylon to familiaze the technique. But I still cannot
observe anything!
What I did were;
(1) I used a compression molding machine to raise the temperature to about
240C, without applying pressure. The nylon pellets were placed on a glass
plate on top of a steel stage.
(2) Then I pressed another glass plate on the nylon melt and press it hard.
(3) Then I took the steel stage off, and let the system c | b***e 发帖数: 115 | 2 我不知道nylon有没有球晶
但是,按照你的结晶过程,一般来说,球是可以看到的
你有没有调整焦距啊。焦距很重要你确信你的焦距一定正确吗?
光的强度不要太高。当然也不能什么都看不见
关于球晶尺寸,主要决定于他高分子本身,很难说
大的有mm级,小的有um
级,还有你用的样品量太多,只要一点点就够了
有很多高分子本身就没有球晶,要注意这一点
【在 b**m 的大作中提到】![](/moin_static193/solenoid/img/up.png) : Hi, I tried several times to observe the spherulites, but failed. Now my boss : asked me to use neat nylon to familiaze the technique. But I still cannot : observe anything! : What I did were; : (1) I used a compression molding machine to raise the temperature to about : 240C, without applying pressure. The nylon pellets were placed on a glass : plate on top of a steel stage. : (2) Then I pressed another glass plate on the nylon melt and press it hard. : (3) Then I took the steel stage off, and let the system c
| b**m 发帖数: 18 | 3
I've read papers showing spherulites in nylon...
Thanks. I'll keep trying..
boss
hard.
Can
【在 b***e 的大作中提到】![](/moin_static193/solenoid/img/up.png) : 我不知道nylon有没有球晶 : 但是,按照你的结晶过程,一般来说,球是可以看到的 : 你有没有调整焦距啊。焦距很重要你确信你的焦距一定正确吗? : 光的强度不要太高。当然也不能什么都看不见 : 关于球晶尺寸,主要决定于他高分子本身,很难说 : 大的有mm级,小的有um : 级,还有你用的样品量太多,只要一点点就够了 : 有很多高分子本身就没有球晶,要注意这一点
|
|