s****9 发帖数: 2226 | 1 电脑上的飞行模拟(如微软的模拟飞行)只有视觉效果,没有坐椅本身的运动翻转带来
的刺激,要是市面上有这种模拟机舱,配合现在的3D视觉技术,对空战飞行游戏玩家肯
定很有吸引力 |
t*******y 发帖数: 21396 | |
y*h 发帖数: 25423 | 3 做这玩意儿技术上没有任何问题,主要是一般玩家买不起,带液压动态系统的
模拟器造价都是以百万美元计的,即使民用游戏型简化一下也比一辆高档汽车
贵得多。
【在 s****9 的大作中提到】 : 电脑上的飞行模拟(如微软的模拟飞行)只有视觉效果,没有坐椅本身的运动翻转带来 : 的刺激,要是市面上有这种模拟机舱,配合现在的3D视觉技术,对空战飞行游戏玩家肯 : 定很有吸引力
|
j*****p 发帖数: 24000 | |
r******n 发帖数: 4522 | 5 玩儿不起,普通人上去翻几下不晕死才怪,哪儿有市场? |
a***c 发帖数: 2443 | 6
http://www.youtube.com/watch?v=8bLwvoPD2Zg
http://www.youtube.com/watch?v=uVOhIezQ7Pc
http://www.youtube.com/watch?v=vFNn6hvhuMQ&feature=related
most people would be very satisfied with a 3DoF setup. You could build
one for a few grand with powerful linear actuators (for simulating
dogfights) with ~15cm of travel on each axis. If you just want to
simulate flying commercial, you could use servo motors instead, much
much cheaper. A full-blown 6DoF hydraulic setup is probably not
realistic for home use, not to mention it would be ridiculously
expensive.
of course, there are plug-and-play products out there that go for
~us$25k and up.
【在 s****9 的大作中提到】 : 电脑上的飞行模拟(如微软的模拟飞行)只有视觉效果,没有坐椅本身的运动翻转带来 : 的刺激,要是市面上有这种模拟机舱,配合现在的3D视觉技术,对空战飞行游戏玩家肯 : 定很有吸引力
|
y*h 发帖数: 25423 | 7 晕倒不会,模拟器主要是模拟姿态和少量的小加速度,真正的大加速度过载和
失重是模拟不出来的,要模拟那个得上过山车。
【在 r******n 的大作中提到】 : 玩儿不起,普通人上去翻几下不晕死才怪,哪儿有市场?
|
e*******g 发帖数: 1488 | 8 很负责的告诉你们,哥在中国就搞这个的(基于GIS作战仿真的飞行模拟),我们的技
术都是自己的,而且很先进,买法国的回来和我们的一比较,我们的先进很多,GIS方
面也比他们做的要好,你们不了解不要瞎说 |
a***c 发帖数: 2443 | 9 3 linear actuators - ~$2000
driver pcb - diy ~$100
software - open source - free
platform (aluminum extrusions, fasteners, ball-joints) $200 - $1000
misc (power supply, etc) - ~$500 or free depending on what you have
laying around the house.
keep in mind some of these parts can be bought used or substituted with
lower quality parts from home depot.
if you can afford a dslr with a couple of decent lenses, you can afford
a motion platform.
【在 j*****p 的大作中提到】 : 有玩家自己 : DIY的 : 都花了十几万美元
|
y*h 发帖数: 25423 | 10 这种玩意儿安上座椅坐上人再放上大屏幕加控制杆和方向舵还能动多快?
没有液压系统用电机慢慢转那基本只能哄哄小朋友玩。
【在 a***c 的大作中提到】 : 3 linear actuators - ~$2000 : driver pcb - diy ~$100 : software - open source - free : platform (aluminum extrusions, fasteners, ball-joints) $200 - $1000 : misc (power supply, etc) - ~$500 or free depending on what you have : laying around the house. : keep in mind some of these parts can be bought used or substituted with : lower quality parts from home depot. : if you can afford a dslr with a couple of decent lenses, you can afford : a motion platform.
|
a***c 发帖数: 2443 | 11 http://www.automation4less.com/servact1a.htm
take a look at SCN5 and SCN6
the SCN5 is pretty popular among the diy folks.
I'm sure there are better actuators out there that are more suited for
the application.
With a clever counterweighting pivot mechanism, you could twist and
turn a 250lb load pretty hard without much trouble even with these
cheap actuators.
【在 y*h 的大作中提到】 : 这种玩意儿安上座椅坐上人再放上大屏幕加控制杆和方向舵还能动多快? : 没有液压系统用电机慢慢转那基本只能哄哄小朋友玩。
|
y*h 发帖数: 25423 | 12 飞液压的作动器最大的缺点是基本只能俯仰倾斜不能做大幅度的上下运动和前后
运动产生过载和失重感觉
【在 a***c 的大作中提到】 : http://www.automation4less.com/servact1a.htm : take a look at SCN5 and SCN6 : the SCN5 is pretty popular among the diy folks. : I'm sure there are better actuators out there that are more suited for : the application. : With a clever counterweighting pivot mechanism, you could twist and : turn a 250lb load pretty hard without much trouble even with these : cheap actuators.
|
e*******g 发帖数: 1488 | 13 过载可以通过TRU做到,可以做到很大...
【在 y*h 的大作中提到】 : 飞液压的作动器最大的缺点是基本只能俯仰倾斜不能做大幅度的上下运动和前后 : 运动产生过载和失重感觉
|
s****9 发帖数: 2226 | 14 可以放在游戏房按时间收费嘛
【在 y*h 的大作中提到】 : 做这玩意儿技术上没有任何问题,主要是一般玩家买不起,带液压动态系统的 : 模拟器造价都是以百万美元计的,即使民用游戏型简化一下也比一辆高档汽车 : 贵得多。
|