c****7
发帖数: 838 | 1 “Comment 194 by j********[email protected], Oct 29 (4 days ago)
I have ported 3 touchpads now and found that if the touchpad was stock and
no preware or tweaks were made to try to make webos quicker the touchpad
does not SOD.
The one that had preware installed and tweaked is the touchpad that is
having all the SOD issues. Having said that, softlocker does resolve the
issue but uses alot of battery.
Maybe try removing everything from the touchpad and get it back to factory
settings and then port CM7 back onto it.
Cheers.
”
我的32G曾经装过preware和补丁，然后升级到CM2.1，接着升级webos3.0.4，然后立即
重装mboot。启动到cm7后，再也没用过webos，CM7 alpha2.1从来没有SOD. 也许升级3
.0.4把preware抹掉了？
死机的同学可以试试uninstall CM7， 然后doctor，重装CM7. |
T***N
发帖数: 351 | 2 Could be related. CM7 alpha2.1 used to SOD multiple times each day. But
after I removed 超频kernel, it happened very occasionally. Maybe should try
to remove preware as well since I don't use webos at all.
【在 c****7 的大作中提到】
: “Comment 194 by j********[email protected], Oct 29 (4 days ago)
: I have ported 3 touchpads now and found that if the touchpad was stock and
: no preware or tweaks were made to try to make webos quicker the touchpad
: does not SOD.
: The one that had preware installed and tweaked is the touchpad that is
: having all the SOD issues. Having said that, softlocker does resolve the
: issue but uses alot of battery.
: Maybe try removing everything from the touchpad and get it back to factory
: settings and then port CM7 back onto it.
: Cheers.
|
x*****9
发帖数: 3256 | 3
昨天也试了一下
我没恢复出厂
只是full eraser
开机还是3.0.4
然后重新刷了2.1
到现在为止木有再死过
【在 c****7 的大作中提到】
: “Comment 194 by j********[email protected], Oct 29 (4 days ago)
: I have ported 3 touchpads now and found that if the touchpad was stock and
: no preware or tweaks were made to try to make webos quicker the touchpad
: does not SOD.
: The one that had preware installed and tweaked is the touchpad that is
: having all the SOD issues. Having said that, softlocker does resolve the
: issue but uses alot of battery.
: Maybe try removing everything from the touchpad and get it back to factory
: settings and then port CM7 back onto it.
: Cheers.
|
m******p
发帖数: 5393 | 4 mark
【在 c****7 的大作中提到】
: “Comment 194 by j********[email protected], Oct 29 (4 days ago)
: I have ported 3 touchpads now and found that if the touchpad was stock and
: no preware or tweaks were made to try to make webos quicker the touchpad
: does not SOD.
: The one that had preware installed and tweaked is the touchpad that is
: having all the SOD issues. Having said that, softlocker does resolve the
: issue but uses alot of battery.
: Maybe try removing everything from the touchpad and get it back to factory
: settings and then port CM7 back onto it.
: Cheers.
|
J*********r
发帖数: 5921 | 5 Worth a try. I just had my very first SOD this afternoon.
try
【在 T***N 的大作中提到】
: Could be related. CM7 alpha2.1 used to SOD multiple times each day. But
: after I removed 超频kernel, it happened very occasionally. Maybe should try
: to remove preware as well since I don't use webos at all.
|
