n******l
发帖数: 3427 | 1 【 以下文字转载自 Hardware 讨论区 】
发信人: nekingll (nekingll), 信区: Hardware
标 题: pogoplug PRO 求助
发信站: BBS 未名空间站 (Tue Mar 27 11:44:44 2012, 美东)
按照这个link的介绍安装的
http://archlinuxarm.org/platforms/armv6/pogoplug-provideov3
执行到14步骤的时候reboot，然后就出现如下的描述
If your Pogoplug boots and the front LED blinks wildly for about 15-20
seconds and then TURNS OFF, you're in business when it comes to booting, but
there is likely something that has stopped the network. It's not a brick,
but be ready to troubleshoot.
拔下USB也不能启动了，SSH也连不上。
请教如何制作介绍上所说的，手上没有其他linux的设备了，window下需要如何操作？
Place your boot drive in another Linux computer/device and check the file
system. If you're still having issues then we'll proceed with starting from
scratch on the rootfs. Following steps 7 and 8 above, partition and format
the drive (using the correct /dev device, highly likely NOT sda). Download
and extract the root filesystem tarball onto the new ext3 partition as the
root user, not just sudo. Create a file at /usr/local/mac_addr and place in
it your Pro's MAC address (its on the bottom of the unit) in the format XX:
XX:XX:XX:XX:XX. Safely umount the drive from the computer, plug it back in
to the powered-off Pogoplug, and then plug in the Pogoplug.
第一次刷，就变砖? |
|
