C********n
发帖数: 6682 | |
S******n
发帖数: 5022 | |
J********o
发帖数: 17447 | |
C********n
发帖数: 6682 | 4 貌似更新完副厂电池就不能用了
【在 S******n 的大作中提到】
: 跟新吧。
: f8对焦大有改进。
|
T*****g
发帖数: 1434 | 5 确定吗？ 俺刚买了两块2800mAh的。
不过，应该可以再刷回去的。
【在 C********n 的大作中提到】
: 貌似更新完副厂电池就不能用了
|
J********o
发帖数: 17447 | 6 刷不回去
应该能用就是不显示电池信息
【在 T*****g 的大作中提到】
: 确定吗？ 俺刚买了两块2800mAh的。
: 不过，应该可以再刷回去的。
|
S******n
发帖数: 5022 | 7 http://www.usa.canon.com/nw3s/CanonUSA/DownloadContents/English
美国官网早出来了
Changes
Firmware Version 1.2.1 incorporates the following functional improvements
and fixes.
1. Uncompressed HDMI output is now enabled.
2. Enables the center AF point to autofocus when the camera is used with
Canon EF lens/extender combinations whose combined maximum aperture is f/8.
3. Improves the speed of the camera's acquisition of focus when using a
Canon Speedlite's AF-assist beam.
4. Fixes a phenomenon in which the LCD monitor may freeze and display Err 70
or Err 80 when a still photo is taken during Live View or in movie shooting
mode.
5. Fixes a phenomenon that may occur when the continuous shooting priority
setting is enabled for multiple exposures, such that, after the sixth image
is taken, there is a slight pause before the remainder of the sequence is
completed.
6. Fixes a phenomenon in which the viewfinder display shows incorrect
information during AEB shooting.
7. Communication with the WFT-E7 Wireless File Transmitter has been improved.
8. When images have been successfully transferred with the WFT-E7 Wireless
File Transmitter through the FTP protocol, an "O" will be displayed. When
images have not been successfully transferred with the WFT-E7 Wireless File
Transmitter through the FTP protocol, an "X" will be displayed.
9. Fixes a phenomenon in which the camera may not function properly when an
Eye-Fi card is used.
10. Fixes a phenomenon in which the focal length value listed in the Exif
information is not displayed correctly for images shot with the EF 24-70mm
F4L IS USM lens.
11. Fixes a phenomenon in which the lens firmware cannot be updated properly.
12. Corrects errors in the Arabic language menu.
13. Fixes a phenomenon in which the camera changes the AF microadjustment
value to -8.
14. Fixes a phenomenon in which the on-screen guidance cannot be fully
displayed when setting the maximum limit value for the "Setting the ISO
Speed Range for Auto ISO" option.
【在 C********n 的大作中提到】
: 其他的地区都出来了
: 不过
: 要更新马
|
G*******g
发帖数: 3729 | 8 这些貌似1Dx1月份的firmware update就有了。
.
【在 S******n 的大作中提到】
: http://www.usa.canon.com/nw3s/CanonUSA/DownloadContents/English
: 美国官网早出来了
: Changes
: Firmware Version 1.2.1 incorporates the following functional improvements
: and fixes.
: 1. Uncompressed HDMI output is now enabled.
: 2. Enables the center AF point to autofocus when the camera is used with
: Canon EF lens/extender combinations whose combined maximum aperture is f/8.
: 3. Improves the speed of the camera's acquisition of focus when using a
: Canon Speedlite's AF-assist beam.
|
l*****s
发帖数: 1754 | 9 有意思，只有12是correct an error, 其它都是 Fixes a phenomenon. Why not admit
those are error too. |
o****p
发帖数: 9785 | 10 error是always happen的，phenomenon是特定情况下发生的，我感觉是这么区分用法的。
【在 l*****s 的大作中提到】
: 有意思，只有12是correct an error, 其它都是 Fixes a phenomenon. Why not admit
: those are error too.
|
