c******k
发帖数: 1140 | 1 I have the following setup:
A pulse fiber laser（1ps） + 1x2 beam splitter + one paddle (fiber
polarization cotroller) on each arm of the splitter－> two inputs on the FR-
103XL (Femtochrome research, Inc).
就是用示波器观测这两个arm 的 crosscorrelation trace,但是捅鼓好几天了，死活出
不来信号？用过的牛人给点提示。 | c******k
发帖数: 1140 | 2 或者有朋友用过这个东东，来研究Ultrafast optics，想交流下经验。
FR-
【在 c******k 的大作中提到】
: I have the following setup:
: A pulse fiber laser（1ps） + 1x2 beam splitter + one paddle (fiber
: polarization cotroller) on each arm of the splitter－> two inputs on the FR-
: 103XL (Femtochrome research, Inc).
: 就是用示波器观测这两个arm 的 crosscorrelation trace,但是捅鼓好几天了，死活出
: 不来信号？用过的牛人给点提示。
| b****r
发帖数: 2555 | 3 What can I say? There are tons of reasons that you donot get output
from an auto-correlator. Last time, a Newport service engineer can
not get his auto-correlator to work in my lab.
Since apparently you are using a commercial one, my only suggestion
is that you should follow user manual or just call the technical
support.
【在 c******k 的大作中提到】
: 或者有朋友用过这个东东，来研究Ultrafast optics，想交流下经验。
:
: FR-
|
|
