m******r
发帖数: 9604 | 1 我的305今天在山地标准时间7点半没信号了，一直到现在都没恢复 | m**k
发帖数: 18660 | 2 我的还有啊。
【在 m******r 的大作中提到】
: 我的305今天在山地标准时间7点半没信号了，一直到现在都没恢复
| A***a
发帖数: 3603 | 3 我的在东部时间10点用了，挺好。
★ Sent from iPhone App: iReader Mitbbs Lite 7.39 | f*******g
发帖数: 3304 | 4 我的还好啊 几个月木有用心率带今天用了一下 工作也正常啊
你试试SOFT RE-SET AND 硬启动
The soft reset is simply performed by pressing the lap + mode buttons at the
same time. This will cause your unit to power down if it is on/frozen (and
often the unit appears off when frozen). No data will be lost using this
reset. Press the power button to startup and most problems will be cleared.
The next most common reset is this hard-reset performed by holding down the
mode button while powering on (two buttons, that's it). When your unit
powers on you will be prompted as to whether you really want to perform the
reset or not (be sure you do if you answer yes as you will lose your data).
This reset often needs to be preceded by the soft-reset.
The third reset is another hard-reset, but you should only use this one as a
last resort as it bypasses the prompt in the more common hard-reset. It can
be hard to do, so you may want to try a few times if nothing happens. Press
and hold mode and enter. Press power but do not hold it. Continue holding
mode and enter for several seconds. If it works, the unit should power on
and go through the initial settings wizard after you release the buttons. On
my unit, I can see the screen flicker after I press and release the power
button, and that's how I know that I can release the other buttons.
【在 m******r 的大作中提到】
: 我的305今天在山地标准时间7点半没信号了，一直到现在都没恢复
| y******n
发帖数: 4527 | 5 我的已经一个多月没用了，不晓得还活着不
【在 m******r 的大作中提到】
: 我的305今天在山地标准时间7点半没信号了，一直到现在都没恢复
|
|
