m**x 发帖数: 1084 | 1 变大很容易,能变小吗
想是从4 5/8 -> 4 3/8. |
K****D 发帖数: 30533 | 2 No way without risking damaging the racket.
In fact, change from 4 3/8 to 4 5/8 is not easy either without
changing the weight/balance too much.
【在 m**x 的大作中提到】 : 变大很容易,能变小吗 : 想是从4 5/8 -> 4 3/8.
|
a****n 发帖数: 4734 | 3 把replacement grip 去掉,缠两层或一层over grip, 但是没办法减两号 |
K****D 发帖数: 30533 | 4 One overgrip is only 半号 and it weighs 5-6g.
【在 a****n 的大作中提到】 : 把replacement grip 去掉,缠两层或一层over grip, 但是没办法减两号
|
a*****3 发帖数: 10373 | 5 man, just trade it or sell it and then buy another one.
【在 m**x 的大作中提到】 : 变大很容易,能变小吗 : 想是从4 5/8 -> 4 3/8.
|
a****n 发帖数: 4734 | 6 I said: using overgrip to replace replacement grip. and 但是没办法减两号
For sure it will affect the weight and ballance a little bit.
【在 K****D 的大作中提到】 : One overgrip is only 半号 and it weighs 5-6g.
|
K****D 发帖数: 30533 | 7 I was trying to point out that you need 4 overgrips to make a
4 3/8 into 4 5/8. That's not a "little bit" change in weight
and balance.
【在 a****n 的大作中提到】 : I said: using overgrip to replace replacement grip. and 但是没办法减两号 : For sure it will affect the weight and ballance a little bit.
|
d******n 发帖数: 12850 | 8 did you get his question?
【在 K****D 的大作中提到】 : I was trying to point out that you need 4 overgrips to make a : 4 3/8 into 4 5/8. That's not a "little bit" change in weight : and balance.
|
K****D 发帖数: 30533 | 9 Yes as proven in the following post:
http://www.mitbbs.com/article/Tennis/31416691_0.html
【在 d******n 的大作中提到】 : did you get his question?
|
d******n 发帖数: 12850 | 10 i see. to be less confusing, you should have explained that in the reverse
way, 5/8->3/8. hehe
【在 K****D 的大作中提到】 : Yes as proven in the following post: : http://www.mitbbs.com/article/Tennis/31416691_0.html
|
v***s 发帖数: 1893 | 11 yes, you can
go homedepot/lowes and find small wood planer around $5-10
【在 m**x 的大作中提到】 : 变大很容易,能变小吗 : 想是从4 5/8 -> 4 3/8.
|
K****D 发帖数: 30533 | 12 haha, 看来还是手大好啊,偶现在4 1/4 到 4 5/8 通吃。
【在 v***s 的大作中提到】 : yes, you can : go homedepot/lowes and find small wood planer around $5-10
|
w******4 发帖数: 22 | 13 我几个月前刚把我的拍子从43/4减小到45/8左右,其实很简单,去homedepot买一个
file(见图),回来后在拍柄八个平面上均匀地挫,保持每个平面挫的次数相当直到满
意的尺寸为止。
http://www.amazon.com/Nicholson-21862-8-Inch-Bastard-without/dp/B00002N5M9/ref=sr_1_6?s=industrial&ie=UTF8&qid=1281654374&sr=1-6
【在 m**x 的大作中提到】 : 变大很容易,能变小吗 : 想是从4 5/8 -> 4 3/8.
|