l****n
发帖数: 12 | 1 sun SPARCstation 20
开机后出现的现象如下：
SPARCstation 20(1×390z55),keyboard present
ROM Rev.2.22, 64MB Memory installed,Seial #10482275
Ethernet address 21:77:14:89:b3:b7,Host ID:ad9ff263
The IDProm contents are invalid
Boot device:/iommu/sbus/espdma@f,400000/esp@f,800000/sd@3,0
File and args:
warning IDProm checksum error
warning IDProm checksum error
using default machine type Sun4m/60
Copyright(c) 1983-1994,Sun Microsystems,Inc.
Invalid format code in IDProm
Configuring network interfaces:le0
.
.
.
而且 | s*a
发帖数: 33 | 2 Check out this page:
http://www.squirrel.com/squirrel/sun-nvram-hostid.faq.html
is it relavent?
【在 l****n 的大作中提到】
: sun SPARCstation 20
: 开机后出现的现象如下：
: SPARCstation 20(1×390z55),keyboard present
: ROM Rev.2.22, 64MB Memory installed,Seial #10482275
: Ethernet address 21:77:14:89:b3:b7,Host ID:ad9ff263
: The IDProm contents are invalid
: Boot device:/iommu/sbus/espdma@f,400000/esp@f,800000/sd@3,0
: File and args:
: warning IDProm checksum error
: warning IDProm checksum error
| j***y
发帖数: 87 | 3 In some machines, the IP address in the EPROM is different with the IP address
of the OS. the one in the EPROM may be incorrect according to your subnet.
So when you test it, you will have a different result before or
after starting the machine.
But you can change the IP address in the EPROM to the same as what you are
supposed to use.
【在 l****n 的大作中提到】
: sun SPARCstation 20
: 开机后出现的现象如下：
: SPARCstation 20(1×390z55),keyboard present
: ROM Rev.2.22, 64MB Memory installed,Seial #10482275
: Ethernet address 21:77:14:89:b3:b7,Host ID:ad9ff263
: The IDProm contents are invalid
: Boot device:/iommu/sbus/espdma@f,400000/esp@f,800000/sd@3,0
: File and args:
: warning IDProm checksum error
: warning IDProm checksum error
|
|
