l*****o
发帖数: 11 | 1 used hp Usb utility to format a bootable usb stick. and then copied himem.
sys, smartdrv, config.sys to enable smartdrv
copied I386 from xp (w/ sp2) CD to the usb
boot from usb and run smartdrv, enter i386 and run winnt
up till here, everything is fine
then the setup is preparing.. choose the C partition and format it and then
setup is coping the files into it.
at the end, it restart and enter the setup again, this is time, it still ask
to choose partition and if i choose C, it says it aleady ha | r****y
发帖数: 26819 | 2 重启的时候应该把usb拔掉吧，继续安装应该不会再分区吧。
then
ask
it.
【在 l*****o 的大作中提到】
: used hp Usb utility to format a bootable usb stick. and then copied himem.
: sys, smartdrv, config.sys to enable smartdrv
: copied I386 from xp (w/ sp2) CD to the usb
: boot from usb and run smartdrv, enter i386 and run winnt
: up till here, everything is fine
: then the setup is preparing.. choose the C partition and format it and then
: setup is coping the files into it.
: at the end, it restart and enter the setup again, this is time, it still ask
: to choose partition and if i choose C, it says it aleady ha
|
|
