H***7 发帖数: 321 | 1 大家都是自己换机油吗?
到不是舍不得那点钱,刚让老墨换的机油,隔天就漏。 不知道对我的宝贝车怎么弄的。
请兄弟姐妹指教~~ |
A*****s 发帖数: 13748 | 2 自己换
的。
【在 H***7 的大作中提到】 : 大家都是自己换机油吗? : 到不是舍不得那点钱,刚让老墨换的机油,隔天就漏。 不知道对我的宝贝车怎么弄的。 : 请兄弟姐妹指教~~
|
f********m 发帖数: 8397 | 3 you should DIY once at least. then you know what to look while asking
other to do it.
的。
【在 H***7 的大作中提到】 : 大家都是自己换机油吗? : 到不是舍不得那点钱,刚让老墨换的机油,隔天就漏。 不知道对我的宝贝车怎么弄的。 : 请兄弟姐妹指教~~
|
A*****s 发帖数: 13748 | 4 DIY过一次了就不会再找人搞了 :)
【在 f********m 的大作中提到】 : you should DIY once at least. then you know what to look while asking : other to do it. : : 的。
|
K****o 发帖数: 2183 | 5 DIY最痛苦的就是处理旧油了吧,还有清洗脏油盆。。。
【在 A*****s 的大作中提到】 : DIY过一次了就不会再找人搞了 :)
|
A*****s 发帖数: 13748 | 6 旧油装在牛奶桶里拿去AAP倒了不就是了?
油盆我是从来不洗的,包起来扔在那,洗他干嘛?
【在 K****o 的大作中提到】 : DIY最痛苦的就是处理旧油了吧,还有清洗脏油盆。。。
|
f********m 发帖数: 8397 | 7 jacking up the car, crawling under the car, safety...
【在 K****o 的大作中提到】 : DIY最痛苦的就是处理旧油了吧,还有清洗脏油盆。。。
|
K******S 发帖数: 10109 | 8 not really, for non-synthetic oil change, dealer only charge 25-35 bucks,
drop the car in the morning, grab coffee and donuts, shuttle to office, pick
up the car in the afternoon. no mess, no safety issue,
【在 A*****s 的大作中提到】 : DIY过一次了就不会再找人搞了 :)
|
p**q 发帖数: 1130 | 9 今天一同学的车漏油
告诉我说是在沃尔玛换的oil和oil filter
结果一看,
oil filter根本就没拧紧,又拧了n圈才到头,n约等于3.5
晕 |
K****o 发帖数: 2183 | 10 in here, a chinese shop charges $10 if u bring ur own oil and filter, they
do the job in 15min and let u watch, they dont care...
sometimes i just can't justify DIY oil change...the only benefit seems to be
self satisfaction, haha
pick
【在 K******S 的大作中提到】 : not really, for non-synthetic oil change, dealer only charge 25-35 bucks, : drop the car in the morning, grab coffee and donuts, shuttle to office, pick : up the car in the afternoon. no mess, no safety issue,
|
|
|
p**s 发帖数: 408 | 11 sometimes dealer, sometimes DIY. If your oil filter is on top, check this
one out, http://www.mityvac.com/pages/products_fee.asp
的。
【在 H***7 的大作中提到】 : 大家都是自己换机油吗? : 到不是舍不得那点钱,刚让老墨换的机油,隔天就漏。 不知道对我的宝贝车怎么弄的。 : 请兄弟姐妹指教~~
|
A*****s 发帖数: 13748 | 12 this is so damn cool~~~
【在 p**s 的大作中提到】 : sometimes dealer, sometimes DIY. If your oil filter is on top, check this : one out, http://www.mityvac.com/pages/products_fee.asp : : 的。
|
A*****s 发帖数: 13748 | 13 is this one good?
http://www.amazon.com/Northern-Tool-and-Equipment-Liquivac/dp/B0000AXBO5/
much cheaper
does the job
though not fancy
【在 p**s 的大作中提到】 : sometimes dealer, sometimes DIY. If your oil filter is on top, check this : one out, http://www.mityvac.com/pages/products_fee.asp : : 的。
|
H***7 发帖数: 321 | 14 大部分都自己换啊? 好,我也来学习学习。
还有,谢谢大家踊跃发言*^^* |
L*A 发帖数: 756 | 15 再加$10小费还可以lubricate swing bar bushing.
be
【在 K****o 的大作中提到】 : in here, a chinese shop charges $10 if u bring ur own oil and filter, they : do the job in 15min and let u watch, they dont care... : sometimes i just can't justify DIY oil change...the only benefit seems to be : self satisfaction, haha : : pick
|
m*****g 发帖数: 691 | 16 不值得
【在 H***7 的大作中提到】 : 大部分都自己换啊? 好,我也来学习学习。 : 还有,谢谢大家踊跃发言*^^*
|