f****s
发帖数: 5631 | 1 家里的打印机（brother 2170w)显示toner 用光了，我在newegg上新买的TN 360 toner
，换上之后还是显示toner 用光了。用了black tape 覆盖光空什么的trick也不行。
请问有什么解决方法了，thanks. |
e*****3
发帖数: 541 | 2 Try this procedure as mentioned.if any mistake in trying the procedure then
retry from first step again.so read it carefully and try it. Brother ML-2040
Toner Light Reset
When replacing the toner cartridge in the Brother HL-2040 with a new
cartridge (compatible or remanufactured) the user may experience a problem
with the toner light staying on, even with the new toner installed. The
procedure below has worked for many folks, so give it a shot.
Open the front cover of the Brother HL-2040 and leave open while completing
the following steps:
1.) Turn the printer off.
2.) Hold the button while turning the printer on. All panel lights should be
on.
3.) Release the button once all lights are off.
4. )Press the button 2 times.
5.) Pause.
6.) Press the button 5 times.
7.) The toner light should be off.
8.) The paper light should be on.
9.) Close cover. The ready light should be the only light on.
Once all steps are successfully completed your â |
f****s
发帖数: 5631 | 3 2个包子奉上，谢了。
then
2040
completing
【在 e*****3 的大作中提到】
: Try this procedure as mentioned.if any mistake in trying the procedure then
: retry from first step again.so read it carefully and try it. Brother ML-2040
: Toner Light Reset
: When replacing the toner cartridge in the Brother HL-2040 with a new
: cartridge (compatible or remanufactured) the user may experience a problem
: with the toner light staying on, even with the new toner installed. The
: procedure below has worked for many folks, so give it a shot.
: Open the front cover of the Brother HL-2040 and leave open while completing
: the following steps:
: 1.) Turn the printer off.
|
b***6
发帖数: 6011 | |
l******t
发帖数: 12659 | 5 try it
i approve this message
【在 b***6 的大作中提到】
: 管用吗
|
