t*****n 发帖数: 6 | 1 遇到一个简单的控制问题请教大家,一个温度控制系统,请看附件,需要设计一个PID控制
器,有没有同学有现成的例子,包括建模,和设计。主要一个问题,不知道如何处理
heat loss 那个干扰输入。
这个一个很典型的问题,不知道到哪找个例子。谢谢指点。 |
l***g 发帖数: 1035 | 2 simulink demo
【在 t*****n 的大作中提到】 : 遇到一个简单的控制问题请教大家,一个温度控制系统,请看附件,需要设计一个PID控制 : 器,有没有同学有现成的例子,包括建模,和设计。主要一个问题,不知道如何处理 : heat loss 那个干扰输入。 : 这个一个很典型的问题,不知道到哪找个例子。谢谢指点。
|
t*****n 发帖数: 6 | 3 thanks a lot, can you give me more detailed information. Not quite familiar
with simulink too much. Thanks again.
【在 l***g 的大作中提到】 : simulink demo
|
c*******l 发帖数: 4801 | 4 看着很简单。网上有些例子,google一个吧
【在 t*****n 的大作中提到】 : 遇到一个简单的控制问题请教大家,一个温度控制系统,请看附件,需要设计一个PID控制 : 器,有没有同学有现成的例子,包括建模,和设计。主要一个问题,不知道如何处理 : heat loss 那个干扰输入。 : 这个一个很典型的问题,不知道到哪找个例子。谢谢指点。
|
a****l 发帖数: 8211 | 5 super simple typical PID. Just make sure you tune "I" well.
【在 t*****n 的大作中提到】 : 遇到一个简单的控制问题请教大家,一个温度控制系统,请看附件,需要设计一个PID控制 : 器,有没有同学有现成的例子,包括建模,和设计。主要一个问题,不知道如何处理 : heat loss 那个干扰输入。 : 这个一个很典型的问题,不知道到哪找个例子。谢谢指点。
|
l***g 发帖数: 1035 | 6 http://www.mathworks.com/products/simulink/demos.html?file=/products/demos/s
hipping/simulink/sldemo_househeat_script.html
if you have matlab and simulink, follow the instruction. otherwise click on
the figure in the link to open a java based illustration.
hth
familiar
【在 t*****n 的大作中提到】 : thanks a lot, can you give me more detailed information. Not quite familiar : with simulink too much. Thanks again.
|
W***n 发帖数: 11530 | 7 You need a physical model (for the heater and heat load) to tune the PID
controller. With data, the PI part is fairly easy to tune. You need to tweat
the D term to match the capacity of the heater and heat loss disturbance. |
g****t 发帖数: 31659 | 8 这个东西和负载有关。
所以建模和pid调节需要循环进行,是个花时间堆结果的过程。
一套参数本来工作的很好,屋子里头放一块冰或者放一块铁,也许控制器就不能工作了。
You need a physical model (for the heater and heat load) to tune the PID
controller. With data, the PI part is fairly easy to tune. You need to tweat
the D term to match the capacity of the heater and heat loss disturbance.
【在 W***n 的大作中提到】 : You need a physical model (for the heater and heat load) to tune the PID : controller. With data, the PI part is fairly easy to tune. You need to tweat : the D term to match the capacity of the heater and heat loss disturbance.
|
W***n 发帖数: 11530 | 9 The performance can be greatly increased by feeding back directly the heat
loss signal to the controller... |