JobHunting版 - hardware engineer in northern virginia (转载) |
|---|
|
|
|
|
|
|
g****e
发帖数: 141 | 1 plz send resume to g****[email protected]
thanks
【 以下文字转载自 JobMarket 讨论区 】
发信人: gstide (豆腐脑), 信区: JobMarket
标 题: hardware engineer in northern virginia
发信站: BBS 未名空间站 (Mon Jun 20 18:53:13 2011, 美东)
职位1：senior level
Key Job Responsibilities include:
•Active participant in high level architecture design
•Clear and concise documentation to support all facets of the design
•Design and develop digital hardware with a focus on microprocessor
and FPGA platforms
•Mentor other engineers and technicians to assist throughout the
development phase including the hardware testing and debug phase
•Implementing the design using schematic capture software tools which
include generating net lists, parts lists and preparation for printed
circuit board layout
•Active participant in the design layout phase with strong guidance in
all areas including component placement and trace routing
•Hands on experience in the lab for debugging and testing all parts of
the digital design
•Provide assistance and training to the necessary staff for support
and manufacturing
Qualifications
Education:
•BS in Electrical Engineering or closely related field from an
accredited University/College
•MS Electrical Engineering preferred
Experience: This is a senior digital hardware engineering position and
requires experience in the following areas:
•Experience with satellite networks
•Experience in high speed digital design (embedded processor, DDR2,
PCIe, Gigabit ethernet, USB, FPGA)
•Strong experience in switching power supply design (DC/DC converters)
•Experience with schematic capture software (ORCAD/DXDesigner)
•Expert knowledge of signal integrity and EMI/EMC issues – experience
with signal integrity software (Hyperlynx)
•DFx (Design for cost, test, manufacturing) expertise
•Practical experience in the use of test equipment (DSO, Logic
Analyzer, FRA, etc.)
•Experience in CPLD design and the associated tools
•Experience in hybrid RF/Digital PCB board layout
•Extensive familiarity with electronics manufacturing process –
volume production, process and quality controls, RMAs, etc.
•Experience developing and maintaining comprehensive test plans
•Familiarity with IP Networking protocols and standards
•Scripting (VB, C#, Perl, Tcl/Tk, Python, Ruby) for the purpose of
test automation would be an asset
•Strong verbal and written communications skills
•Experience with Stage Gate product development methodologies
职位2：Component Engineer
KEY JOB RESPONSIBILITIES:
•Collaborate with mechanical, electronic and RF design engineers
during component selection process.
•Review BOMs and take responsibility for areas of opportunity and risk
. Proactively and effectively report on progress to all interested
parties.
•Identify equivalents to existing parts as a response to urgent
shortage situations or routine Component Engineering best practice.
Review
deviation requests, component engineering requests, problem reports,
etc.
and assure that proposed part replacements can satisfy the existing
design
requirements.
•Support design engineers, operations personnel and contract
manufacturers with supplier management, material planning, purchasing,
production test, and other component issues.
•Insure parts and processes used meet RoHS, WEEE, Export and other
environmental standards.
•Work with vendors and plan for component end of life.
•Develop and execute on qualification (including lab testing) of
alternate components - troubleshoot as needed.
•Coordinate failure analysis and root cause/corrective actions with
internal and vendor teams.
•Participate in sustaining engineering activities.
•Assist with maintaining eCAD Libraries and Databases.
•Other duties as assigned.
REQUIRED EXPERIENCE:
Education: BS in a technical discipline (preferably Electrical
Engineering)
or closely related field from an accredited University/College.
Experience: This is a hardware engineering position and requires course
work
or related work experience in the following areas:
•Strong knowledge of electronic manufacturers and distribution (Who
makes what" Who sells what")
•Can read and understand electrical schematics, mechanical drawings,
and component data sheets.
•Familiarity with industry standards and qualification plans for
electronic components. Have demonstrative experience of improving unit
robustness and life expectancy through a working knowledge of component
reliability, their applications and good design practices
•Strong appreciation of component lifecycle and associated risks
•Has performed failure analysis and root cause/corrective actions with
internal and vendor teams. Experience in dealing with external labs.
•Experience in MySQL and scripting language
•Expert in Microsoft Excel
•Experience with Agile PLM Professional Qualities:
•Has a can do attitude - willing to dive into and take ownership of
critical availability issues
•Eager to work in a fast paced development environment • Ability
to multitask between multiple projects
•Must be able to analyze and solve technical problems
•Must have strong interpersonal skills and be self-motivated
•Completes tasks in a timely manner
•Communicates effectively on a technical level
•Can work under pressure in high visibility situations
•Flexible – able to quickly adapt to changing conditions and make
decisions based on incomplete data
•Must be effective as a single contributor or as a team member as the
situation warrants
职位3：firmware Engineer
KEY JOB RESPONSIBILITIES:
•Develop FPGA firmware using Verilog for continuous and burst mode
satellite earth station modems with a strong emphasis on DSP (Digital
Signal
Processing) and cost effective implementations.
•Create and maintain comprehensive test bench modules to ensure a high
degree of code coverage and proper functionality of firmware modules.
•Use efficient lab techniques (e.g. Signal Tap, Chip Scope, custom
scripting and automation) to integrate modules and troubleshoot
problems.
•Make use of test vectors generated by system level simulations (
Matlab, Simulink, etc) to ensure bit-accurate implementation firmware
structures.
•Work in close collaboration with firmware, hardware, and software
engineers throughout the integration process to ensure that FPGA designs
are
correctly implemented.
•Actively maintain expertise and an awareness of the state of the art
in wireless modem implementation technologies such as FPGAs, DSP
processors,
and soft processors embedded within FPGAs (e.g. Altera NIOS and Xilinx
MicroBlaze).
•Other duties as assigned.
Education:
•MS in Electrical Engineering
Experience:
•At least two years of experience in wireless communications
development with several of the following:
•Experience with volume-production quality FPGA designs where
optimization for area and speed is of critical importance.
•Experience with hands-on lab debugging and test of wireless
communications equipment.
•Strong mathematical analysis and modeling skills in fixed point DSP
algorithms.
•Experience with TDMA, FDMA, and CDMA modems.
•Experience with RF and Analog Hardware.
•Experience with embedded Linux platforms.
•Experience with Xilinx Virtex family or Altera Cyclone and Stratix
family of FPGAs.
•Verilog experience using Quartus or Xilinx design software
•Knowledge of IP networking protocols.
•Strong verbal and written communications skills.
职位4：Senior FPGA Engineer
We are seeking a motivated individual with a strong interest in digital
systems. The principal job responsibility of this position is the
development of advanced FPGA designs which perform data processing and
control in satellite modems. The Senior FPGA Engineer will be
responsible
for defining high-level FPGA architectures, implementing the designs
using
HDL, and verifying the designs through simulation and laboratory test.
Education:
•BS in Electrical Engineering, Computer Engineering, Computer Science,
or a closely related field from an accredited University/College
•MS in Electrical Engineering or Computer Engineering is preferred
Experience: A candidate must have experience in the following:
•8+ years of digital design experience
•Strong experience in using Verilog or VHDL to design digital logic
circuits. System Verilog experience is a plus.
•Power user of Modelsim simulator.
•Experience with Xilinx ISE or Altera Quartus FPGA design tools.
•Experience working in a laboratory environment and using digital
oscilloscopes and logic analyzers
•Coursework or experience in digital signal processing is a plus
职位5： Principal Microwave Design Engineer
We are seeking an innovative, creative and experienced Principal
Microwave
Design Engineer who is ready for the challenges, responsibilities, and
rewards that come with working in a high-energy, fast-paced environment.
dedicated to providing next generation solutions for
mobile broadband IP networking via satellite networks. As the leading
innovators in this new space, our diverse and talented team of Internet,
satellite and telecommunications professionals continues to break new
ground
and create significant opportunities for network operators, for service
providers and resellers, and for corporate networking professionals. The
Principal Hardware Engineer works within Engineering. This role is
responsible for the design, development, and documentation of
comprehensive
RF/Microwave designs from concept thru completion.
Key Job Responsibilities:
•Coordinate and participate in VSAT Outdoor-Unit (ODU) product
development activities.
•Support Product Marketing in specifying and qualifying ODUs
•Support architectural designs and system engineering/tradeoffs.
•Support Global Supply Chain on sourcing requirement
•Perform/support lab testing and troubleshooting
•Participate in system-level design meetings in order to address
design issues early in the product development process
•Provide training and support as required to other staffs
•Overseas travel minimum of 4 times per year
•Strong verbal and written communications skills.
•Other duties as assigned.
Education:
•BS in Electrical Engineering or closely related field from an
accredited University/College
•MS Electrical Engineering preferred
Experience:
This is a hardware engineering position and requires some course work or
related work experience in some of the following areas.
职位6：Hardware Quality Assurance Engineer
This is an excellent opportunity to join a fast growing, entrepreneurial
company in the satellite communications business. The company is
headquartered in the U.S. and operates globally with sales, engineering
teams, customers, and manufacturing partners located around the world.
The Hardware Quality Assurance Engineer analyzes the product and process
quality and overall fitness of products (hardware and software) and
through
a combination of hands-on technical work and analysis of data. This role
will interface directly with global contract manufacturing sites,
design,
manufacturing, test engineering, global technical support (TAC) and IT
to
effectively improve product and process quality and business processes.
The
Hardware Quality Assurance Engineer will help ensure that industry best
practices, such as Six Sigma, Lean, and 8D Corrective Actions are
designed
into processes and systems, and participate in the New Product
Introduction (NPI) process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
•Interface effectively with contract manufacturers, lead weekly
meetings, RMA disposition and drive issues towards resolution
•Lead 8D Corrective Actions and Quality Issue investigations by
interfacing with internal engineering, technical support groups and
suppliers using the Agile system.
•Drive process and product continual improvement by utilizing Lean Six
Sigma methods (value stream mapping, process mapping, kanban, 5S,
kaizen,
variation reduction, FMEA, Capability studies)
•Perform gage R&R and fixture validation analysis as part of tester
qualification and yield drop issues
•Provide reliability and maintainability calculations on components,
products and systems
•Conduct data analysis on internal and external data and provide
insight to Global Supply Chain stakeholders as part of strategic
initiatives
•Lead MRB efforts on product and process portfolio coordinating
activities with teams and contract manufacturers
•Perform internal auditing for TL9000 and other compliance
requirements
•Assist with writing and maintaining internal process documentation to
meet our ISO 9001/TL 9000 and NPI requirements.
•Perform technical out of box audits and source audits at CM sites on
product to ensure quality of product in the field.
REQUIRED SKILLS AND EXPERIENCE:
•Bachelors Degree in Electrical Engineering or equivalent
•Two(2) to five(5) years of work experience in hi-tech industry and/or
contract manufacturing
•Six sigma green belt or black belt training is a plus
•Excellent communication skills – verbal and written
•Ability to handle multiple projects with changing priorities in a
fast-paced hi-tech environment with minimum supervision
•Must have excellent skills with MS Excel , Minitab or other
statistical software packages.
•Must have hands-on experience with electronics' test equipment (multi
-meters, spectrum analyzers, power meters). |
|
|
|
|
|
|
|
