L****r
发帖数: 77 | 1 本身做传热流体方向，想下半年转到FEA方向上
研究生上过FEA的课以及一些力学课程，做过一些FEA course project，基本概念还是有
的，不过所学不深入，需要重新refresh一下
不知道自学教材加上熟悉一些软件（ANSYS）之类的有没有机会？
能不能推荐FEA教材以及一般工业界那种软件用的多？ |
r********o
发帖数: 1423 | 2 如果你的目的是应用而非给fea软件公司写程序的话，有cook那本书就够了，FEA是种技
能，很多是在实践中学的。
是有
【在 L****r 的大作中提到】
: 本身做传热流体方向，想下半年转到FEA方向上
: 研究生上过FEA的课以及一些力学课程，做过一些FEA course project，基本概念还是有
: 的，不过所学不深入，需要重新refresh一下
: 不知道自学教材加上熟悉一些软件（ANSYS）之类的有没有机会？
: 能不能推荐FEA教材以及一般工业界那种软件用的多？
|
c********a
发帖数: 2829 | 3 There are several books by Robert Cook, like
Concepts and Applications of Finite Element Analysis
Finite Element Modeling for Stress Analysis
which one are you talking about?
I would recommend:
A First Course in the Finite Element Method
buy earlier edition on Amazon to save money.
This book is easy to follow, good for self study. I once took a course using
this as textbook, later found that the professor was just copying the steps
in the book to the white board.
【在 r********o 的大作中提到】
: 如果你的目的是应用而非给fea软件公司写程序的话，有cook那本书就够了，FEA是种技
: 能，很多是在实践中学的。
:
: 是有
|
c********t
发帖数: 2276 | 4 应该是第一本。其实我觉得那本一般
using
steps
【在 c********a 的大作中提到】
: There are several books by Robert Cook, like
: Concepts and Applications of Finite Element Analysis
: Finite Element Modeling for Stress Analysis
: which one are you talking about?
: I would recommend:
: A First Course in the Finite Element Method
: buy earlier edition on Amazon to save money.
: This book is easy to follow, good for self study. I once took a course using
: this as textbook, later found that the professor was just copying the steps
: in the book to the white board.
|
