D**0
发帖数: 2048 | 1 发信人: azurelan (azure), 信区: SanFrancisco
标 题: 【JOBS】NCG CAD Engineer
发信站: BBS 未名空间站 (Mon Dec 6 20:07:46 2010, 美东)
In this position, the individual will be responsible for developing/
supporting physical verification rule decks (LVS/DRC/ERC) for the layout
group, completing placement and routing flow/methodology development,
developing/supporting/calibrating parasitic extraction flow for design
groups, developing the CAD flow for memory design as per the layout and
designing requirements and imp... 阅读全帖 |
|
a******n
发帖数: 55 | 2 n this position, the individual will be responsible for developing/
supporting physical verification rule decks (LVS/DRC/ERC) for the layout
group, completing placement and routing flow/methodology development,
developing/supporting/calibrating parasitic extraction flow for design
groups, developing the CAD flow for memory design as per the layout and
designing requirements and improving overall productivity for layout group
through various scripts and SKILL programming. The individual will also... 阅读全帖 |
|
A*******s
发帖数: 23 | 3 send resume to a****************[email protected]
[Apple openings] Hardware Systems Integration Engineer/Hardware Design
Engineer
Hardware Systems Integration Engineer
Sr. HW Systems Integration Engineer
Hardware Systems Integration Engineer
Hardware Systems Integration Engineer
Hardware Systems Integration Engineer
Hardware Design Engineer
Hardware System Integrator
Hardware Systems Integration Engineer
Hardware System Integrator
Hardware Systems Integration Engineer
Job Number: 26059622S... 阅读全帖 |
|
s*****o
发帖数: 557 | 4 傍晚，新泽西某河入海口，12尺FMA，3~5 oz rating。
7+1 guides layout/ new concept 25, 20,16, 16，12，12，12+ 12-8
杆子bend是mod-fast，恢复fast，butt的直径是1/2英寸，tip的直径是8号，属于超轻
质杆，比FMJ轻不少，接近C2，一般杆子的如果是mod action，恢复必定是mod，
Century这款不错，和C2一样，杆子复位迅速，属于long range的杆子。
测试结果略有些遗憾，1.5盎司bucktail加猪皮，最远投掷距离65米，大约72码；2盎司
bucktail加猪皮，最远投掷距离是75米，大约82码，因为bucktail加猪皮是东岸surf
fishing的基本功，所以就没测别的。
贴video请同志们观看，留意杆子投掷后的复位，基本没有反向颤音，Century的质感技
术还是很不错。
总结的经验，或者说希望能得到的下一个测试是traditional layout，计划collector
用40JL，做一根FMJ看看，过几周再来report距离是否有提高，这个距离基本是目前2... 阅读全帖 |
|
KV
发帖数: 5728 | 5 六年前的一个春天，bass神秘地介绍了PI，从那时，国内太平洋黄海岸边大风大浪钓
surf的感觉回来了，那年秋季，和bass去了梦涛客，在与老鲨鱼远投中输掉比赛，也是
那年，认识了striper断杆等诸多梦涛客surf好汉们。
用了两年时间，在梦涛客远投中赢了回来，之后用了好几年，不停地希望2盎司的
bucktail+猪皮能够过顶投掷，达到90码开外。去年和副院长用钟摆投掷，曾神奇一扔
，扔过100米约110码的最高纪录，但大石头上，90码已经属于梦想。
自己制作远投竿以来，研究了不少blanks的细节和guides layout的细节，网上的很多
说法很矛盾，COF，NGC，KR等众说纷纭，结论是只能靠自己去摸索，包括reduction的
数量，running的数量，各环节rings的大小，layout，位置，包括材料，guides的形状
，大小，重量，环的强度及metal的强度对比，以及和blank的相互作用等。
今天傍晚，上周日完工的第三根blank，第一次过顶轻松投过90码，最高纪录大约105码
，3+25x3+10+8=96米，大约105码，过顶投掷。这个2盎司bucktai... 阅读全帖 |
|
g**********g
发帖数: 18118 | 6 Next Sunday December 8 2013 will be a FLICKR BLACK DAY in order to protest
against the upcoming change that everyone will soon be forced to accept (
unless we leave ...)
If you wish to join the protest against this awful new Flickr layout ,you
can
Download this image from
-- here www.flickr.com/photos/anujnair/11166980463/
--or here www.flickr.com/photos/110293295@N04/11147629795/
Thank you Anuj Nair
-- You may also download from my own stream because I've applied a Creative
Commons license to i... 阅读全帖 |
|
a***e
发帖数: 27968 | 7 你说的这个在90nm往上基本属实
现在不是这样的了，哪是DRC rule那么简单
layout现在对yield的影响是致命的，
高性能的chip根本不是什么DRC注意一下就行的
当然你也可以把面积搞大点减少layout上的限制
但是这个对成本性能都是负面影响
好的layout是好的设计的核心部分
这个不小心你的critical path都废了，就不要提性能了 |
|
q**1
发帖数: 193 | 8 你要的template是不是像word文档里面的template，每个文件都在这些自动生成的
template的基础上写。。这个应该只能做静态的HTML文件吧。。
我现在用的工具比较爽，网站所有文件都可以自动继承一个layout（缺省放在根目录的
一个文件），每个子目录下还可以做单独设置（用一个同名文件），可以是在上级目录
的基础上添加新的公用元素，可以只局部继承上级目录，或者完全开始个新的layout。
所有公用元素都不必出现在其他HTML文档中，所以极大地减少了HTML code的维护量。
。。。。
不过估计你说的template和我想的完全不是一回事，呵呵。。
whatsoever，像这种template，layout wrapper的东西用 Perl 和 vim 绰绰有余，除
了要做些fancy的外表，那就不是我熟悉的了。。 |
|
l*****z
发帖数: 6024 | 9
那个其实挺坑爹的，就是占了个layout的便宜，适合随身携带，但蛋疼的是既然搞成这
样layout了就好好弄，结果现在这个layout其实码农也不待见。pcb都不是平的。。。
感觉kbc/ducky其实是有一定粉丝效应在里头的。 |
|
c******f
发帖数: 2622 | 10 【 以下文字转载自 PDA 讨论区 】
发信人: coolwulf (coolwulf), 信区: PDA
标 题: 关于 Opera 是怎么死掉的，大家可以读读这篇 Opera 一个未署名员工的文章
发信站: BBS 未名空间站 (Mon Feb 22 15:15:51 2016, 美东)
by Anonymous Coward on Tuesday June 24, 2014 @12:53AM (#47303521)
(Disclaimer: I'm an ex-Opera employee; pretty much all of what's below has
been said by others before or can easily be inferred from it.)
Opera ceased selling a web browser to consumer years ago. Opera, having been
ad-free for around nine years, with the exception of a couple of quarte... 阅读全帖 |
|
k***r
发帖数: 4260 | 11 layout那个没有仔细看，不清楚为什么要用external layout，估计是ZK自己的Layout
没有那么灵活。Grid那个有side by side comparison。ZK自己的功能弱。其实如果这
个现象很普遍，还不如索性支持ExtJS好了，毕竟ExtJS或者YUI在界面上花很多时间，
应该做得好一些。ZK自己的东西差一点，还不如focus在后面。 |
|
k****u
发帖数: 133 | 12 To be more precise, declarative languages like XML/HTML is the best choice
for UI layout, as how people used to design/layout HTML pages. But there
still needs to be some bindings from XML elements to Java UI components so
that we can add UI logic, event handling, remoting, etc to the UI components
. That's exactly how Flex programming model works (MXML for layout and
ActionScript3 for programming components) and GWT obviously is going under
the same route. |
|
t*******e
发帖数: 684 | 13 Comparing the 3 web technologies, I have an interesting finding.
JSF has page layout, and component trees (in the form of JSF tags) both
declared in XHTML files.
Wicket maintains page layout in HTML, while component trees are defined in
Java classes. Component IDs in Java classes and the HTML placeholders have
to match.
Vaadin have both page layout and component trees defined in Java.
Obviously, Vaadin resembles SWING, in the sense that it is ajax event
driven, hides the HTML native code and req |
|
f*****0
发帖数: 166 | 14 感谢指点。 这个确实是我Google到的最初的解释。
我现想确认的是如你所说的是不是一个比较普适的模式：
两个模块物：
（Object 1） gui（包含可serializable 的layout）。
(Object 2) 数据。
save时保存两个objects,load时再load两个objects. (相对于我一开始的直接把数据逻
辑放到JDialog的做法）
还有一个问题，关于layout，如果要能够serialize，又比较好用，类似于客户信息表
栏比较多，相对分散，什么layout比较好？我看到了GridBagLayout.不知道对否？
JDialog |
|
n********r
发帖数: 65 | 15 【 以下文字转载自 Linux 讨论区 】
发信人: neodreamer (aladdin), 信区: Linux
标 题: 一个c++问题
发信站: BBS 未名空间站 (Tue Apr 17 21:57:53 2007)
c++ 类在内存中的layout什么时候和
一个包含这个类中所有数据成员的struct是一样的？
网上看了点不是很懂，好像是有vitual function的时候就不一样了
下面这个是我google搜到的
>t******[email protected] (Theodore Omtzigt - MAP-Folsom) writes:
>
> After walking the heap to reverse engineer the memory layout
> of a class in MFC, I figured this forum might provide a better
> answer. How does a C++ compiler build the memory layout of a class
> and a derived |
|
c**t
发帖数: 2744 | 16 还是Dameware牛，检测到键盘的layout的不同，原来一不小心，Remote PC的layout是
unite states - Dvorak，本地机是标准的US layout，所以键盘全乱掉了。 |
|
|
S****n
发帖数: 46 | 18 You can also specify media positions relatively to the window's
dimensions. For example, if you wish to display the vim icon at 50% from the
left border and at 40% from the top border, modify the previous source and
replace the left and top attributes.
background-color="white" />
width="32" height="32" />
 S****n
发帖数: 46 | | |
|
N*******1
发帖数: 44 | 20 Please contact Katrine Winer , if you would like to
apply for this position.
We need a Civil Engineer Project Manager with Federal, State, and Local
project experience.
Recruiter notes - Search For: Civil Engineering, design, layout, geometry,
grading, stormwater
management, sediment and erosion control, utilities (water, sewer, storm
drains).
Position Title Project Manager - Civil Engineer - MD #1819
Salary Range Based On Qualifications (at least $40... 阅读全帖 |
|
l***e
发帖数: 421 | 21 Sorry I've no Chinese input now.
Major revison is not bad, very possible can be accepted if you stress the
reviewer's concern.
If no time to fab, you can find some excuses first, e.g, the time schedule
is pretty tight and the funding is not enough. In addition, maybe it is
helpful that you give a layout graph in the paper, and provide the post-
layout simulation results. You can also tell the reviewer during the post-
layout simulation, all the parasitic resistance, capacitance and inductance
of |
|
w*****n
发帖数: 27 | 22 在用calibre run lvs时，要求在inputs的layout tab中载入layout netlist file，我
不知道这个是从哪产生的？我现在已经有了gds的文件了，这个与layout netlist文件
是什么关系呢？ |
|
r*********i
发帖数: 67 | 23 就是布线吧。你是去做布线自动化软件的公司呢还是IC器件制造商还是电路板设计公司
？如果是第一样，就是象上面兄弟说的。第二个，就是VLSI layout, 用那些CAD软件公
司的产品来layout大规模集成电路. 第三个，电路板公司印刷电路板布线，也是用CAD
软件来做，熟悉软件就行了，一般layout做得不好，可以怪电路设计的人没有把那些要
求跟你讲清楚，当然如果想自己提高的话，就得了解EMI这些东西，这样可以将自己的
工作做得跟好。 |
|
s*******e
发帖数: 13 | 24 Here is the job description.
Will be part of analog design team for storage product. Design state-of-the-
art deep sub-micron CMOS analog front end for our high performance storage
products.
Masters degree plus 2~3 years of industry experience or PhD in the field of
analog IC design Experience in transistor-level design of one or more of the
following areas are required: ADC, DAC, Analog filter, VGA, wideband
amplifier, High performance voltage regulator, or PLL.
Strong understanding of analog c... 阅读全帖 |
|
l******1
发帖数: 85 | 25 拿到一个ARM memory design group 的onsite. 求复习建议。。看job description上
大多关于transistor level，memory,RTL coding的知识。。准备了半天。。电面的时
候问了好多 verification的东西。。觉得答得不太好。。。反到拿到onsite了。。真
心求建议。。贴个job description..
Accountabilities
Contribute in all parts of the memory development flow, starting at
design spec
Understand memory design and development in advanced technology (45nm
and beyond)
Perform physical verification, memory characterization, FE verification,
release procedure and QA flow of the memory compilers
Exp... 阅读全帖 |
|
d********3
发帖数: 899 | 26 This individual will be a key member of the design team. The candidate will
participate in the product definition process with marketing and customers
and be involved in all aspects of the IC design cycle from the architectural
concept phase through back-end release to production. He/she will also have
the opportunity to routinely interface with the MEMS designers to
contribute at a system level (MEMS + ASIC). The candidate should be self-
motivated and an excellent team player with superior co... 阅读全帖 |
|
s*****3
发帖数: 1673 | 27 0.18um 是指的可以print最小的CD (critical dimension). 0.2um应该是可以print出
来的.
至于你说的，0.2005um, 既然你都关心到 nm level了，那肯定是做不出那么精确的。
layout 不是画了多精确就可以print出来的，还与photoresist, stepper等有关。而且
mask一般也是用e-beam来写，也是有limit的。你layout上画了0.2005um实际做出来的
可能只有0.19um.
一般还有一个关心的参数是 delta CD. 看你实际print的dimension和你layout上画的
差别有多少。
还有一个问题是能否repeat,你即使能做出来0.185um，但是随便一个条件shift一下你
就得不到之前的结果了。
My 2 cents. |
|
p********6
发帖数: 65 | 28 朋友组里面的职位，Manager 人很好，他们希望能找一个会讲中文的申请者，因为有时
需要跟大陆和台湾的公司打交道。可以直接公司网页申请，或者发信到freewheelin@
gmail.com
Hardware Engineer
Apply Now Apply now
Date: Jul 6, 2015
Location: Santa Clara, CA, US
Hardware Engineer
Location
US- CA, Santa Clara
Req # 26441
Functional Area
Supply Chain Management
Preferred Experience
Senior Level
Preferred Education
Bachelors Degree
Position Summary
Citrix is a leading provider of virtual computing solutions that help people
work and play from anywhere, on a... 阅读全帖 |
|
c*******c
发帖数: 726 | 29 帮转，朋友是hiring manager，有意可站内私信
Broadcom Memory Designer, All level, Irvine, CA
----------------------------------------------------------------------------
------
Job Description:
Memory Circuit Design Engineer
We are looking for energetic and passionate memory design engineers to join
our Central Engineering Group and be part of an elite memory team
responsible for the development of memory compilers and custom macros of all
types on the bleeding edge of process technology. Typically requires a
m... 阅读全帖 |
|
m*****e
发帖数: 44 | 30 小弟用Pro-e 和 Solidworks也有些时间了，不过一直是在小公司，用盗版，所以一直
有个问题没有搞清楚。最近想换工作到大些的正式公司去，请务必帮我。
如果用AutoCAD画图，可以在装配图中清楚的观察零件间的尺寸关系，比如中心线间的
关系，而忽略一些次要关系，比如板的厚度，杆的具体直径等，简单说就是Layout的功
能很清晰。但是在3D 的Model中，我发现我的精力都用在一些细枝末节的地方，而且零
件多了以后就看不清互相的关系了，感觉我是在跳过Layout，直接画零件图，虽然我仍
然在装配图中工作。有什么办法解决这个问题吗？在Pro-E或者Solidworks里能画
Layout吗？ |
|
w*******y
发帖数: 60932 | 31 This app is fun. When I'm lazy to open photoshop and do it my way this app
delivers.
LINK:
http://itunes.apple.com/us/app/halftone/id419957803?mt=8
Halftone adds an aged halftone-style printing effect to photos to give them
a unique, vintage look. With 21 paper styles, nine built-in layouts, two
caption styles, six different speech balloon styles, and the ability to
choose a font (including an embedded font called Digital Strip), photos can
be customized, then saved to the photo album, sent via ... 阅读全帖 |
|
k***t
发帖数: 40 | 32 我是看不惯一些傻B 把自己在波士顿的龌龊生活环境和居住条件描述的好像比在国内建
设家园的人好到天上去了。
大波士顿区的layout多么不合理，星罗棋布的ugly house占用了多少土地？每一个
house yard就对应4个土地死角无法利用。药厂每天去Cambridge上班的人走I93-south,
I-90 east上下班都堵死，而这里的公共交通质
量之差，和德国 比利时 法国 没法比，更别和中国同等经济地位的沿海地区比了。新
加坡比波士顿更方便生活更干净条理 交通更便捷，更现代化，科学规划更合理。波士
顿压根没有科学规划，这１００，２００年前
的layout延伸的今天，已经非常不合理。去新加坡住１周，回来看看波士顿，metro
boston地区就是个烂城，什么Lexington, Newton, 你可以说是好学区，我也可以说竞
是些junk home, 没有科学规划，乱七八糟。
Boston郊区 40万的crappy wood-board junk home 是我不屑于去住的。那些烂房子15
年前撑死也就12万。买卖房子的agent（中学毕业就能干的事情）开的车个个都比你的
好。 |
|
m******e
发帖数: 536 | 33 新出炉国产大型运输机Y-20卫星照片,由美帝卫星于去年１２月２５日在西安阎良机场
拍到。文章贴在下面了。
Satellites Spot China’s Mysterious New Warplane
By David Axe01.04.136:38 PM
A week after the publication of blurry photographs depicting what appears to
be China’s first long-range jet transport, Danger Room has obtained
satellite imagery of the new plane at an airfield in central China.
The images, acquired by the GeoEye 1 and IKONOS spacecraft — both belonging
to commercial satellite operator GeoEye headquartered in Washington, D.C.
— corrob... 阅读全帖 |
|
O*******d
发帖数: 20343 | 34 波音747-400。 日本用改装型的飞国内航线。 安装了500多个座位。最多可以安660个
座位
The 747-400, the most common passenger version in service, is among the
fastest airliners in service with a high-subsonic cruise speed of Mach 0.85
–0.855 (up to 570 mph or 920 km/h). It has an intercontinental range of 7,
260 nautical miles (8,350 mi or 13,450 km).[11] The 747-400 passenger
version can accommodate 416 passengers in a typical three-class layout, 524
passengers in a typical two-class layout, or 660 passengers in a high
density one-... 阅读全帖 |
|
W*****d
发帖数: 4196 | 35 Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU
E-mail: s*[email protected], s***[email protected]
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at
Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated
Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof.
Dennise K. Lieu
M. S... 阅读全帖 |
|
发帖数: 1 | 36 12月10日 可能的历史
前一天夜晚我一夜没睡，因为那一天晚上有人被扔下下水道了，我不知道是不是我的孩
子。因为前一天孩子上学前要一张小时候的照片，我想也许他想留个纪念。照片一直都
放在女儿房间储藏室，所以，我搬了椅子上去拿他的相册，儿子的照片有两本，我拿的
是那本我和先生共同给他建立的那一本，给了他在我肚子里的一张照片。 很可能他们
没有如愿离开。我不知道发生了什么，我在楼下听儿子说照片是他拿的 （他怕他们伤
害我？主动承担责任？）。然后他房屋的门被锁上，我担心我的儿子被他们害了。我很
长时间都没有去看那些照片，因为我曾经浏览过，都是过去的照片。而最新的照片都被
他们偷走了，特别是关于女儿的照片偷的一干二净。我没事，就把相册都抱下来再次查
看，发现很多东西被篡改或擦掉了，就连合影也是被合成的。为了防止所有的照片被销
毁，我就把他们都收起来了。其实，很多时候，我不是不知道某个人不是我的丈夫，而
是我不希望每一个人遇害，所以我沉默。我是不知道我先生如果还活着，如果一个被折
磨的人，会变成怎样？ 我无法知晓。但过去的他，即使没有照片，我也逐步忆起。有
一些人，我会有困惑，但有一些人，我... 阅读全帖 |
|
o*********e
发帖数: 3093 | 37 月光阿姨，我问你，我刚刚想在自己电脑上装Drupal来玩玩，结果出现这么多问题，咋
整？
是哪些问题造成怎么多问题？
Skip to main content
Drupal 8.4.3
Installation tasks
Choose language
(active)
Choose profile
Verify requirements
Set up database
Install site
Configure site
Choose language
Error message
Deprecated function: assert(): Calling assert() with a string argument is
deprecated in DrupalCoreCacheMemoryBackend->set() (line 101 of
corelibDrupalCoreCacheMemoryBackend.php).
DrupalCoreCacheMemoryBackend->set('module_implements', Array) (Line: 359)
D... 阅读全帖 |
|
M******a
发帖数: 6723 | 38 【 以下文字转载自 Mod_CHN_Hist 讨论区 】
发信人: Mayingba (吳鐘學), 信区: Mod_CHN_Hist
标 题: 奉天兵工厂
发信站: BBS 未名空间站 (Sun Jan 28 20:29:57 2018, 美东)
https://wwiiafterwwii.wordpress.com/2017/04/03/mukden-arsenal-after-wwii/
Mukden Arsenal after WWII
April 3, 2017 jwh19752 Comments
(Zhang's Gate, the old entrance to Mukden Arsenal)
For people interested in Japanese firearms of WWII, the name Mukden Arsenal
is familiar. The history of the facility after Japan's defeat is less well
known. Under various names, it did surv... 阅读全帖 |
|
z****g
发帖数: 3509 | 39 I. FINDINGS OF FACT.
A. The Goldfish Arrests.
On March 12, 1988, at approximately 2:00 p.m., PRC police officials arrested
Wang on the streets of Shanghai. Four men approached Wang, kicked him, and
dragged him along in the street and into a waiting car; once in the car,
Wang was blindfolded, kicked again, and sworn at by the arresting officers.
Wang knew he was being arrested for his participation in a heroin
transaction.
The officers took Wang to the Chang-Ning Branch of the Shanghai Public
Sec... 阅读全帖 |
|
g****t
发帖数: 4493 | 40 楼主特地用了一个unrooted的layout
用rectangular的layout看，很明显武汉是源头 |
|
m******e
发帖数: 536 | 41 【 以下文字转载自 Military 讨论区 】
发信人: meditate (meditate), 信区: Military
标 题: 新出炉国产大型运输机卫星照片
发信站: BBS 未名空间站 (Sat Jan 5 00:52:31 2013, 美东)
新出炉国产大型运输机Y-20卫星照片,由美帝卫星于去年１２月２５日在西安阎良机场
拍到。文章贴在下面了。
Satellites Spot China’s Mysterious New Warplane
By David Axe01.04.136:38 PM
A week after the publication of blurry photographs depicting what appears to
be China’s first long-range jet transport, Danger Room has obtained
satellite imagery of the new plane at an airfield in central China.
The images, acquired by the... 阅读全帖 |
|
a******e
发帖数: 5411 | 42 To the OP -----
Can you explain the longitudinal engine layout in an Audi A4?
It looks like a RWD layout, isn't it? |
|
l******a
发帖数: 3803 | 43
/800px-Saab_900_GLE_%282%29_%28crop%29.jpg
Manufacturer Saab Automobile
Production 1978–1993 (1994)
Assembly Trollhättan, Sweden
Arlöv, Sweden
Uusikaupunki, Finland (Valmet Automotive)
Predecessor Saab 99
Successor Saab 900 (NG)
Class Entry-level luxury car/Compact executive car
Body style 2-door convertible
2-door notchback
3-door liftback (hatchback)
4-door sedan
5-door liftback (hatchback)
Layout FF layout
Engine 2.0 L B I4
2.0 L B201 I4
2.0 L B202 I4
2.1... 阅读全帖 |
|
J*******3
发帖数: 1651 | 44 丰田2013年6月6日公开了预计将于年内作为2014年款投放市场的新一代“卡罗拉”（北
美版）的概要，价格及详细性能指标将在临近上市时发布。
这是第11代卡罗拉，为了吸引更年轻的用户而非维持以往用户，继“Avalon”
及“RAV4”之后，丰田再次采用了个性强烈的外观设计。前脸以较扁的前大灯以及下部
带大开口的保险杠等为特点，并搭配大幅膨出的翼子板以及向后平缓下滑的C柱。
新款卡罗拉的外形尺寸为长4639×宽1776×高1455mm，与上代车型相比车长增
加99mm，车宽扩大16mm，但车高降低10mm。轴距为2700mm，比上代车型长100mm。由于
轴距更长，因此后座臀点后移了75mm，另外还通过减薄前座靠背，使后座乘坐空间变得
宽敞。
图2：“LE Eco”的后视图 （点击放大）
图3：侧视图 （点击放大）
图4：LE Eco的内装 （点击放大）
图5：S的内装 （点击放大）
新一代卡罗拉设有“L”、“LE”、“S”和“LE Eco”四种级别。前三个级别
的款... 阅读全帖 |
|
l********i
发帖数: 8858 | 45 from wiki:
Front-wheel-drive arrangements
Most FWD layouts are front-engined. Rear-engined layouts are possible, but
rare. Historically they fall into three categories:
Front-engine transversely mounted/ Front-wheel drive
Front-engine longitudinally mounted/ Front-wheel drive
Front Mid-engine/ Front-wheel drive
前驱就是引擎只负责驱动前轮 前驱 和 前置 没有必然联系 只是普遍而言 前驱车因
为成本原因发动机前置
文科生容易在概念上就错了 所以garbage in garbage out.
weight distribution 是另外一个概念 这个会影响操控 进而扭力分配的设计 不过好
像跟前驱扯不上关系 就不要拿这个做文章了 |
|
region="vim_icon" />